Schenectady Lab PO Box 724 2210 Technology Drive Schenectady, NY 12301 Tel: 518.382.0082 Fax: 518.382.1182 The M&P Lab
e-mail: info@the-mandp-lab.com www.the-mandp-lab.com Greenville Lab Suite L 481 Garlington Road Greenville, SC 29615 Tel: 864.297.4417 Fax: 864.297.4517 CURRENT SELECTED PHYSICAL TESTS OF PLASTICS AND METALS OFFERED by THE M&P LAB
Test Electrical Tests Arc resistance Capacitance Dielectric breakdown Dielectric breakdown Dielectric constant Dissipation factor Electric strength Electric strength Inductance Insulation resistance Resistance Surface resistivity Volume resistivity Mechanical Tests, Plastics Compression Deformation Density Flexural strength Hardness Shear strength Tensile strength and elongation ASTM D 695 ASTM D 621 ASTM D 792 ASTM D 790 ASTM D 785 ASTM D 2344 ASTM D 638 Yes Yes Yes Yes Yes Yes Yes n/a n/a n/a to 300 ºC n/a to 360 ºC to 360 ºC ASTM D 495 20 Hz to 1 MHz to 150 kV, 400 ma to 150 kV, 400 ma ASTM D 150, etc ASTM D 150, etc to 150 kV, 400 ma to 150 kV, 400 ma Various Various ASTM D 257 ASTM D 257 ASTM D 257 Yes Yes Air Oil Yes Yes Air Oil Yes Yes Yes Yes Yes n/a to 260 ºC to 260 ºC to 100 ºC to 260 ºC to 260 ºC to 260 ºC to 100 ºC to 260 ºC to 300 ºC to 300 ºC to 300 ºC to 300 ºC Method or Range Ambient Controlled Temperature Schenectady Lab PO Box 724 2210 Technology Drive Schenectady, NY 12301 Tel: 518.382.0082 Fax: 518.382.1182 The M&P Lab
e-mail: info@the-mandp-lab.com www.the-mandp-lab.com Greenville Lab Suite L 481 Garlington Road Greenville, SC 29615 Tel: 864.297.4417 Fax: 864.297.4517 Test Mechanical Tests, Metals Charpy impact Creep Density Fatigue Hardness, Brinell Hardness, Knoop Hardness, Rockwell Hardness, Vickers Rupture Tensile strength and elongation Tensile strength and elongation, foils Controlled Environment Tests Thermal aging, air Thermal, programmed temperature cycling Thermal stress Thermal stress Water absorption Method or Range Ambient Controlled Temperature n/a to 982 ºC n/a to 982 ºC n/a n/a n/a n/a to 982 ºC to 982 ºC to 300 ºC ASTM E 23 ASTM E 139 ASTM D 792 ASTM E 466 ASTM E 110 ASTM E 384 ASTM E 18 ASTM E 92 ASTM E 139 ASTM E 8, E 21 IPC TM 2.4.18 Yes n/a Yes n/a Yes Yes Yes Yes n/a Yes Yes UL 746B Air Fluidized sand Solder IPC TM 2.6.2.1A, etc n/a n/a n/a n/a n/a to 300 ºC 30 to 300 ºC to 600 ºC to 300 ºC n/a