rstanding how and where potential EMI
problems exist within your system can be a major
challenge. Uncovering the best way to address both
conducted and radiated EMI can reduce your costs
and keep your project on budget/schedule. Our
experienced engineering and test team can help
you find the ideal solution to satisfy global EMC
standards, while meeting your design parameters.
Most Complete EMI Line
We offer the flexibility to filter EMI at the power source,
at the I/O connection, in a barrier wall or on the PCB.
Our industry-leading line includes inductors, glass and
resin seal filters, SMT filters, filter plates, filtered connectors,
power entry and power line filters, and military/aerospace
multisection filters... most available RoHS compliant.
Low Cost Manufacturing
Our commitment to be the worlds most efficient EMI
filter manufacturer has resulted in only using the best
technology and people for our global network of design
and manufacturing facilities. Our ability to achieve this goal
is strengthened by our new 75,000 sq. ft. manufacturing
plant in Guang Dong, China and our state-of-the-art plant
in Juarez, Mexico.
MIL Qualified Products
We offer over 800 standard QPL products & DSCC part
numbers. Look to us for the largest number of MIL-PRF-
15733, MIL-PRF-28861, DSCC 84084 and M11015 filters.
Whether a COTS buy or engineered solution, were the
ideal source for your design.
EMI Design & Testing Support
Integral to solving EMC problems is the ability to test
for compliance. We conduct a wide range of EMC and
environmental tests and use that data in our design
process. The result is the most comprehensive EMI
evaluation and design resource available.
Meet Vendor Reduction Goals
The breadth of products within the EMI Filter & Components
Group alone can help you reduce your sourcing base.
Combined with our sister divisions of Microwave, Power
Management, and Sensors & Controls, youve got a real
opportunity to reduce suppliers and lower overall costs.
CERTIFIED
for
Military/Aerospace
Filtered D-Sub
Connectors
Circular
Connectors
EMI
Filter Plates
Multi-
Section
Power Filters
Low Pass
EMI Filters
Gaskets
& Shielding
and
Commercial
Low Pass
Filters
Power
Feed-Thru Filters
Filtered
Connectors
EMI
Filter Plates
Surface
Mount EMI Filters
Power
Entry Filters
Combo
Connectors
AHA
6/08
10M
27-0027-0047
©2008 Spectrum Control, Inc.
Printed in U.S.A.
Signal & Power Integrity
8061 Avonia Road
Fairview, Pennsylvania 16415
Phone: 814-474-1571
Fax:
814-474-3110
Corporate Headquarters
8031 Avonia Road
Fairview, Pennsylvania 16415
Phone: 814-474-2207
Fax:
814-474-2208
Sales Offices
NORTH AMERICA
8061 Avonia Road
Fairview, Pennsylvania 16415
Phone: 814-474-1571
Fax:
814-474-3110
EUROPE
Spectrum Control GmbH
Hansastrasse 6
91126 Schwabach, Germany
Phone: (49)-9122-795-0
Fax:
(49)-9122-795-58
CHINA
Spectrum Control Limited
2nd Industrial Area
Ling Tou Industrial Road
Qiad Tou Town, Dong Guan City
Guang Dong Province 523530
Peoples Republic of China
Phone: (011)-86-769-8343-7761
Fax:
(011)-86-769-8343-7760
Spectrum Control, Inc. reserves
the right to alter the specifications
provided in this publication.
Represented or Distributed by:
Signal & Power Intergrity
Ferrite beads & inductors
Surface mount filters
Discrete EMI filters
Filter plates
Filter connectors
Gaskets & shielding
Ceramic capacitors
Patch antennas & assemblies
Single line filters
Filtered terminal blocks
Power entry & power line filters
Military/multisection filters
EMC testing
www.Specemc.com
Microwave Components
& Systems
Lumped element filters
Cavity filters
Bandpass filters & duplexers
Tubular & waveguide filters
Tower mount amplifiers
Coaxial resonators
Switchable filter bank assemblies
Low noise amplifiers
Local oscillator doublers
Microwave synthesizers
Couplers
Integrated microwave sub-assemblies
www.SpectrumMicrowave.com
Power Management Systems
AC/DC power distribution units
& remote reboot
power management systems
Circuit protection
Custom assemblies
Power strips
www.SpecPower.com
Sensors & Controls
Rotary & linear precision potentiometers
Motorized & hollow shaft potentiometers
Element segments & wiper assemblies
Temperature probes & assemblies
PTC & NTC thermistors
RTD sensors
www.SpecSensors.com
Signal & Power Integrity
www.Specemc.com
CERTIFIED GASKETS
I
Discoidals
.080 to 0.600 in. diameter
50 to 500 Volt
NPO, X7R and Z5U
ceramic available
I
Tubular Capacitors
Feed-through and Pi circuit
0.081 to 0.122 in. diameter
50 to 200 Volt
I
Switch Mode Power Supplies
BP, BX, BR or BQ ceramic
available
Lead options in, out or straight
50 to 500 Volt
I
Insertion loss range
Effective filtering to 18 GHz
in a shielded application
I
Capacitance
Pi: 68 pF to 8200 pF
Feed-thru: 68 pF to .01 µF
I
Temperature range
-55°C to +125°C
Three Terminal Ceramic
EMI Filter Chips
I
Voltage
Up to 100 VDC
I
Current
Up to 2 Amps
I
Capacitance
Up to 220,00 pF
LC Type Ceramic
EMI Filter Chips
I
Cut-off frequency
Up to 220 MHz
I
Voltage
25 VDC
I
Current
100 mA
PMS 8182 (spot metallic)
Applications
Featur
es
/
Benefits
Per
for
mance
Characteristics
EMI FILTERS, FILTERED INTERCONNECTS & POWER FILTERS
Ceramic
Components
Power Surface
Mount (PSM)
Square Surface
Mount (SSM)
Filters
Three
Terminal and
LC Filter
Chips
Resin Sealed/
Solder-in
Capacitors and
Filters
I
Insertion loss range
Effective filtering from
1 MHz to 18 GHz with
proper installation
I
Capacitance and
temperature characteristics
To 1.4 µF NPO, X7R, Y5V, Z5U
I
Temperature range
-55°C to +125°C
I
Voltage ratings (max.)
