OPX5200 Cabinet Outside Plant Exchange Specifically Designed for
Zhone's MALC 319 and MALC 723 Chassis Heavy duty aluminum
construction Corrosion, weather, fire,
and vandal resistant protection Certified to meet
Telcordia GR-487 Issue 2 requirements Enhanced Cooling System
-- High level of heat dissipation to support dense electronic systems and high traffic rate applications
The OPX5200 Outside Plant Exchange Cabinet Family was specifically designed to provide outdoor housing solutions for the Zhone family of broadband loop carriers. This family of cabinets features a patented Enhanced Cooling System with superior heat dissipation that can accommodate higher line density and traffic rate applications as well as significantly improving battery life. Designed specifically for the outside plant environment, the OPX5200 cabinet family optimizes equipment density, heat transfer and dissipation, power reserve, environmental protection and ease of installation and maintenance. Utilizing the side chambers for passive equipment the cabinets maximize valuable electronic space. The OPX5200 family can accommodate from 200 lines up to 1600 lines, depending on the type of access equipment selected and installed. All models, except the OPX5200E, can be pole or pad mounted. The OPX5200B can also be mounted on an existing host pad as an adjunct installation, utilizing an overhang plate. The Enhanced Cooling System enables a reduced cost-per-line solution and the capability for higher traffic rates and denser electronic equipment by greatly reducing battery temperatures without the use of air conditioners. Sealed Design -Protection from outdoor elements such as humidity, dust and rain Electrostatically-Applied,
Baked on Polyester Paint Finish OPX5200 Cabinet Ordering Information
MODEL DESCRIPTION OPX5200 BASIC CABINET MODELS
OPX-5200-K-200P-1M319-AC OPX-5200-K-400P-1M319-AC OPX-5200-B-200P-1M723-AC OPX-5200-B-400P-1M723-AC OPX-5200-E-800P-2M723-AC OPX-5200-E-1200P-2M723-AC OPX5200K PREWIRED 200 PORTS W/ 1 M319 CHASSIS W/ 1 MTAC CARD W/ AC/DC RECTIFIER OPX5200K PREWIRED 400 PORTS W/ 1 M319 CHASSIS W/ 1 MTAC CARD W/ AC/DC RECTIFIER OPX5200B PREWIRED 200 PORTS W/ 1 M723 CHASSIS W/ 1 MTAC CARD W/ AC/DC RECTIFIER OPX5200B PREWIRED 400 PORTS W/ 1 M723 CHASSIS W/ 1 MTAC CARD W/ AC/DC RECTIFIER OPX5200E PREWIRED 800 PORTS W/ 2 M723 CHASSIS W/ 1 MTAC CARD W/ AC/DC RECTIFIER OPX5200E PREWIRED 1200 PORTS W/ 2 M723 CHASSIS W/ 1 MTAC CARD W/ AC/DC RECTIFIER OPX5200 ACCESSORIES
OPX-5200-100P-PROTECTOR-BLOCK OPX-5200-10-5PIN-PROTECTOR OPX-5200-100P-BLOCK-HOLDER OPX-5200-GENERATOR-INLET OPX-5200-20A-RECTIFIER OPX-5200-30A-RECTIFIER OPX-5200-K-POLE-MOUNT-KIT OPX-5200-K-PAD-MOUNT-KIT OPX-5200-B-POLE-MOUNT-KIT OPX-5200-B-PAD-MOUNT-KIT OPX-5200-E-PAD-MOUNT-KIT OPX-5200-K-BATTERY-HEATER OPX-5200-B-BATTERY-HEATER OPX-5200-E-BATTERY-HEATER OPX-5200-BATTERY-STRING-125AH OPX-5200-DS1-HDSL4-1U-3SLOTS OPX-5200-DS1-HDSL4-3U-28SLOTS OPX-5200-DS1-HDSL4-CO-2PAIR-LN