YPE="text/css">


BRIOS2

ver 1.04 eng 2001-04-18



BRIOS2 Binar Remote Input Output System 2
Data sheets
ver 1.12 eng 2002-09-09
part no. 37041

Binar AB
(publ)

Batterivägen 4
SE-461 38 TROLLHÄTTAN
tel: +46 520-47 32 00
fax: +46 520-47 32 10
e-mail: info@binar.se
website: www.binar.se
VAT No. SE556246199501

This document is copy-protected and all rights are the property of Binar AB. This document must not be
photocopied or translated, either in whole or in part, without the written permission of Binar AB. This
document contains information which is subject to copyright, and must not be used or divulged to a
third party without the written permission of Binar AB.

Note Updated versions of this document can be downloaded
from our website www.binar.se
Contents

BRIOS2

ver 1.05 eng 2004-05-06


Contents
1 General Description
2 Fieldbus couplers
Type
Description

CAN (DeviceNet)
750-306
Buscoupler DeviceNet
750-306L Buscoupler DeviceNet Light-version (digital I/O modules only)
750-346
Buscoupler DeviceNet ECO (Economy)
PROFIBUS
750-303
Buscoupler PROFIBUS-DP
750-323
Buscoupler PROFIBUS-DP Light-version (digital I/O modules only)
750-343
Buscoupler PROFIBUS-DP ECO (Economy)
Ethernet Programable Fieldbus Controllers
750-841
PLC Ethernet (10/100 kBit/s)
750-842
PLC Ethernet (10 kBit/s)
3 Digital Inputs
Type
Chan Inp.filter Switching Description
5V DC
750-414
4
0.2 ms Positive
2-conductor connection
24V DC
750-400
2
3 ms Positive
2 to 4-conductor connection
750-401
2
0.2 ms Positive
2 to 4-conductor connection
750-410
2
3 ms Positive
2 to 4-conductor connection, Proximity switch
750-411
2
0.2 ms Positive
2 to 4-conductor connection, Proximity switch
750-419
2
3 ms Positive
2 to 3-conductor connection, with Diagnostics

750-402
4
3 ms Positive
2-conductor connection
750-403
4
0.2 ms Positive
2-conductor connection
750-408
4
3 ms Negative 2-conductor connection
750-409
4
0.2 ms Negative 2-conductor connection

750-430
8
3 ms Positive
1-conductor connection
750-431
8
0.2 ms Positive
1-conductor connection
24V AC/DC
750-415
4
20 ms Positive
2-conductor connection
750-423
4
50 ms Positive
2-conductor connection, with Power jumper contacts
48V DC
750-412
2
3 ms Positive
2 to 4-conductor connection
120V AC
750-406
2
10 ms Positive
2 to 4-conductor connection
230V AC
750-405
2
10 ms Positive
2-conductor connection
NAMUR
750-425
2

Proximity switch acc. to DIN EN 50227
Type
Chan Inp.filter Description
Counter Modules
750-404
1/2
0.2 ms Up/Down Counter 32-bit/16-bit

Contents

BRIOS2

ver 1.05 eng 2004-05-06


4 Analog Inputs
Type
Chan
Resol.
V.max Description

0 20 mA
750-452
2
12-bit
35V
Differential
750-465
2
12-bit
35V
Single ended
750-472
2
16-bit
24V
Single ended, Overload protection

4 20 mA
750-454
2
12-bit
35V
Differential
750-474
2
16-bit
24V
Single ended, Overload protection
750-466
2
12-bit
35V
Single ended

0 10 V
750-478
2
16-bit
24V
Single ended

750-468
4
12-bit
35V
Single ended

+/- 10V
750-456
2
12-bit
35V
Differential
750-476
2
16-bit
24V
Single ended

Others
750-461
2


RTD (Resistive temperature device) PT100
750-469
2


Thermocouples type J,K,B,E,N,R,S,T,U,L.
Open-circuit recognition
750-491
1


Resistor bridges (DMS)
5 Digital Outputs
Type
Chan
Curr. Switching Description

5V DC
750-519
4
0.02 A Positive
Short-circuit-protected

24V DC
750-501
2
0.5 A Positive
Short-circuit-protected
750-502
2
2.0 A Positive
Short-circuit-protected
750-506
2
0.5 A Positive
Short-circuit-protected, with Diagnostics
750-507
2
2.0 A Positive
Short-circuit-protected, with Diagnostics

750-504
4
0.5 A Positive
Short-circuit-protected
750-516
4
0.5 A Negative
Short-circuit-protected

750-530
8
0.5 A Positive
Short-circuit-protected

Type
Chan Type
Switching voltage/current
Description

Solid State Relays
750-509
2

AC/DC 230V/0.3A

750-522
2

AC/DC 230V/0.5A (3A for <30s)


Relays
750-514
2
Changeover cont.
AC:125V/0.5A, DC:30V/1A
Insulated outputs
750-517
2
Changeover cont.
AC:230V/1A, DC:300V/1A
Insulated outputs
750-512
2
Making contacts
AC:230V/2A, DC:30V/2A
Non-floating
750-513
2
Making contacts
AC:230V/2A, DC:30V/2A
Insulated outputs

