TYPE="text/css">
AT&T INDIANA GUIDEBOOK


PART 15 - Dedicated Communications Services
SECTION 2 - Channel Services
1st Revised Sheet 1
Cancels Original Sheet 1


CHANNELS


Series 1000 - Metallic and Telegraph

General

Series 1000 services include channels for low-speed data transmission, supervisory control, remote
metering and miscellaneous signaling purposes at rates up to 150 baud. These channels are not
suitable for the transmission of alternating current tones.

Channels are furnished for intra-exchange or inter-exchange service on a two-point or multipoint basis
as indicated below.

Series 1000 channels (including channels created from them by the customer) are not permitted to be
connected with facilities furnished for exchange service or toll service.

Station equipment may be provided by the customer subject to the provisions in General preceding.

Allowance for Interruptions

No credit is allowed for interruptions to service of less than 30 minutes. Interruptions of 30 minutes or
over are credited to the customer at the proportionate monthly charge in half hour multiples for each half
hour or major fraction thereof of interruption.

Description

Type 1011 is a two-wire interface with two-wire facilities suitable for signaling at speeds not to exceed
30 baud; furnished for remote metering, supervisory control and miscellaneous signaling purposes.
Available for intra-exchange two-point or three point service and inter-exchange two or three point
service to a contiguous Exchange.

Type 1012 is a two-wire interface with two-wire facilities suitable for low speed signaling not to exceed
30 baud; furnished for remote metering, supervisory control and miscellaneous signaling purposes.
Available for intra-exchange, for inter-exchange two or three-point service to non-contiguous Exchanges
or four point or more inter-exchange service to all other Exchanges.
















ATT TN IN-07-17442
Effective: October 1, 2007
AT&T INDIANA GUIDEBOOK


PART 15 - Dedicated Communications Services
SECTION 2 - Channel Services
1st Revised Sheet 2
Cancels Original Sheet 2


CHANNELS (cont'd)


Series 1000 - Metallic and Telegraph (cont'd)

Description (contd)

Applicable to Types 1011, 1012 (30 baud channels)

Service is furnished subject to the availability of facilities and construction of facilities expressly for this
purpose is not contemplated.

It is expressly declared that metallic inter-office and inter-exchange facilities for these services are in
decreasing supply and the Company is not obligated to continue to make such metallic facilities
available.

Multipoint service for Type 1012 service is limited to a maximum of 26 points served from a total of no
more than three different serving central offices and may be further limited by the transmission distance
limitations of customer provided terminal equipment.

Additional terminations furnished in the same building or on the same continuous property are not
subject to the limits specified in the paragraph preceding.

These channels permit undirectional transmission of contact closure or voltage or current transitions at
speeds up to 15 bits per second. The maximum direct current voltage shall not exceed 270 volts
conductor to conductor or 135 volts from either conductor to ground. Alternating current voltages shall
be limited to a value of 62.5 MA (70.7 volts peak) conductor to conductor or either conductor to ground,
and the shortest signaling element shall not be less than 33MS (.033 seconds). The direct and
alternating current voltage sources shall limit the maximum current, conductor to conductor or either
conductor to ground, to a value not to exceed 50 MA (.05 ampere) for Type 1011 channels and 20 MA
(.02 ampere) for Type 1012 channels.





















ATT TN IN-07-17442
Effective: October 1, 2007
AT&T INDIANA GUIDEBOOK


PART 15 - Dedicated Communications Services
SECTION 2 - Channel Services
2nd Revised Sheet 3
Cancels 1st Revised Sheet 3


CHANNELS (contd)


Series 1000 - Metallic and Telegraph (contd)