OPX-5200-DS1-HDSL4-RT-2PAIR-LN OPX-5200-DS1-HDSL4-RPT-2SLOTS OPX-5200-DS1-HDSL4-2PAIR-RPT OPX-5200-CUSTOM-CARD-CONFIG UPGRADE KIT W/ 100-PAIR PROTECTOR BLOCK FOR OPX5200 CABINETS UPGRADE KIT W/ 10 5-PIN PROTECTOR UNITS FOR OPX5200 CABINETS UPGRADE KIT W/ 100-PAIR PROTECTOR BLOCK HOLDER W/ 2 POSITIONS FOR OPX5200 CABINETS UPGRADE KIT W/ GENERATOR INLET FOR OPX5200 CABINETS UPGRADE KIT W/ 20A RECTIFIER FOR OPX5200 CABINETS UPGRADE KIT W/ 30A RECTIFIER FOR OPX5200 CABINETS POLE MOUNTING KIT FOR OPX5200K CABINETS PAD MOUNTING KIT FOR OPX5200K CABINETS POLE MOUNTING KIT FOR OPX5200B CABINETS PAD MOUNTING KIT FOR OPX5200B CABINETS PAD MOUNTING KIT FOR OPX5200E CABINETS BATTERY HEATER PAD FOR OPX5200K CABINETS BATTERY HEATER PAD FOR OPX5200B CABINETS BATTERY HEATER PAD FOR OPX5200E CABINETS BATTERY STRING W/ 125 AMP HOUR FOR OPX5200 CABINETS UPGRADE KIT W/ DS1-HDSL4 3190 MEC 1RU SHELF W/ 3 SLOTS FOR OPX5200 CABINETS UPGRADE KIT W/ DS1-HDSL4 3190 MEC 3RU SHELF W/ 28 SLOTS FOR OPX5200 CABINETS UPGRADE KIT W/ DS1-HDSL4 3190 MEC 2-PAIR CO LINE UNIT FOR OPX5200 CABINETS UPGRADE KIT W/ DS1-HDSL4 3190 MEC 2-PAIR RT LINE UNIT FOR OPX5200 CABINETS UPGRADE KIT W/ DS1-HDSL4 239 MEC ENCLOSURE W/ 2 SLOTS FOR OPX5200 CABINETS UPGRADE KIT W/ DS1-HDSL4 239 MEC 2-PAIR REPEATER UNIT FOR OPX5200 CABINETS OPX5200 CUSTOM CONFIGURATION W/ CARD TO SLOT MAPPING AND CABLING OPX5200 Cabinet
Technical Specifications
Dimensions
s Interfaces
s s Regulatory Compliance
s s s s s OPX5200E: 43.5 in. (W) x 41.1 in. (D) x 63 in. (H) - Up to 50 RU of internal space available OPX5200B: 43.5 in. (W) x 20.8 in. (D) x 63 in. (H) - Up to 25 RU of internal space available OPX5200K: 36 in. (W) x 24 in. (D) x 48 in. (H) Up to 16 RU of internal space available s Weight
s s s s OPX5200E: 900 lbs. OPX5200B: 450 lbs. OPX5200K: 375 lbs. s s s s s s Power
s s s s s s s s s AC/DC Load Center Input Voltage: 120/240 Vac Serive Entrance: 100 Amp DC Rectifiers: 2x30 Amp (OPX5200E and OPX5200B) and 2x20 Amp (OPX5200K) Fuses: 10 15A fuses for additional equipment AC Generator Inlet: Optional Battery Backup Battery String: 1 string with 125 Ah (up to 8 hours backup time depending on MALC configuration) Battery Warmer: Optional Protection Blocks: OPX5200E: 1600 pairs (3M MS^2 connector for splicing / Telco 50-pin connector for equipments) OPX5200B: 800 pairs (3M MS^2 connector for splicing / Telco 50-pin connector for equipments) OPX5200K: 400 pairs (3M MS^2 connector for splicing / Telco 50-pin connector for equipments) Mounting Options: OPX5200E: pad only OPX5200B: pad, pole, wall, h-frame OPX5200K: pad, pole, wall, h-frame Uplink Options: T1, E1, Multiport T1/E1, DS3/E3, OC3/STM1, GigE Fiber, 10/100/1000BT GR-487 GR-063 ACPP UL Operating Requirements
s s s s s s s Operating Temperature: -40C to 65C Storage Temperature: -40C to 80C Relative Humidity: 5% to 95% Heat Exchangers: OPX5200E: Up to 3400 watts OPX5200B: Up to 1700 watts OPX5200K: Up to 700 watts 2007/01/05 14:55:09