t> « back to results for ""
Below is a cache of http://www.smartpartsproducts.com/collections/20100/36306.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
USER MANUAL www.smartpartsproducts.com
Page
1




USER MANUAL


Digital Picture Frame
SP-DPF84



www.smartpartsproducts.com
Page
2




Table of Contents


Overview .................................................................................................... 4
Features ..................................................................................................... 5
Getting Started ...........................................................................................5
a. Unpacking your Digital Picture Frame

5
b. Removing the protective plastic film

5
c. Attaching the Fold Out stand


6
d. Connecting the frame to the Power Supply
6
e. Connecting the frame to a computer

6
Changing and Adding Pictures .....7
a. View contents on your memory card

7
b. Formatting pictures from your computer

8
c. Using Smartparts website for HELP

8
Product Diagram .9
Viewing Pictures ....11

a. Turning the frame on



12

b. Selecting the mode



12
The Photo Folder ...12

a. Viewing a picture




12

b. Rotating a picture




12

c. Slideshow mode




12

d. Delete a picture




13






www.smartpartsproducts.com
Page
3
The Music Folder ......13

a. Playing Music




13

b. Play / Pause Music



14

c. Volume





14
Set Up Menu ....14

a. Photo Options




15

b. Music Mode




16

c. Systems Mode




16
Warranty and Technical Support ...16
























www.smartpartsproducts.com
Page
4



Overview

The SP-DPF84 Digital Picture Frame lets you view your
digital pictures and listen to your MP 3 music from
memory cards.
You can enjoy or edit your photos any time and
anywhere.
The frame is an ideal way to display your digital
photographs
The
Slide Show mode is a convenient method to display
all your picture in a continuous mode it offers you many
pre programmed transitions from slide to slide
Most functions of your digital picture frame can be
controlled from the enclosed Remote Control
The Digital Picture Frame doesnt require a direct
connection to a computer the build-in card reader can
read memory cards
It supports most popular types of memory cards and file
formats
The digital picture frame is a digital photo album that
lets you display hundreds of pictures anywhere in your
home or office
It can be connected to a computer and pictures can be
up-loaded (from computer to memory card) or
downloaded (from memory card to computer)
Music in the MP3 format can be played on the Digital
Picture Frame
The frame should not be On for more than 10
hours at a time








www.smartpartsproducts.com
Page
5





Features

The SP-DPF84 supports JPEG and MP3 music files
The resolution of the screen is 800 x 600
Compatible with: Compact Flash (CF), Secure Digital (SD).
Memory Stick (MS) and Xtreme Digital (xD) memory cards
USB 2.0 connection compatible with Windows XP and
Windows 2000
The frame allows user to delete, rotate and/or pan pictures,
play Music (MP3 format), create slide shows and move
pictures between the memory cards and a computer




Getting Started

The following chapter provides step-by-step instructions on setting
up your Digital Picture Frame for the first time.


a. Unpacking your Digital Picture Frame
The box should include:
-
SP-DPF 84 digital picture frame
-
User
Manual
-
Remote
Control
-
USB
cable
-
AC
Power
Adapter







b. Removing the protective plastic film from the LCD panel
The digital picture frame ships with a protective plastic film on www.smartpartsproducts.com
Page
6
its LCD panel to protect it from being scratched during the
manufacturing and shipping process.
We suggest you remove the film to improve the quality /
clarity of the picture. Please be advised however that the LCD
screen scratch easily and the film will protect it.


c. Connecting the frame to the Power Supply
Use only the supplied AC power supply. Make sure that the
frames power switch is in the OFF position before you
connect or disconnect the power supply.
Plug the AC power supply only into a 120 VAC 60 Hz (regular
North American) wall outlets connecting the frame to a
different power source or wall outlet will harm the unit and
void the warranty.

d. Connecting the frame to your computer (optional)
Use the supplied USB cable and connect the frame to your
computer.
The Hardware wizard will show that you connected a new
device and will recognize it as a disk drive.
No software needs to be installed. Just follow the start menu
and click on My Computer your memory card will be listed
under Devices with Removable Storage. You can open it by
double clicking on the icon representing your memory card.
Most likely this device will be named after the manufacturer of
your memory card.
There will be no data available as long as you do not insert a
memory card into your frame.
Once you insert a memory you will see the respective drive
on your computer and you will be able to access your pictures
and the frame can act as a regular card reader.
Please note that the Digital Picture Frame will not display
pictures while it is connected to a computer. Please
disconnect the USB cable to view pictures.







www.smartpartsproducts.com
Page
7

Changing & adding pictures on your memory card

The following chapter provides step-by-step instructions on how to
add and format pictures from your computer onto your memory
card for viewing in your Digital Picture Frame.

TECHNICAL ALERT:
The pictures have to be stored in the correct folder on your
memory for the Digital Picture Frame to display the pictures!
The pictures have to be stored in the right file format with the
correct file naming!


a. View Contents on your memory card
After you connect your frame to your computer you can see
your memory card under My Computer as an external drive.
By clicking on the symbol you will get access to the DCIM
folder. All pictures are stores in this folder and all NEW
pictures HAVE to be stored in this folder as well.








b. Formatting the Pictures from your computer
The preferred file format for the Digital Picture Frame is
JPEG. However, there are different variations of the JPEG
format and not all formats can be read by the Digital Picture
Frame or your Digital Camera.

We recommend using standard Microsoft picture editing
software to save your pictures in JPEG format. Even
PHOTOSHOP or PHOTOSHOP ELEMENTS files should be
opened in a standard Microsoft Picture Editor and saved as a
JPEG file to the memory card.

We also recommend naming the pictures without using
underscores or more then 4 number digits in the name. www.smartpartsproducts.com
Page
8


c. Using Smartparts Website for HELP
We provide a useful tool on our website to help you:
- Save your pictures in the proper and
readable format
- Name your pictures so the Digital Picture
Frame can find and read it
- Save it in the proper resolution so you can
maximize the space on your memory card
and speed up the functions in your Digital
Picture Frame
Please log on to
www.smartpartsproducts.com
and click on
My Photos.

Please register under your name your access will be
immediate.
Now you can browse for the pictures on your computer and
upload and preview them in the frame illustrated on our
website.
Once the file is uploaded you can just copy drag and drop or
by right clicking on the picture and saving it into the DCIM
file on your memory card.