Type
Chan Switching Description
750-511
2
Positive
Pulse width module, 24V 0.1A Short-circuit-protected

Contents

BRIOS2

ver 1.05 eng 2004-05-06


6 Analog Outputs
Type
Chan
Resol.
Description

0 20 mA
750-552
2
12-bit
Single ended

4 20 mA
750-554
2
12-bit
Single ended

0 10 V
750-550
2
12-bit
Single ended

+/- 10V
750-556
2
12-bit
Single ended
7 End and Supply Terminal Blocks
Type
Voltage
Fuse max curr.
Description

24V DC - Power supply modules
750-601
24VDC
6.3A 6.3A
Without Diagnostics
750-602
24VDC

10A
Without Diagnostics, passive
750-610
24VDC
6.3A 6.3A
With Diagnostics

24V DC - Power supply modules with bus power supply
750-613
24VDC

10A field side
2A intern. side Supply module for both field and internal side

120V AC - Power supply modules
750-615
120VAC
6.3A 6.3A
Without Diagnostics

230V AC - Power supply modules
750-609
230VAC
6.3A 6.3A
Without Diagnostics
750-611
230VAC
6.3A 6.3A
With Diagnostics
750-612
230VAC/DC
10A
Without Diagnostics, passive

Field side connection module
750-614
230VAC/DC
10A
Voltage distribution

Separation modules
750-616



Separation module
750-621



Separation module with power contacts

End module
750-600



End module to loop the internal bus
8 Encoders
and
Resolvers
Type
Description
750-630
SSI Transmitter Interface
750-631
Incremental Encoder Interface. TTL level squarewave
750-637
Incremental Encoder Interface. RS422, with cam outputs
9 Communication
Interfaces
and
Miscellaneous
Type
Description
750-650
Serial Interface RS232C
750-651
Serial Interface TTY, 20mA Current loop
750-653
Serial Interface RS485C

Contents

BRIOS2

ver 1.05 eng 2004-05-06



General

BRIOS2
ver 1.01 eng 2002-09-06


1
General
BRIOS2 The Universal Basic Module
BRIOS2 General description
BRIOS2 Housing


General

BRIOS2
ver 1.01 eng 2002-09-06


WAGO Kontakttechnik GmbH
Postfach 2880 D-32385 Minden
Tel.: 05 71 / 8 87-0
E-Mail: info@wago.com
Hansastr. 27 D-32423 Minden
Fax.: 05 71 / 8 87-169
Web: http://www.wago.com
The universal basic module
Assembly
Power jumper contacts on the field side
Fine modularity for the assembly on
the rail . . .
. . . secure connection with dovetails
Quick exchange of a I/O module. . .
. . . within the assembly without tool
Exchange within the assembly
Data contacts
Safe, automatic connection by tinned, self-cleaning slide contact, ground (earth) contact makes first and
breaks last
B x H *x T (mm) 12 x 65 x100
* from upper edge of carrier rail
Safe, automatic connection by gold-plated, self-cleaning slide contacts
with high contact safety
H
B
T
The I/O Module
Subject to design changes
08.10.2001
Page 1(2)
ver 1.00 eng 2002-07-16
Batterivägen 4 SE-461 38 TROLLHÄTTAN
tel +46 (0)520 47 32 10 fax +46 (0)520 47 32 10
e-mail: support@binar.se website: www.binar.se
BRIOS2 I/O System Obvious handling by color coding
Marking of clamping units by colored miniature
WSB markers
Moulded marking of clamping units
CAGE CLAMP
®
connection
Status indication
Testing
Group marking carrier (can be withdrawn and
replaced) with large area for self marking
Different functions marked by transparend colo-
red group marker carriers
Vibration-proof, fast and maintenance-free
wiring of 0.08 mm
2
- 2.5 mm
2
/AWG 28 - 14
Function at locked position 1:
Power output to I/O group is off
Function at locked position 2: Easy fuse replacement via hinged cover.
Use UL-Recognized fuses only!
Diagnosis and status indication by LED for safe
start-up and system control
Signal tracing with wired conductors
Fuse holder
yellow
digital inputs
red
digital outputs
green
analog inputs
blue
analog outputs
colorless supply and special
function modules
Subject to design changes
08.10.2001
Page 2(2)
ver 1.00 eng 2002-07-16
Batterivägen 4 SE-461 38 TROLLHÄTTAN
tel +46 (0)520 47 32 10 fax +46 (0)520 47 32 10
e-mail: support@binar.se website: www.binar.se
BRIOS2 General

BRIOS2
ver 1.01 eng 2001-04-18


BRIOS2 - General

The BRIOS2 I/O system consists of various components which are capable of providing modular and application spe-
cific fieldbus nodes.
A fieldbus node consists in principle of a fieldbus coupler (buscoupler) at the left end, a number of special function
modules, and a termination module which is placed at the other end.
Buscoupler
The buscoupler forms the link between the fieldbus and the field devices with their I/O functions. All control functions
required for the faultless operation of the I/O functions are carried out by the buscoupler.
Function modules
Corresponding to the different requirements, special function modules are available for a variety of functions.
Termination module
A termination module is needed for faultless operation in the node. The termination module