Power Conditioning Units
/font>
Power Conditioning Units
Power Conditioning Units
Converts, controls and regulates the electrical
output from high speed alternators to deliver a
reliable source of high quality electrical power.
Bowman Power Limited
Ocean Quay, Belvidere Road, Southampton, SO14 5QY England
Telephone +44 (0)23 8023 6700 Fax +44 (0)23 8022 1128
For further information visit:
www.bowmanpower.com
Specifications
INPUT
OUTPUT
500-700 volt AC or DC
Voltage (line to line rms.) 400-480 volt, three phase, 4 wire, 50/60 Hz.
Typically 575 volt AC, 2-4 kHz
DC output to special order.
Other input supplies available
Voltage Regulation - better than 1% no load to full load.
to order
Frequency - Crystal Controlled selectable 45-65Hz.
Frequency Stability - better than 0.25%.
Voltage Total Harmonic Distortion (THD) up to 40th harmonic better than 3%.
Non linear load handling capability.
Current Total Demand Distortion (TDD) up to 40th harmonic better than 5%.
Neutral rated at full line current as standard.
Island or Utility Tie modes of operation are available.
About Bowman
Bowman Power
Limited is an industry
leader in the field of
Micro Turbine
Generators (MTGs).
Founded in 1994, the
company is dedicated
to the development of
high efficiency, low
emission on site
systems delivering
significant
environmental and
commercial benefits
for its customers.
The Bowman mission
statement is:
To be a leading
global supplier of
micro turbine based
cogeneration systems
and secure power
systems for on-site
generation.
Power Conditioning Unit for conditioning the
electrical output from various sources of distributed
power generation including permanent magnet
alternators, wind generators and fuel cells.
Highly efficient, with solid state reliability,
delivering a stable voltage/current/frequency
platform.
Programmable to meet end user
requirements with minimum Total Harmonic
Distortion (THD).
Flexible operation with Island or Utility tied
modes available.
100% unbalanced load.
Crest factor of 3
300% for 2 cycles
150% for 2 minutes (typical or to customer
requirement).
Power factor control.
Sizes from 50KVA (72A) to 500KVA (720A).
Specifications are subject to change without notice.
0501 Copyright © 2001 Bowman Power Limited. All rights reserved.