JIB CRANES
Abell-Howe Floor Mounted Jib Crane
Specifications Features Model J-900 Model J-906FTC Conco Electrified Articulated Jib Crane
Standard Duty Heavy Duty Light Duty 11
11
Phone (412) 429-1212 / 800-445-9456 www.amickassociates.com Fax (412) 429-0191 11-1 JIB CRANES
Abell-Howe Floor Mounted Jib Crane Amick Associates, Inc.
version #2�04 Abell-Howe Floor Mounted Jib Crane
Specifications
MAST: Fabricated from heavy wall structural steel pipe with wall thickness sized to minimize deflection. BASE PLATE: Large diameter base plate is reinforced with heavy steel gussets for continuous alignment and rigidity. HEAD SECTION: Rigid steel plate box type with welded construction for minimum deflection between boom and mast. s Bottom roller assembly can be shimmed for boom leveling. BOOM: Rolled steel I-beam section with long wearing tapered flange for smooth trolley travel. s End stops at both ends of the boom are provided to limit trolley travel. Features
s s s s s The J-904 boom features full 360� rotation on a tapered roller bearing providing full capacity vertical and radial thrust loading. The lower section of the head revolves around the pillar on a pair of steel rollers equipped with self-aligning roller bearings. Available in hand push, hand geared rotation, air or electric motor drives. J-904 Pillar Jib Cranes are available as standard in capacities from 500 to 20,000 lbs., spans to 30 feet and under boom height from 8 to 30 ft. Larger capacity and special configurations are available upon request. 11
Model J-904F Foundation Pillar Jib Crane Features 360� rotation. Mast is mounted in concrete foundation. Removable sleeve is also available. Light-Duty Model J-904S Foundation-Mount Pillar Jib Crane 1/2 Ton Maximum Capacity *Warning � To avoid injury:
� � � � Do not exceed working load limit, load rating, or capacity. Do not use to lift people or loads over people. Use only alloy chain for overhead lifting. Read and follow all instructions. * WARNING Overloading and improper use can result in injury. See above. Phone (412) 429-1212 / 800-445-9456 www.amickassociates.com Fax (412) 429-0191 11-2 Amick Associates, Inc.
version #2�04 JIB CRANES
Abell-Howe Floor Mounted Jib Crane Table 11-1. Sample of J-904 Sizes and Capacities
Capacity (tons) Span A Boom Height B 10'0" 10'0" 10'0" 10'0" 10'0" 10'0" 10'0" 10'0" 10'0" 10'0" 10'0" 10'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" 12'0" Overall Height C 10'6" 10'7" 10'8" 10'10" 10'10" 11'0" 10'8" 10'10" 11'0" 11'0" 11'3" 11'3" 13'0" 13'0" 13'3" 13'6" 13'6" 13'6" 13'3" 13'3" 13'6" 13'6" 13'8" 14'0" 13'6" 13'6" 13'8" 14'0" 14'0" 14'0" Model Number J904 120-06B 120-07B 120-08B 120-10B 120-10B 140-12B 120-08B 120-10B 140-12B 140-12B 140-15B 140-15B 140-12B 160-12B 160-15B 160-18B 180-18B 180-18B 160-15B 180-15B 180-18B 200-18B 200-20B 240-24B 200-18B 240-18B 240-20B 240-24B 300-24HB 300-24HB Mast Boom Size Diameter D (in.) 12-3/4 12-3/4 12-3/4 12-3/4 12-3/4 14 12-3/4 12-3/4 14 14 14 14 14 16 16 16 18 18 16 18 18 20 20 24 20 24 24 24 30 30 6"/12.5# 7"/15.3# 8"/18.4# 10"/25.4# 10"/25.4# 12"/31.8# 8"/18.4# 10"/25.4# 12"/31.8# 12"/31.8# 15"/42.9# 15"/42.9# 12"/31.8# 12"/31.8# 15"/42.9# 18"/54.7# 18"/54.7# 18"/54.7# 15"/42.9# 15"/42.9# 18"/54.7# 18"/54.7# 20"/65.4# 24"/79.9# 18"/54.7# 18"/54.7# 20"/65.4# 24"/79.9# 24"/105.9# 24"/105.9# Base Plate Diameter G 3'0" 3'0" 3'0" 3'0" 3'0" 3'6" 3'0" 3'0" 3'6" 3'6" 3'6" 3'6" 3'6" 4'0" 4'0" 4'0" 4'6" 4'6" 4'0" 4'6" 4'6" 5'0" 5'0" 5'6" 5'0" 5'6" 5'6" 5'6" 6'0" 6'0" Base Plate Diameter F 1'3" 1'3" 1'3" 1'3" 1'3" 1'5" 1'3" 1'3" 1'5" 1'5" 1'5" 1'5" 1'5" 14-3/8" 14-3/8" 1'4-3/8" 1'5-3/8" 1'5-3/8" 1'4-3/8" 1'5-3/8" 1'5-3/8" 1'8-3/8" 1'4-3/8" 1'11-1/8" 1'8-3/8" 1'11-1/8" 1'11-1/8" 1'11-1/8" 2'2" 2'2" Approx. Net Weight (lbs.) 1,040 1,265 1,350 1,515 1,565 2,055 1,280 1,415 1,855 1,920 2,205 2,290 1,825 2,440 2,690 2,990 3,455 3,585 2,515 2,955 3,235 3,900 4,240 5,320 3,570 4,230 4,520 4,960 7,180 7,390 1/2 10'0" 12'0" 14'0" 16'0" 18'0" 20'0" 10'0" 12'0" 14'0" 16'0" 18'0" 20'0" 10'0" 12'0" 14'0" 16'0" 18'0" 20'0" 10'0" 12'0" 14'0" 16'0" 18'0" 20'0" 10'0" 12'0" 14'0" 16'0" 18'0" 20'0" 1 Model J-900
Thru 5 ton Standard capacity 200� maximum rotation. 2 3 5 Specifications
Fabricated, steel wall bracket fittings with bearings. s Threaded tie rods provide take-up for boom leveling.
