he front cover and tighten the two side screws.
Connect the individual components according to the diagrams.
Testing the remote siren/strobe
Call
1-888-835-5668
to put your account on test.
The tattletale does not need to be armed to test the siren/strobe.
Press the * and # buttons at the same time to sound an instant
alarm. (If your account is not on test when you do this, the police
will be dispatched).
Enter your 4 digit arming code to turn off the siren.
The remote siren/strobe should activate when the siren and
strobe on the tattletale activates. If this does not happen, examine
the connection between the plug and the jack on the back of the
tattletale.
Troubleshooting
If the siren & strobe begins to sound when the tattletale is not
armed or during a non-alarm, the battery in the transmitter may
need to be replaced.
Open the transmitter connected to the tattletale siren & strobe
port and replace the battery with a 3.0 Volt Lithium Ion Type 123
cylindrical battery available at any photo store.
Call 1-888-835-5668 for assistance.
General information
Project the alarm anywhere you need it. The Wireless Siren/Strobe is
constructed of strong, rust free die-cast aluminum and is intended to
be mounted outside. It is activated when the tattletales siren and
strobe goes off.
A/C Power
Wireless receiver
Siren/Strobe
Wireless transmitter
A/C Power
tattletale Alarm Unit
www.tattletalealarm.com 1.888.TELL.ON.U
tattletale