dding=10 cellspacing=0 width=100%>Yahoo! is not affiliated with the authors of this page or responsible for its content.
ReFlex Power
Modular Programmable Precision
AC/DC/Loads Power System
ReFlex Power
Xantrex Technology Inc.
Headquarters
8999 Nelson Way
Burnaby, British Columbia
Canada V5A 4B5
800 670 0707 Toll Free
604 420 1591 Fax
Programmable Power Division
9250 Brown Deer Road
San Diego, CA 92121
800 733 5427 Toll Free
858 458 0267 Fax
www.xantrex.com
Smart Choice for power
Modular Programmable Precision AC/DC/Loads Power System
ReFlex Power is a high density, modular programmable power system providing DC, AC and electronic
load assets all under control of a single controller. It provides a reconfigurable, flexible platform ideal for ATE
and production test environments where ReFlex Power can provide programmable stimulus and bias power
as well as programmable loads for the device(s) under test.
The EIA 4U high ReFlex Power mainframe can hold up to 12 single-slot modules or combinations of single,
dual and triple-slot wide modules to configure (or reconfigure) the system for the particular requirements at
hand. The mainframe can support up to 6 kW of output power.
Up to 8 mainframes, potentially up to 95 modules, can be controlled via a single controller. The controller
communicates to the individual modules via a high speed proprietary bus protocol, providing very high
data rates and a high degree of deterministic control. The ReFlex Power controller communicates to the
host controller via an Ethernet LAN connection compliant with the LAN Extension for Instrumentation
(
) standard, assuring interoperability and ease of integration.
ReFlex Power system modules can be combined via the controller, permitting the creation of virtual
assets with the voltage/current combinations required for a particular test regime. Creating virtual
assets reduces the logistical tail and total cost of ownership.
Featuring AC, DC and Load Modules
Single slot, 330 Watt programmable DC supplies
� 16V, 20.6A
� 65V, 5.1A
Dual slot, 1kW programmable DC supplies
� 33V, 30A
� 450V, 2.3A
Triple slot, 875 VA, single phase, programmable
AC supply
� Dual range: 280V(rms), 3.5A(rms) or
140V(rms), 7A(rms)
Triple slot, 500V, programmable electronic DC
loads
� 15A, 375 Watt
� 30A, 750 Watt
� 2007 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International.
All specifications are subject to change Smart Choice for power
Applications
Rackmount ATE Systems
The high power density, large number of output channels and 16-bit
resolution, all under the control of a single Ethernet controller, makes ReFlex
Power ideal for ATE system integration. The wide variety of voltage and cur-
rent combinations and power density, created by up to 12 separately
programmable DC channels in a compact 4U package, makes ReFlex Power
the most compact ATE power package on the market. Combining this with
the ReFlex Power AC and load channels in the same chassis and under the
same controller, ReFlex Power can elegantly cover all of your ATE system
power stimulus requirements.
Product Development
Testing and burn-in of aircraft flight hardware, DC-DC converters, automotive
and semiconductor components are just a few of the items that are being
tested with ReFlex Power. From simple DC voltage set points and AC sine
waves to complex waveforms and triggers ReFlex Power keeps pace with
your product development power stimulus requirements.
Aerospace Testing
Testing of flight hardware and aircraft auxiliary systems requires precision
power stimulus hardware. ReFlex Power with its 3-phase AC capability at
frequencies from 45 to 5,000Hz and power to 2,625 VA with optional 1kW
of 33V or 450V DC all in one 4U solution is ideally designed to meet your
aerospace testing needs.
Process Control
Whether your are driving magnets for controlling ion beams for the
manufacture of semiconductors or operation of an linear accelerator or driving
a current through electrolyte for precise control of a plating process, ReFlex
Power is your ideal process control choice. ReFlex Power small footprint with
flexible configuration of multiple channels of DC, AC and load modules can
solve most companies process control requirements.
Research
A research environment presents some of the most demanding requirements
on your test instrumentation. ReFlex Powers flexible sequencing and
triggering supports your research needs. All too often, equipment that meets
the needs of your current project does not meet the needs of your next
project. ReFlex Power with its modular design protects your capital assets.
The Reflex Power architecture allows you to change to different DC voltage
and current combinations, add or subtract AC and load modules and parallel
and phase-lock modules. This allows Reflex Power to grow with your
stimulus power needs.
Key Features
Modular
Control up to 95 assets
Control multiple AC and DC power supplies and loads
in one mainframe
Sag/surge resistant
Simple series and parallel operation
Web browser control
User configurable
Highest Power Density
Simple integration
PFC 0.95
Universal AC/DC input
Up to 6kW in one mainframe
1kW DC modules
Reduced space and logistics hassles
High power density
Handles DC and AC power and load modules
User configurable
Universal AC/DC input
Ease of integration
Web browser control
Trigger bus
Combine modules to parallel or series operation
on the fly to create virtual assets
Precision 16-bit control
ReFlex Power Modular Programmable
Precision Power System
� 2007 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International.
All specifications are subject to change DC Modules Key Features
Near Linear Power Supply
Modular
0.95 PFC
Digital control loop technology
High Power Density (3.5 watts/cubic inch)
Virtual Assets by:

