Snap feet for quick fixing into
base plates of up to 1.0 mm. With its terminals for L1, L2,
L3, N and SL this block connector type has especially
been designed for through-connection and for the tap to
the luminaire.
These terminal blocks are provided with each 2 clamping
units with clamping spring contacts on the ingoing and
the outgoing side for screwless connection of solid wires
of 0.5 -2.5 mm
2
. Additionally, there is 1 clamping unit
(0.5 mm
2
) per pole for internal wiring of an interference
capacitor.
Wires can be released by pressing down the clamping
spring with a screwdriver (blade size 0.5 x 3.0).
Protection against unintended touch of live parts to
VBG 4 and VDE 0106 and VDE 0470. It complies with
VDE 0711.
Marking
These terminal blocks can be supplied either unprinted or
printed with L1, L2, L3, N, .
Technical Data
Mouldings:
Polyamide 6/6, white
Tracking resistance PTI 600
Continuous working temp.: 100° C
Short-time temperature: 160° C
Inserts:
Brass, tinned
Current Rating:
to EN 60 598 : 16 A
to EN 60 998 : 24 A
Clamping Springs: Stainless spring steel
Conductor Size: 0.5 to 2.5 mm
2
Stripping Length: 8 - 9 mm
BLOCK CONNECTORS
TYPE 935
Approvals
Nominal Cross-Section mm
2
2,5
2,5
2,5
2,5
2,5
2,5
2,5
14-20 AWG 14-20 AWG
2,5
16 amp.
15 amp.
Voltage Rating V
400
400
400
400
400
400
400
300
600*
400
* with more than 5 A = 300 V
935, unprinted
10 80 05
1,68
500
935 B, printed
10 80 15
1,68
500
List No.
Order
Kgs. per
Packing
No.
100 Pcs.
Unit
935 Examples for marking
Further markings upon request.
Hole Pattern
25
32
13,6
+0,2
5,6
+0,2
4,5
±0,1
4,5
±0,1
21,1
+0,1
21
17
5
7
3
25,5
14,5
11