Nonrecurring
Charge



Description /Billing Code/

Initial

Additional
Monthly
Price


A. Intra-exchange

1.
Local Distribution Channel, each

Type 1011 /2UC/
Type 1012 /2UC/

2.
Inter-office Channel Mileage,
per mile or fraction

All Types /1L31S/1LY8S/1L1NS/1L68S/

3.
Inter-office Channel Mileage Termination, each

All Types /24E/

4.
Building Channel Termination, each

Type 1011 /267++/2UA/
Type 1012 /267++/2UA/

5.
Continuous Property Channel, in addition to 4.
above

When the distance between buildings is 10,000
feet or less

All Types, each /1L311/1LY81/
/1L1N1/1L681/

When the distance between buildings is greater
than 10,000 feet

All Types, each /1L312/1LY82/1L1N2/1L682/





$ 89.00
/1/

93.00
/1/





-



-



150.00
/1/

150.00
/1/









-




-





$40.00
/1/

44.00
/1/





-



-



44.00
/1/

44.00
/1/









-




-





$55.00 (I)
55.00 (I)




9.35



4.50



5.50
5.50








10.50




31.35







/1/
Premises Work Charges as specified in Part 3 apply.


ATT TN IN-07-17584
Effective: November 1, 2007
AT&T INDIANA GUIDEBOOK


PART 15 - Dedicated Communications Services
SECTION 2 - Channel Services
2nd Revised Sheet 4
Cancels 1st Revised Sheet 4


CHANNELS (contd)


Series 1000 - Metallic and Telegraph (contd)


Nonrecurring
Charge



Description /Billing Code/

Initial

Additional
Monthly
Price


B. Inter-exchange

1.
Inter-exchange Channel Mileage, per airline mile
or fraction

Types 1011 and 1012 /1L314/
0 to 25
26 miles and over

2.
Inter-exchange Channel Mileage
Termination, each (based on Inter-exchange
Channel length)

Type 1011
0 to 25 /01N/
26 miles and over /03N/
Type 1012
O to 25 / 01n
26 miles and over /03N/

3.
Local Distribution Channel, each

Type 1011 /2UC/
Type 1012 /2UC/

4.
Inter-office Channel Mileage, per mile or fraction

All Types
/1L31P/1L68P/1LY8P/1L1NP/

5.
Inter-office Channel Mileage Termination, each

All Types /24E/







-
-






-
-

-
-



$235.00
/1/

295.00
/1/





-



-







-
-






-
-

-
-



$170.00
/1/

225.00
/1/





-



-







$10.45
8.70






7.00
7.00

7.00
7.00



55.00 (I)
55.00 (I)




9.35



4.50







/1/
Premises Work Charges as specified in Part 3 apply.


ATT TN IN-07-17584
Effective: November 1, 2007

AT&T INDIANA GUIDEBOOK


PART 15 - Dedicated Communications Services
SECTION 2 - Channel Services
1st Revised Sheet 5
Cancels Original Sheet 5


CHANNELS (contd)


Series 1000 - Metallic and Telegraph (contd)


Nonrecurring
Charge



Description /Billing Code/

Initial

Additional
Monthly
Price


B. Inter-exchange
(cont'd)

6. Building Channel Termination, each

Type 1011 /2UA/
Type 1012 /2UA/

7. Continuous Property Channel, in addition 6.
above

When the distance between the buildings is
10,000 feet or less

Types 1011 and 1012
/1L311/1L1N1/1L681/1LY81/

When the distance between the buildings is
greater than 10,000 feet

Types 1011 and 1012
/1L312/1L1N2/1L682/1LY82/

C. Move
Charge

Types 1011 and 1012

D. Retermination
Charge





$150.00
/1/

150.00
/1/









-





-



59.00
/1/


59.00
/1/






$44.00
/1/

44.00
/1/









-





-



/1/


/1/






$5.50
5.50








10.50





31.35



-

-














/1/
Premises Work Charges as specified in Part 3 apply.


ATT TN IN-07-17442
Effective: October 1, 2007
AT&T INDIANA GUIDEBOOK


PART 15 - Dedicated Communications Services
SECTION 2 - Channel Services
1st Revised Sheet 6
Cancels Original Sheet 6


CHANNELS (cont'd)


Series 2000 - Direct Analog

General

Series 2000 services include channels for voice transmission of approximate bandwidth of 300-3000 Hz.

Channels are furnished for intra-exchange or inter-exchange service on a two-point or multipoint basis
as indicated below. The number of stations that may be connected and the distance over which
sati