olor=blue>
VpCI VpCI -368
PRODUCT DESCRIPTION
VpCI-
368 is a time-proven coating that provides excellent
protection to metal substrates exposed to harsh outdoor
conditions.
VpCI-
368 leaves a firm, wax-like film that can
be removed by mineral spirits or alkaline cleaners such as
Cortec
®

VpCI-
414.
FEATURES
Flexible
Excellent salt spray protection
Excellent outdoor protection
Multimetal protection
Excellent UV resistance
Moisture displacing
Cured film is heat stable up to 392ºF (200ºC)
Conforms to MIL-PRF-16173E (Grades 1 and 2)
NATO 6850-66-132-5848
NATO 6850-66-132-6099
NSN 8030-00-062-6950
NSN 8030-00-231-2345
NSN 8030-00-244-1300
NSN 8030-01-470-2601
TYPICAL APPLICATIONS
Pipe coating
Parts storage
Underbody coating
Wire rope
Steel plate
Machined parts
METALS PROTECTED
Carbon Steel
Stainless Steel
Copper
Aluminum
Cast Iron
PROTECTION PROPERTIES

ASTM
DFT
Carbon Steel (1010)
Salt Spray B-117
2-3 mils
900-1500 hr.

(50-75
microns)
APPLICATION
VpCI-
368 may be applied by brushing or spraying. A
film thickness of at least 2-3 mils (50-70 microns) is
recommended for uncovered outdoor storage.
Surface Preparation:

NACE SSPC ARS

3 or 4
6 or 7
High B-2
Product Cleanup:

Use solvents or mineral spirits for cleanup of equipment.

Solvent, wax strippers, or alkaline cleaners such as
VpCI-
414 can be used for clean up of overspray.
TYPICAL PROPERTIES
Appearance
Dark brown viscous liquid
Coverage 300-330
ft
2
/gal @ 3 mils
(7-8
m
2
/l @ 75 microns)
Dry Film Time
12-24 hours
Drying to Touch Time 0.5-3 hours
Film Type
Firm, wax-like
Removal Method
Petroleum solvents
Carrier Mineral
spirits
Shelf Life
24 months @ 75ºF (24ºC)
Non-volatile Content
57-61%
Viscosity at 23ºC
600-5,000 cps (6 rpm)
Spindle
#2
VOC
2.9-3.1 lb/gal (347-372 g/l)
Density
7.4-7.6 lb/gal (0.89-0.91 kg/l)
Note: Coating dry time is affected by temperature, air-flow and
humidity.
PACKAGING AND STORAGE
VpCI-
368 is available in 5 gallon (19 liter) steel pails, 55
gallon (208 liter) metal drums, totes, bulk and 11 oz. (312 g)
aerosol cans. RECOMMENDED SPRAY EQUIPMENT
This information is based on spraying VpCI-368 at 3
parts concentrate to 1 part mineral spirits. A ready-to-use
version of VpCI-368 is also available. The viscosity range
is between 100-1,000 cps. If using a dilution other than
this, please consult a Cortec or Graco representative.
Model 510
Airless/AA
Plus
Pump 30:1
President
Tip
0.011-0.015 in (0.028-0.038 cm)
Cap Standard
Filter
60 Mesh High Pressure
Air Pressure
80 psi
Fluid Hose
3/8 x 10 with ¼ whip hose for
ease of handling
Fluid Pressure
2000/1700 psi (138/117 bar)
(Supply/Gun)
The minimum fluid atomization pressure required is 1500
psi (103 bar), which gives 2-4 mils (50-100 microns)
WFT/pass.
All statements, technical information and recommendations contained herein are based on tests Cortec Corporation
believes to be reliable, but the accuracy or completeness thereof is not guaranteed.
Cortec Corporation warrants Cortec
®
products will be free from defects when shipped to customer. Cortec
Corporations obligation under this warranty shall be limited to replacement of product that proves to be defective.
To obtain replacement product under this warranty, the customer must notify Cortec Corporation of the claimed
defect within six months after shipment of product to customer. All freight charges for replacement products shall
be paid by customer.
Cortec Corporation shall have no liability for any injury, loss or damage arising out of the use of or the inability
to use the products.
BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS INTENDED
USE, AND USER ASSUMES ALL RISK AND LIABILITY WHATSOEVER IN CONNECTION THEREWITH. No
representation or recommendation not contained herein shall have any force or effect unless in a written document
signed by an officer of Cortec Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED
OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO CASE SHALL CORTEC CORPORATION BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
LIMITED WARRANTY
FOR INDUSTRIAL USE ONLY
KEEP OUT OF REACH OF CHILDREN
KEEP CONTAINER TIGHTLY CLOSED
NOT FOR INTERNAL CONSUMPTION
CONSULT MATERIAL SAFETY DATA SHEET FOR MORE
INFORMATION
Distributed by:
4119 White Bear Parkway, St. Paul, MN 55110 USA
Phone (651) 429-1100, Fax (651) 429-1122
Toll Free (800) 4-CORTEC, E-mail info@cortecvci.com
Internet http://www.cortecvci.com
printed on recycled paper
10% post consumer
Revised 5/2/06. Cortec Corporation 1999-2006. All rights reserved. Supersedes: 4/4/03.
© 1999-2006, Cortec Corporation. All Rights Reserved. Copying of these materials in any form
without the written authorization of Cortec Corporation is strictly prohibited.