>
« back to results for ""
Below is a cache of http://www.designmaster.biz/Conference/2006/dmConference2006Registration.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
April 19-21, 2006 Cincinnati Airport Marriott
April 19-21, 2006
Cincinnati Airport Marriott

The Design Master User Conference is your chance to learn about how to use Design
Master to improve your productivity. Our staff will be there, teaching the classes and
leading the forums. You will meet other Design Master customers, giving you the
opportunity share ideas and learn how they are making the most of the software.

All classes will feature hands-on training using Design Master HVAC and Electrical.

You will also get the first look at our new HVAC Load Calculation upgrade!
--------------------------------------------------------------------------------------------
Registration Form

Attendee Name:
Email:
Company Name:
Address:
City/State/Zip:
Company Phone:

Conference plus Hotel Room for 2 nights:
$439 if paid on or before March 15
$539 after March 15

Conference Only:
$199 if paid on or before March 15
$249 after March 15

Method of Payment:
Check enclosed payable to Design Master Software
Charge to credit card __ MC __ VISA

Signature _______________________________________________________

Card number ____________________________________Exp. Date _________

Mail: Send completed form and payment to:
Design Master Software, 20300 19
th
Avenue NE, Shoreline, WA 98155
Fax:
Fax completed form and payment information to (206) 364-3363
Phone: (866) 516-9497 (to register or for general questions)
Email: rrobison@designmaster.biz
Classes
Classes will be held all day Thursday and Friday morning. All classes will feature
hands-on training using Design Master HVAC and Electrical. It is recommended
that you bring a laptop loaded with Design Master to the conference so that you
are able to follow along with the lesson.

Which classes do you plan to attend? (circle 5)


Electrical Classes
E1 - Customization: Blocks,
Layers, Text, Options

E2 - One Line Riser Diagrams:
Tying Them into the Rest of
Your Project

E3 - Low Voltage Devices: Setup
and Advantages

E4 - Design Master Link to Excel:
What does this do for me?

E5 - Master Schedules: Improving
Project Setup

HVAC Classes
M1 - Customization: Blocks,
Layers, Text, Options

M2 - Static Regain: Taming a Wild
Calculation

M3 - Heating and Cooling Load
Calculations: Getting the Most
out of Your Drawing

M4 - VAV System Design: Do It the
Design Master Way

M5 - 3D Ductwork: Improve Your
Presentation and Your Design


Forums
In addition to the classes, there will be three open forums during the conference.
The Thursday afternoon forums will focus on the development direction of Design
Master HVAC and Electrical. This is your chance to talk directly with us and
fellow customers about where you would like to see the software go next.
The Friday morning forum will focus on the integration of Design Master HVAC
and Electrical. In this forum, you will have a chance to share your thoughts and
ideas about how our two software programs could best share information.