DC components of a
renewable energy power conversion system.
The PSDC saves time, money and space by combining the disconnects, overcurrent protection
devices, grounding and control components into an easy to install, single enclosure.
The PSDC is easily modified and expanded as your system grows or changes.
Optional Components

15, 30, 60, 100, 175 & 250 amp DC rated breakers for DC inputs/loads and power inverters

OBDC-GFP/2 - Dual 60 amp PV ground fault protection system for two PV charge controller.
Multiple DC-GFP/2 can be used on the same system up to four can be installed in a PSDC

CCB - Charge controller bracket for up to three additional C-series controllers on either side

TBB Insulated terminal bus bar kit for combining or distributing multiple circuits

GBB - Ground bus bar kit for isolating the negative from ground (included with GFP/2 system).

VREA - Adapter plates for direct connection of a PSDC to one Vanner RE inverter/charger

PSA Adapter plate for direct connection of a PSDC to one PS series inverter/charger

MP - Mounting Plate for assembling a complete power system 36 wide x 50 wide x 1 thick
- for one PSDC, one PSAC and one or two inverter/chargers split design to allow UPS shipping
Physical Dimensions
PSDC enclosure: 16 wide x 9 deep x 32.5 tall (40.6cm x 22.8cm x 82.5cm)

Shipping size: 12.75 x 36 x 19.5 Weight: 38 pounds (17.3 kG) + options


Standard Features and Components

ETL listed indoor type powdercoated steel
enclosure with plenty of conduit knockouts

Mounting space for up to four large 1.5 wide
175 or 250 amp or six medium 1.0 wide 60 to
100 amp breakers sizes can be mixed

Ten spaces for small 0.75 wide 15, 30 or 60 amp
breakers and OBDC-GFP/2 (uses 3 spaces)

500 amp 50 mV current shunt standard

Battery negative/ground bus bar standard

Battery positive bus bar for DC loads and PV
arrays included standard

Designed to mount directly to the DC end of 1
or 2 Trace DR or SW series inverters without
needing additional conduit boxes or fittings

Easily connected to other inverter models and
enclosures via conduit or raceway

Knockouts on top for two RVPP Solar Boost or
three C-series controllers

Available with or without the circuit breakers and
other options pre-installed

For negative or positive ground systems
OutBack Power Systems, Inc. 10/10/2001Rev 2.02
P O W E R S Y S T E M D C
OutBack Power Systems, Inc.
Tel 360.435.6030 Fax 360.435.6019
19009 62nd Ave NE, Arlington, WA 98223 USA www.outbackpower.com

Finally
an
alternative
to
Brand
X