oo! is not affiliated with the authors of this page or responsible for its content.
0149 (Generic) 3/04 Marine Starting, Deep Cycle Trolling and Dual Purpose Batteries
Our complete line of marine starting, trolling and dual purpose batteries deliver the highest per-
formance and reliability. Available in flooded, gel and AGM, these batteries provide maximum
power for fast, sure starts and hours of trouble-free deep cycle trolling and/or accessory power
COMPARE THESE FEATURES AND BENEFITS:
and all batteries are made in the U.S.A. your assurance of quality.
BATTERY TYPES
SVR Gel Batteries
Sealed, Valve-Regulated (SVR) Gelled-electrolyte batter-
ies offer many significant advantages over conventional
flooded batteries. Gel batteries are spillproof* and
leakproof, and resist over-discharges that can shorten the
life of the battery.�
Gel batteries have a self-discharge rate of less than 1%
per month (at 68�F). They provide ample cranking amper-
age for quick, sure starts, and deliver longer trolling time
than comparable flooded models. Their SVR design mini-
mizes gassing, making them safe to install around people
and sensitive electronic equipment. Gel batteries offer a
viable alternative when you can only choose one battery.
Gel batteries are maintenance-free.
� Charging: For longest life, always use a good, constant
potential, voltage-regulated charger. For 12-volt Gel
batteries, charge to at least 13.8 volts, but no more
than 14.1 volts at 68�F (20�C). Do not charge in a
sealed container.
SVR AGM Batteries
Sealed, Valve-Regulated (SVR) Absorbed Glass Mat
(AGM) batteries use special absorbed electrolyte technol-
ogy that is superior to flooded lead-acid batteries.
Fine, highly porous microfiber glass separators absorb
the electrolyte*, increasing efficiency by lowering internal
resistance and boosting capacity.
Lower internal resistance also means that the batteries
can be recharged faster than conventional batteries,
allowing the user to put them back into operation sooner.
The completely sealed, valve-regulated AGM battery
eliminates gas emissions and acid leakage for longer and
safer battery operation. AGM batteries are also completely
maintenance-free.
Charging: Use a good, constant potential, voltage-regu-
lated charger. For 12-volt AGM batteries, charge to at
least 14.4 volts, but no more than 14.6 volts at 68�F
(20�C). Do not charge in a sealed container.
Flooded Batteries
Flooded lead-acid batteries are the most widely used
batteries both in automotive and marine applications.
Lead-acid batteries are usually less expensive than
either the Gel or AGM batteries, but do not provide the
same cycle life and convenience.
Most flooded batteries require maintenance. Electrolyte
levels must be maintained above the cells plates.
* Rated non-spillable by International Commercial Airline
Association (ICAO), International Airline Transport
Association (IATA) and DOT definitions.
FLOODED DUAL PURPOSE BATTERIES
Full-frame grids . . . . . . . . . Wont short circuit,
and plates
. . . . . . . . . . . . .
for long life
Deep-pocket envelope . . . . Help prevent
plate separators
. . . . . . . . .
internal shorts
Exclusive high density . . . . Delivers more
plate paste
. . . . . . . . . . . . .
power-per-pound
Exclusive demineralized . . . Reduces water loss,
electrolyte
. . . . . . . . . . . . .
for long life
Power path . . . . . . . . . . . . Directs more energy
grid design
. . . . . . . . . . . . .
to terminal posts
Molded-in stainless . . . . . . Keep battery top
steel dual top terminals
. . .
corrosion-free.
with wing nuts
. . . . . . . . . .
250 quality . . . . . . . . . . . . Assures best
control checks
. . . . . . . . . .
performance, longest life
FLOODED DEEP CYCLE TROLLING BATTERIES
Combination terminals . . . . For easy installation
. . . . . . . . . . . . . . . . . . . . .
and hook-up
Special oxide on . . . . . . . . For maximum
computer-cured plates
. . . .
performance
Dual-insulated glass . . . . . Resist shorts and
mat separators
. . . . . . . . . .
prevent shedding
Computer-cast, . . . . . . . . . For longer life
heavy-duty grids
. . . . . . . . .
Chambered pod vents . . . . . Reduce electrolyte
. . . . . . . . . . . . . . . . . . . . .
spillage
Convenient . . . . . . . . . . . . For easy transport
carrying handles
. . . . . . . . .
