(others see cover sheet)
Installation Instructions No. 01 29 0 139 734 Issue date: 10.2001

Parts and Accessories
Installation Instructions

Alarm system retrot kit

MINI (R50/R53) LHD and RHD

Technical and electrical knowledge required
Installation time approx. 3 -4 hours, which can vary according to the condition of the car and
the equipment in it.
Retrofit kit
65 75 0 029 310 (LHD)
65 75 0 139 732 (RHD)
050 0042 B
EN/2

Retrofit kit 65 75 0 029 310 (others see cover sheet)
Installation Instructions No. 01 29 0 139 734 Issue date: 10.2001

Contents

Section
Page

1.
Important information for the installation of the alarm system . . . . . . . . . . . . . . . . .
3
2.
Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
3.
Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
4.
LHD connection diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
5.
RHD connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
6.
Installation and cabling diagram (LHD cars) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
7.
Installation and cabling diagram (RHD cars) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
8.
To install the ultrasonic sensor in the headlining in cars with a sunroof . . . . . . . . . 10
9.
To install the ultrasonic sensor in the headlining in cars without a sunroof . . . . . . . 11
10. To install the alarm system connection cable (LHD cars) . . . . . . . . . . . . . . . . . . . . 13
11. Coding and concluding work. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
12. Function test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
13. Circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
EN/3

Retrofit kit 65 75 0 029 310 (others see cover sheet)
Installation Instructions No. 01 29 0 139 734 Issue date: 10.2001

1.
Important information for the installation of the alarm system

Only for use in the MINI dealer organisation.
The alarm system wiring harness may only be installed by a specialist workshop that has the
required special tools and manuals (servicing, repair, diagnostics, etc.).
Ensure that the cables/lines are not kinked or damaged as you install them in the car.Additional
cables/lines that you install must be secured with cable ties/textile adhesive tape.
Item numbers refer only to the overview drawings and to the texts next to the appropriate figure.
The alarm system connection cable A is only required for LHD cars, the alarm system
connection cable B is only required for RHD cars.

Subject to technical modifications
Required tools and equipment

Set of Allen keys
Set of flat screwdrivers
Set of Torx sockets
Cable lamp
1/4 inch socket set
Angle cutter
Set of 1/2 inch socket wrenches
Carpet knife
Cable lamp
EN/4

Retrofit kit 65 75 0 029 310 (others see cover sheet)
Installation Instructions No. 01 29 0 139 734 Issue date: 10.2001

2.
Preparations

0

TIS instruction No.

Print out error memory

---

Disconnect the battery
12 00 ...
Remove the rear seat bench

---

Remove the rear seat backrest

---

Remove the side trim at the rear left

---

Remove the door sill strips on both sides

---

Remove the C pillar covers on both sides

---

Remove the B pillar trims on both sides

---

Remove the SHD frame at the front and rear

---

Remove the handles at the rear left and right

---

Remove the ceiling light at the rear

---

Release the rear headlining

---

Remove the cover on the instrument panel

---

Remove oddments box on the drivers side

---

Remove the tachograph

---

Remove the steering column trims at the top and bottom

---

Remove the wiper switch

---

Release the fuse holder

---
EN/5

Retrofit kit 65 75 0 029 310 (others see cover sheet)
Installation Instructions No. 01 29 0 139 734 Issue date: 10.2001

3.
Parts list

0

Legend

A
Alarm system connection cable (LHD cars)
B
Alarm system connection cable (RHD cars)
1
Wiper switch
2
Tilt alarm sensor
3
Emergency-current siren
4
Emergency-current siren holder
5
Ultrasonic module
6
Ultrasonic interior guard trim (must be ordered separately)
7
Bottom ultrasonic module holder
8
Top ultrasonic module holder
9
Hexagonal screw M6x16 (2x)
10 Hexagonal screw with washer M6x12
11 Cable tie (20x)
12 Black 4-pin plug for the alarm system siren (required for the alarm system siren)
13 Hexagonal nut M6 (2x)
14 5 A fuse
15 Template (supplied with the parts kit)
050 0043 B
A
2
1
3
4
6
7
8
9
10
B
11
12
13
5
14
15
EN/6

Retrofit kit 65 75 0 029 310 (others see cover sheet)
Installation Instructions No. 01 29 0 139 734 Issue date: 10.2001

4.
LHD connection diagram

0
0

Item
Description
Signal
Cable colour
/ Cross-
section
Connection location in the car
Abbreviation /
Slot

