ow is a cache of http://www.magnet-tech.com/PDF/Metallic/introduction.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
metallic powder core,iron powder material,FeNi50 material,ALSiFe,Carbonyl-Fe,FeNiMo
metallic powder core,iron powder material,FeNi50 material,ALSiFe,Carbonyl-Fe,FeNiMo
China Professional Ferrite Core Supplier
Metallic Powder cores

Introduction

Characteristics

Iron Powder
Material

FeNi50 Material
p
Metallic Powder Core Introduction
INTRODUCTION
Our metallic powder core including five kinds of metallic material, Fe, FeNiMo, FeNi50, ALSiFe, Carbonyl-Fe,
which can be used in various application Iron powder as a core material has been widely used. The distributed
air gap properties in iron powder cores also make them extremely well suited for a variety of energy storage
inductor applications. Iron powder cores is a Cost-Effective design. It can also be used in place of ferrite and iron-
alloy lamination requiring a gap.
TEMPERATURE EFFECTS
Metallic powder cores are fitted for temperature range from 65 to +125 . Highest working temperature of
type H and Y(with special coat)is 300 . Highest working frequency is 600kHz. Testing condition: U=0.3V,
=0.3mm Or 0.5 wire, N=10 wires, f=300kHz. When cores are placed in higher temperature, it will make
inductance and quality factor (Q) to perpetually decrease. Change in this character is depended on time,
temperature core, size and frequency and flux density etc.
FINISH
Toroidal iron powder cores and Bus bar cores, manufactured by our company, are well finished with protecting
paint. The minimum dielectric strength of coating is 600Vrms under 50Hz.The dielectric strength also may be
increased according to the needs of customer. The surface of E-shaped and U-shaped cores are treated with
antirust material. We suggest the user to carefully store the untreated products to avoid moist and rain.
APPLICATION
Our products mainly used in DC output choke, different mode input choke, power factor correcting inductor,
continuous mode flyback inductor , light-adjusting choke and other EMI/RFI circuit. We successfully perfected a
lot of high quality iron powder core series products in recent years, which had passed the certification of national
grade new product. Main technical properties are up to similar products in China and foreign countries.
Duarantees/Warranties/Terms and conditions
The quality of our products is metallic powder core,iron powder material,FeNi50 material,ALSiFe,Carbonyl-Fe,FeNiMo
Duarantees/Warranties/Terms and conditions
The quality of our products is guaranteed,Delivery guaranteed in 20 days after confirmation of
order,Payment terms are T/T or L/C at sight.
After Sales service
After sales services such as insurance,shipping ,customs,export documents,quality inspections,and maintenance are
offered through our customer service center in Xiamen,China.
Key contact person:
Susan chen
Service department
Tel:86 592 2217138 2225286
2219816
Fax:86 592 2207122 2207122
Copyright 2005 YUXIANG Magnetic Materials Ind. Co.,Ltd.All Rights Reserved.
Add:16F1,jinyuan building,NO.57,hubin S.Rd.,Xiamen,China.361004
Tel : (86)592 2225286 (86)592 2219816 (86)592 2217138 Fax: (86)592 2207122
Email : magnetcom@gmail.com sales@magnet-tech.com