anged. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
IG630 IG630 IG630 IG630 High Performance In-grade Luminaire Asymmetrical
High Performance In-grade Luminaire Asymmetrical
High Performance In-grade Luminaire Asymmetrical
High Performance In-grade Luminaire Asymmetrical
Applications:
Applications:
Applications:
Applications:
Stainless Steel recessed in-grade asymmetrical
luminaire. Designed to conform with the architectural requirements
for the illumination of up-lighting trees, flagpoles, walls, signage,
columns and similar outdoor applications.
Housing:
Housing:
Housing:
Housing:



Inner housing is constructed of high grade die cast
aluminum allow. Outer mounting sleeve is made from high strength
ABS plastic. Anodized aluminum, asymmetrical reflector with a
hammered, honeycomb textured finish. The fixture is not rated for
The fixture is not rated for
The fixture is not rated for
The fixture is not rated for
submersion. Proper drainage must be provided.
submersion. Proper drainage must be provided.
submersion. Proper drainage must be provided.
submersion. Proper drainage must be provided.
Faceplate:
Faceplate:
Faceplate:
Faceplate:
Constructed of high grade spun stainless steel. Faceplate
is installed by eight (8) tamper resistant, stainless steel screws and
threaded into the housing casting. Clear tempered glass diffuser
sealed to the housing with a high temperature silicone rubber
gasket. Fixture is capable to withstand a maximum load of 3,300 lbs
not exceeding 30MPH when installed on a proper foundation.
Electrical:
Electrical:
Electrical:
Electrical:
Lampholder: Porcelain G12, RX7 or R7 base with nickel
plated contacts and high temperature leads, rated 660W.
Incandescent rated 600V, H.I.D. pulse rated 4kV. Mini candela base
has high temperature leads rated 75W-150V.
Ballast: Magnetic are class P HPF available in 120V or 277V and will
start the lamp down to -30°C.
Finish:
Finish:
Finish:
Finish:
Brushed stainless steel finish. Custom colors available on
special order
Listing:
Listing:
Listing:
Listing:
UL or ETL
UL or ETL
UL or ETL
UL or ETL listed and suitable for wet locations.
Note:
Note:
Note:
Note:
The distance between the luminaire and the illuminated surface
of the object must be at least 2 ½ feet. Fixture has a IP67
IP67
IP67
IP67 rating.
Specifications Subject to change without notice
IG630
IG630
IG630
IG630
5461 West Jefferson Blvd
Los Angeles, CA 90016
Tel: 1-888-4-LUMEN8
Fax: 1-888-7-LUMEN8
Project :
Type :
Product # : IG630/
Date :
Approval :
www.Lumenton.com
Page 1 of 2 5461 West Jefferson Blvd
Los Angeles, CA 90016
Tel: 1-888-4-LUMEN8
Fax: 1-888-7-LUMEN8
Project :
Type :
Product # : IG630/
Date :
Approval :
www.Lumenton.com
5/24/2005
ITEM #: IG630
ITEM #: IG630
ITEM #: IG630
ITEM #: IG630
ORDERING :
ORDERING :
ORDERING :
ORDERING :
IG630
IG630
IG630
IG630
/
/
//
/
/
//
Lamp
Lamp
Lamp
Lamp
/
/
//
Volt
Volt
Volt
Volt
Finish
Finish
Finish
Finish
Lamp Description
Lamp Description
Lamp Description
Lamp Description
Lumen
Lumen
Lumen
Lumen
Base
Base
Base
Base
Bulb
Bulb
Bulb
Bulb
Watt
Watt
Watt
Watt
Line Voltage
Line Voltage
Line Voltage
Line Voltage
MCQ400 (Mini-Cand-Quartz)
8250
E11
T4
400W
MC
MC
MC
MC
R7S
10000
R7S
R7S
R7S
R7S
R7S
High Intensity Discharge - 120V/277V
High Intensity Discharge - 120V/277V
High Intensity Discharge - 120V/277V
High Intensity Discharge - 120V/277V
HPSRX150 (Lucalox High Pr. Sod.
14500
RX7S
T7
150W
HPSRX15
HPSRX15
HPSRX15
HPSRX15
HPSRX250 (Lucalox High Pr. Sod.
27000
RX7S
T7
250W
HPSRX25
HPSRX25
HPSRX25
HPSRX25
70W (Ceramic Metal Halide)
6200
G12
T6
70W
MHC70
MHC70
MHC70
MHC70
150W (Ceramic Metal Halide)
13500
G12
T6
150W
MHC150
MHC150
MHC150
MHC150
HQIMFH250 (Double-Ended Contact)
20000
FC2
T9.5
250W
MHF250
MHF250
MHF250
MHF250
CMHR70 (Double-Ended Contact)
7000
RX7S
T6
70W
MHR70
MHR70
MHR70
MHR70
MHR150 (Double-Ended Contact)
13500
RX7S
T7
150W
MHR150
MHR150
MHR150
MHR150
120
120
120
120
277
277
277
277
Page 2 of 2