A
Alarm system connection
cable (LHD cars)
---
---
---
---
A1
Blade terminal contact
Terminal 31L
BR
To alarm system siren
X19562, PIN1
A2
Blade terminal contact
STDWA
SW/RT/GE
To alarm system siren
X19562, PIN2
A3
Blade terminal contact
Terminal 30
RT/SW/GE
To alarm system siren
X19562, PIN3
A4
Blade terminal contact
Siren
SW/BL/WS
To alarm system siren
X19562, PIN4
A5
Blade terminal contact
DWAL
GR/SW/GE
To wiper switch socket casing
X10692, PIN9
A6
Blade terminal contact
Terminal 30
RT/SW/GE
Fuse holder input XVII
X110207, PIN11
A7
Cable eyelet
Terminal 31L
BR
To earth post left
X1108
A8
Cable eyelet
Terminal 31E
BR/SW
To E earth post left
X13230
A9
Black 4-pin socket casing
---
---
To radio interior guard
X1582
A10
Black 6-pin socket casing
---
---
To DWA tilt sensor at the rear left
X1222
A11
Blade terminal contact
DWAL
GR/SW/GE
Base module on socket casing D
X255, PIN14
A12
Blade terminal contact
Siren
SW/BL/WS
Base module on socket casing B
X253, PIN11
A13
Blade terminal contact
Terminal 30
SW/GE
Base module on socket casing B
X253, PIN15
A14
Blade terminal contact
DWA12V
RT/SW
Base module on socket casing B
X253, PIN16
A15
Blade terminal contact
STDWA
SW/RT/GE
Base module on socket casing B
X253, PIN27
A16
Blade terminal contact
NG
SW/BL
Base module on socket casing B
X253, PIN30
A17
Blade terminal contact
DWA12V
SW/RT
Base module on socket casing B
X253, PIN34
050 0044 B
A
A10
A9
A7
A5
A6
A11
A1-A4
A12-A17
A8
EN/7

Retrofit kit 65 75 0 029 310 (others see cover sheet)
Installation Instructions No. 01 29 0 139 734 Issue date: 10.2001

5.
RHD connection diagram

0
0

Item
Description
Signal
Cable colour /
Cross-section
Connection location in the car
Abbreviation /
Slot

B
Alarm system connection
cable (LHD cars)
---
---
---
---
B1
Blade terminal contact
Terminal 31L
BR
To alarm system siren
X19562, PIN1
B2
Blade terminal contact
STDWA
SW/RT/GE
To alarm system siren
X19562, PIN2
B3
Blade terminal contact
Terminal 30
RT/SW/GE
To alarm system siren
X19562, PIN3
B4
Blade terminal contact
Siren
SW/BL/WS
To alarm system siren
X19562, PIN4
B5
Blade terminal contact
DWAL
GR/SW/GE
To base module socket casing D
X255, PIN14
B6
Blade terminal contact
Terminal 30
RT/SW/GE
Fuse holder input XVII
X110207, PIN11
B7
Cable eyelet
Terminal 31L
BR
To earth post left
X1108
B8
Cable eyelet
Terminal 31E
BR/SW
To E earth post left
X13230
B9
Black 4-pin socket casing
---
---
To radio interior guard
X1582
B10
Black 6-pin socket casing
---
---
To DWA tilt sensor at the rear left
X1222
B11
Blade terminal contact
DWAL
GR/SW/GE
To wiper switch plug
X10692, PIN9
B12
Blade terminal contact
Siren
SW/BL/WS
To base module socket casing B
X253, PIN11
B13
Blade terminal contact
Terminal 30
SW/GE
To base module socket casing B
X253, PIN15
B14
Blade terminal contact
DWA12V
RT/SW
To base module socket casing B
X253, PIN16
B15
Blade terminal contact
STDWA
SW/RT/GE
To base module socket casing B
X253, PIN27
B16
Blade terminal contact
NG
SW/BL
To base module socket casing B
X253, PIN30
B17
Blade terminal contact
DWA12V
SW/RT
To base module socket casing B
X253, PIN34
050 0045 B
B
B10
B9
B7
B11
B6
B5
B1-B4
B12-B17
B8
EN/8

Retrofit kit 65 75 0 029 310 (others see cover sheet)
Installation Instructions No. 01 29 0 139 734 Issue date: 10.2001

6.
Installation and cabling diagram (LHD cars)

0)

All the wiring harnesses are to be laid along the main wiring harness as shown in the
figure and secured with cable ties.
Alarm system wiring harness


Branches

A1-A4

to alarm system siren
Branch

A5

to wiper switch socket casing X10692
Branch

A6

to fuse holder plug X10207
Branch

A7

to left earth post X1108
Branch

A8

to left E earth post X13230
Branch

A9

to radio interior guard
Branch

A10

to the tilt sensor at the rear left
Branch

A11

to base module D socket casing X255
Branches

A12-A17

to base module B socket casing X253
Point

X

cable passage at the rubber grommet on the drivers side branches

A1-A4
Tie back any excess lengths.
050 0046 B
A1-A4
A11
A12-A17
A5
A9
A6
A7
A8
A10
X
EN/9

Retrofit kit 65 75 0 029 310 (others see cover sheet)
Installation Instructions No. 01 29 0 139 734 Issue date: 10.2001

7.
Installation and cabling diagram (RHD cars)

0)

All the wiring harnesses are to be laid along the main wiring harness as shown in the
figure and secured with cable ties.
Alarm system wiring harnes