Greater reserve capacity . . . More time on the water,
. . . . . . . . . . . . . . . . . . . . .
more accessory power
Maintenance-free . . . . . . . . Eliminates the need to
construction
. . . . . . . . . . . .
add water
Spillproof, valve- . . . . . . . . Eliminates acid leaks
regulated design
. . . . . . . . .
and terminal corrosion
Lower electrical . . . . . . . . . Provides higher discharge
resistance
. . . . . . . . . . . . .
rates, quick starts
Resists vibration . . . . . . . . Provides longer
damage
. . . . . . . . . . . . . . .
operation over time
Faster charging rates . . . . . Faster turnaround times
Glass mat separators . . . . . Spillproof and leakproof
. . . . . . . . . . . . . . . . . . . . .
properties
Safety relief valve . . . . . . . . Safer operation and
system
. . . . . . . . . . . . . . . .
safer charging
Combination terminals . . . . For easy hook-up
Handles . . . . . . . . . . . . . . . For easy installation
GEL STARTING/DEEP CYCLE BATTERIES
100% maintenance-free . . . No need to check
. . . . . . . . . . . . . . . . . . . . .
fluid levels
Ideal for both starting . . . . . Great multipurpose
and trolling
. . . . . . . . . . . . .
battery
Faster recharge than . . . . . For quicker
flooded designs
. . . . . . . . .
turnaround time
Heavy-duty grids and . . . . . Provide maximum
high density oxide
. . . . . . .
durability, power and life
Spillproof construction . . . Eliminates dangerous
. . . . . . . . . . . . . . . . . . . . .
gassing
�
and leaks
Self-discharge rate less . . . Recharges to full power,
than 1% per month
. . . . . .
even if left discharged
(@ 68�F)
. . . . . . . . . . . . . .
for weeks
Broad line of sizes . . . . . . . For all marine power needs
ABSORBED GLASS MAT DUAL PURPOSE BATTERIES
FLOODED STARTING BATTERIES
Up to 1000 crank- . . . . . . . For highest performance
ing amps @ 32F
Maintenance-free . . . . . . . . For hassle free starting
construction
. . . . . . . . . . . .
and reliability
Combination . . . . . . . . . . . . For easy installation
terminals
. . . . . . . . . . . . . .
and hook-up
Flame-retardant, . . . . . . . . Keep battery dry
chambered vents
. . . . . . . .
and corrosion-free
Envelope separators . . . . . . For longer life
Flush covers . . . . . . . . . . . . Easier to keep clean
Broad coverage . . . . . . . . . For a wide variety of
. . . . . . . . . . . . . . . . . . . . .
applications
Power path . . . . . . . . . . . . Directs more energy
grid design
. . . . . . . . . . . . .
to terminal posts Which Should I Choose?
(continued)
For light to moderate-duty low amp draw service, choose the
dual purpose battery, specially designed to handle both starting
and cycling.
For heavy-duty cycling, choose the deep cycle battery.
This will give you enough cranking amperage to start your
engine, and the most reserve power to keep your trolling motor
and accessories running longer. Use the following convenient
chart to help you select a battery type appropriate for your
specific situation.
Always be sure that the replacement battery CA and
CCA meet minimum engine starting requirements.
STARTING
TROLLING
Moderate
None
Moderate
Moderate
Moderate
Heavy
Heavy
None
Heavy
Moderate Heavy
Heavy
*
*
*
Which is
Right for
Your Marine
Application?
STARTING
vs.
DEEP CYCLE
vs.
DUAL PURPOSE
BATTERIES
Replacement should meet/exceed O.E. required CCAs
# Sealed, Valve-Regulated
* Use in combination. Consult dealer for more information.
BATTERY SAFETY
Proposition 65 Warning: Batteries, battery posts, terminals, and
related accessories contain lead and lead compounds, chemicals
known to the state of California to cause cancer and reproductive
harm. Wash hands after handling. Always wear safety glasses
when working on or near batteries. BE CAREFUL! Batteries
produce explosive gases. Keep sparks, flames and cigarettes
away from batteries at all times.
Lead-acid batteries are virtually 100% recyclable!
Be sure to return your used lead-acid battery to a
retailer. In most states it is illegal to discard a
battery in the trash.
RETURN
LEAD
RECYCLE
Pb
BATTERY APPLICATIONS
Marine Starting Service
When a battery is called upon to deliver several hun-
dred amps of power to the starting motor, the battery
must be able to deliver this power quickly...within a few
seconds. This power comes off of the surface of the
plates inside the battery. Therefore, a battery with more
plate surface area and less resistance will deliver power
quicker than one with less plate surface and high resist-
ance.
Thats why starting batteries are made with thinner
plates...because you only use the power off the surface
of the plates for starting the engine.
Deep Cycle Service
A deep cycle battery is called upon to deliver a long,
slow discharge of fewer amps...for several minutes or
hours...in a deep cycle application, such as running a
trolling motor or heavy marine accessory load (e.g.
depth finders, fish finders, radios, radar, lights, coolers,
house power, etc.).
In this case, the power comes from deep within the
plates, not merely off the surface as in starting.
Therefore, deep cycle batteries are specially engineered
with heavier, thicker plates with fiberglass reinforcement,