To 2500 VDC
240 VAC @ 400 Hz
I
Current ratings (max.)
To 100 Amps
Patch Antenna
Elements &
Assemblies
Hermetically
Sealed Filters
and Capacitors
Filter Plates &
Shrouded Latch
Plates &
Assemblies
Microwave
Discrete
Filters
Low Cost Ferrite
or Feed-Thru
Filtered D-Sub
Connectors
I
Insertion loss range
Effective insertion loss
from 1 MHz to 18 GHz
with proper installation
I
Capacitance
2500 pF
I
Temperature range
-55°C to +105°C
I
Voltage ratings (max.)
Barrier: to 250 VAC
European: to 100 VDC
I
Current ratings (max.)
Barrier: 20 Amps
European: 12 Amps
I
Insertion loss range
1 MHz to 18 GHz and beyond
I
Capacitance and
temperature characteristics
To 5600 pF - .047 µF
NPO, X7R, Z5U
I
Temperature range
-40°C to +105°C
I
Voltage ratings (max.)
500 VDC
I
Current ratings (max.)
5 Amps
I
Performance Attributes
Capabilities from 900 MHz
to 5.8 GHz
Optimization for specific
applications
High Gain/Low return Loss
Circular polarized with linear
capabilities
Low frequency drift vs.
temperature
Offset single-point feeding
method
Omni-directional
I
Impedance
50 Ohm Standard
I
Insertion loss range
Effective filtering to 18 GHz
in a shielded application
I
Capacitance
Up to 30,000 pF
I
Operating voltage
Up to 200 VDC
I
Temperature range
-55° to +125° C3
I
Insertion loss range
Effective filtering from
1 MHz to 18 GHz with
proper installation
I
Capacitance and
temperature characteristics
To 1.4 µF NPO, X7R, Z5U
I
Temperature range
-55°C to +125°C
I
Voltage ratings (max.)
To 400 VDC
240 VAC @ 400 Hz
I
Current ratings (max.)
To 30 Amps
I
Insertion loss range
Effective insertion loss from
1 MHz to 18 GHz with
proper installation
I
Capacitance
Pi: 68 pF to 5000 pF
Feed-thru: 68 pF to 4000 pF
I
Temperature characteristics
NPO, X7R, Y5V, Z5U
I
Temperature range
-55°C to +125°C
I
Voltage ratings (max.)
To 250 VDC
I
Current ratings (max.)
To 5 Amps standard
Filtered
Combo
Connectors
High Performance
Filtered
D-Subminiature
Connectors and
Adapters
Custom
Circular
Connectors
Quietshield
Gasketing &
Shielding
I
Insertion loss range
1 MHz to 18 GHz and beyond
I
Capacitance and
temperature characteristics
47 pF to 5600 pF (chip)
I
Temperature range
-55°C to +125°C
I
Voltage ratings (max.)
1000 VDC
I
Current ratings (max.)
Signal: 5 Amps
Power: 40 Amps Std
I
Shielding
Superior shielding effectiveness
of 70 dB between 1 MHz to 18 GHz
I
Insertion loss range
1 MHz to 18 GHz and beyond
I
Capacitance and
temperature characteristics
To 5000 pF
NPO, X7R, Y5V, Z5U
I
Temperature range
-55°C to +125°C
I
Voltage ratings (max.)
1000 VDC
I
Current ratings (max.)
5 Amps
Filtered &
ESD Protection
Datacom
Connectors
I
Insertion loss range
Effective insertion loss
from 1 MHz to 18 GHz with
proper installation
I
Capacitance and
temperature characteristics
To 0.1 µF
COG, X7R, Z5U
I
Temperature range
-55°C to +125°C
I
Voltage ratings (max.)
125 VAC @ 400 Hz
up to 1000 VDC
High Current
Feed-thru Filters
Power
Entry
Modules
I
Current ratings (max)
To 500 Amps
I
Voltage ratings (max)
To 1000 VDC and to 240 VAC
I
Insertion loss range
AC: 1 MHz to 1 GHz
DC: 150 KHz to 10 GHz
High performance options
available with IL up to 100 dB
I
Temperature range
-55°C to +125°C
I
Capacitance
4.7µF max
Class Y2 and Y4 available
I
Current ratings (max)
Up to 15 Amps
Switched/Fused 2, 4, and 6 Amps
I
Voltage ratings (max)
From DC to 250 VAC, 60 Hz
I
Insertion loss range
Effective filtering from 100 KHz
to 30 MHz
I
Temperature range
-25°C to +85°C
I
Leakage current
0.35 mA to 0.50 mA max for
general purpose filters
0.005 mA to 0.10 mA max
for medical filters
Military/Aerospace
Multisection
Filters & Custom
Commercial
Assemblies
I
Current ratings (max)
Up to 250 Amps
I
Voltage ratings (max)
400 VDC and 250 VAC standard;
custom voltage ratings available
I
Insertion loss range
Effective filtering from 10 KHz
to 10 GHz
I
Temperature rang