Series operation

Parallel operation

Combined operation with loads
Simple integration
DC Modules General Specifications
Line Regulation
+/- 10% line change
Steady State, Voltage
Mode
0.01% of full-scale + 10mV (330W) and 0.03% of
full-scale (1kW)
Steady State, Current
Mode
0.05% of fullscale (330W) and 0.1% of full-scale
(1kW)
Transient, Voltage
Mode
Less than 1% of full-scale excursion returning to
steady state within 500 micro-sec
Transient, Current
Mode
Less than 0.05% of full-scale (330W) and less than
0.1% (1kW)
Remote Sense
Up to 3V load line drop. The drop in the load leads
subtracts from the maximum voltage available for the
load.
Parallel
Up to six like modules.
Series
Up to five like modules. Float not to exceed 200V
(16V, 33V), 300V (65V). 450V (450V).
Sag/Surge/Hold Up
Sag to 65% of nominal for 450ms at full output power
with AC input at 200VAC. Surge to 135% of nominal
for 450ms at full output with AC input 230VAC.
10ms hold up at loss of input.
Remote programming
connector
9-pin D-sub
Output connector
Combination signal/power contact subminiature D
(Mating connector or cable kits available)
Output Voltage
0-16V
0-65V
0-33V
0-450V
Output Current
0-20.6A
0-5.1A
0-30A
0-2.3A
Maximum Power
330W
330W
1000W
1000W
Mainframe Slots
1
1
2
2
Ripple / Noise
RMS
5mV
6mV
15mV
40mV
Peak-Peak
20mA+0.1%
5.1mA+0.1%
30mA+0.2%
2.3mA+0.2%
Programming Accuracy
Voltage 0.05%+
8mV
32.5mV
16.5mV
225mV
Current
20mA
5.1mA
30mA
2.3mA
Temperature Coefficient
Voltage /C
1.6mV
6.5mV
3.3mV
45mV
Current /C
5mA
1mA
7.5mA
0.6mA
Output rise/fall
time
20msec
20msec
20msec
20msec
The DC power supplies of the ReFlex Power system include models rated at
330W and 1kW. They are part of a modular family of power assets that
integrate into the ReFlex Power Mainframe to provide a wide range of
features, functionality, and extensive configurability and adaptability. The
modules can be set up to operate as standalone assets, or in combinations
of parallel, series, and series/parallel groups to extend voltage, current, and
power ratings.
The ReFlex Power system of DC power supplies brings modularity to DC
power assets, and makes possible a high degree of reconfigurability and
adaptability through a Mainframe-based architecture. It extends the modular
configuration to high power DC assets, without compromising performance
or the controls feature set. The mechanical design is ruggedized for harsh
environments, including mobile applications, as well as general-purpose
industrial and laboratory rack-mount ATE.
ReFlex Power DC Modules
Smart Choice for power
� 2007 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International.
All specifications are subject to change Smart Choice for power
The ReFlex Power system includes an AC power supply rated at 875VA
with two output voltage ranges, 0-140VAC and 0-280VAC. This AC source is
part of a modular family of power assets that integrate into the ReFlex Power
Mainframe to provide a wide range of features, functionality, and extensive
configurability and adaptability. The AC module can be set up to operate as
a standalone asset, in combinations of parallel, and in multi-phase groups to
extend voltage, current, and power ratings.
The module utilizes high-frequency power conversion for