a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
SPECIFICATION Property No. 070327
Page No.
1
BID LIST NO. 0755
SPECIFICATION
Property No. 070327
Solvent, Heat Set
General Requirements
Shall be a narrow cut petroleum distillate solvent boiling between 460 to 520
O
F (237.78 to 271.11
O
C) which
is free from any lower boiling volatile fractions and high boiling oily residues.
Chemically, the solvent shall be a 100% saturated hydrocarbon compound containing neither aromatics nor
orlefins.
Performance Tests:
Specific Gravity (ASTM D-12998):
. 8008
Refractive Index 20
O
C:

1.4437
Flash Point
O
F (ASTM D-93):
220
OF
(104
O
C)
Aniline Point
O
F (ASTM D-10121):
182.8
KB Number (ASTM-1133):
25.9
Color:
white
Odor:
No obnoxious odor, any odor to be minimal
Boiling range (ASTM D-86):
Initial Boiling Point
460
O
F (237.78
O
C)
Range 90% distilled
475-520
O
F (246.11-271.11
O
C)
This solvent is to be used in conventional heatset and room temperature set (no heat) web inks and shall
contain no contaminants or adulterants that are injurious to this end use of the solvent, viz corrosive or toxic
materials.
Packaging
Containers shall be 55-gallon nonreturnable drums with bung and vent in one head. The Contractor shall mark
each drum with the gross, tare, and net weights.
Sample Requirement
A one-quart sample of the product that the bidder proposes to furnish shall be supplied.
Qualified Products List
Magie Brothers Oil Company - "Magie Sol 47"
Witco Chemical Corporation - "Witsol 45" Page No.
2
SPECIFICATION
Property No. 118834
Solvent, Heatset, Odorless
General Requirements
This solvent is to be usable in heatset and non-heatset lithographic inks. It shall contain no a\contaminants or
adulterants that are injurious to this end use such as corrosive materials. Chemically the solvent shall be a
100% saturated hydrocarbon blend containing with negligible concentrations of aromatics or olefins.
Specific Requirements
Specific gravity @ 15
O
(ASTM D-1298)......................0.811
Refractive index @ 20
O
....................................1.448
Flash point, min (ASTM D-93)......................127
O
(260
O
F)
Aniline point (ASTM D-1012)........................89.5
O
(193
O
F)
KB Number (ASTM D-1133)....................................23.8
Color............................................... Water white
Odor..................................................,,odorless
Boiling range (ASTM D-86):
Initial boiling point........................264
O
(508