s Note: Kits are available to convert to wall mount. Available in Motorized Versions -- Consult Factory
s Model J-906FCT
Thru 5 ton capacity, 20' spans standard for high hook lift application. Abell-Howe Wall Bracket Jib Crane Fitting Make your own J-900 Jib Crane using the same quality hinge fitting used on all Abell-Howe J-900 Jibs. Kit includes Upper Tie Rod Hinges; Lower Boom Hinge; and Boom End Tie Rod Connector. For capacities of 1 to 5 tons. Complete instructions included. You provide I-beam, tie rods and assembly. s Abell-Howe Full Cantilever Jib Crane Fitting Make your own J906FCT Jib Crane up to 2 ton capacity. 11 Specifications
s Conservably designed mast resists torsional forces from off-center loading. s Fabricated steel hinge fittings with bearings. s Boom is preset to compensate for deflection under load.
Larger capacity and special configurations available. *Warning � To avoid injury:
� � � � Do not exceed working load limit, load rating, or capacity. Do not use to lift people or loads over people. Use only alloy chain for overhead lifting. Read and follow all instructions. * WARNING Overloading and improper use can result in injury. See above. Phone (412) 429-1212 / 800-445-9456 www.amickassociates.com Fax (412) 429-0191 11-3 JIB CRANES
Conco Electrified Articulated Jib Crane Amick Associates, Inc.
version #2�04 Conco Electrified Articulated Jib Crane
Offers operators the lateral maneuverability of an articulated jib arm with the added flexibility provided by a prewired electric supply. This new jib arm features:
s s s s s s s s Two 360� pivot arms that can reach and operate in confined areas where standard jib cranes cannot. Ease of movement and accurate positioning assured with heavy roller bearings in both arms. Unique electrification includes installed conductor wire and electric plugs which allow operator to easily add electric hoists such as the Lodestar hoist (hoist not included). Versatile as a floor or overhead mounted unit. More options for efficient, ergonomic operation in tight spaces or where headroom limitations rule out use of conventional straight armed jibs. Capacities to one ton and work envelopes to 32 feet in diameter. One-year warranty. Made in U.S.A. � � � � Do not exceed working load limit, load rating, or capacity. Do not use to lift people or loads over people. Use only alloy chain for overhead lifting. Read and follow all instructions. *Warning � To avoid injury: 11 * WARNING Overloading and improper use can result in injury. See above. Phone (412) 429-1212 / 800-445-9456 www.amickassociates.com Fax (412) 429-0191 11-4 Amick Associates, Inc.
version #2�04 JIB CRANES Table 11-2. Standard Duty Electrified Articulated Jib Crane Specifications
Model Number EAJ1250-8P EAJ1110-9P EAJ1000-10P EAJ910-11P EAJ835-12P EAJ770-13P EAJ715-14P EAJ665-15P Capacity (lbs.) 1,250 1,110 1,000 910 835 770 715 665 Reach (ft.) 8 9 10 11 12 13 14 15 A (in.) 56 63 70 77 84 91 98 105 B (in.) 40 45 50 55 60 65 70 75 C (in.) 6-1/4 6-1/4 6-1/4 6-1/4 6-1/4 6-1/4 6-1/4 6-1/4 D (in.) 124-1/2 124-1/2 124-1/2 124-1/2 124-1/2 124-1/2 124-1/2 124-1/2 E (in.) 98 98 98 98 98 98 98 98 F (in.) 31-5/8 31-5/8 31-5/8 31-5/8 31-5/8 31-5/8 31-5/8 31-5/8 Note: To convert to ceiling mount, change suffix on model to C.
Include hoist weight to determine capacity. Table 11-3. Heavy Duty Electrified Articulated Jib Crane Specifications
Model Number EAJ2000-8P EAJ1785-9P EAJ1600-10P EAJ1460-11P EAJ1340-12P EAJ1256-13P EAJ1150-14P EAJ1071-15P EAJ1000-16P Capacity (lbs.) 2,000 1,785 1,600 1,460 1,340 1,256 1,150 1,071 1,000 Reach (ft.) 8 9 10 11 12 13 14 15 16 A (in.) 56 63 70 77 84 91 98 105 112 B (in.) 40 45 50 55 60 65 70 75 80 C (in.) 11-3/4 11-3/4 11-3/4 11-3/4 11-3/4 11-3/4 11-3/4 11-3/4 11-3/4 D (in.) 134-1/2 134-1/2 134-1/2 134-1/2 134-1/2 134-1/2 134-1/2 134-1/2 134-1/2 E (in.) 98 98 98 98 98 98 98 98 98 F (in.) 44-1/2 44-1/2 44-1/2 44-1/2 44-1/2 44-1/2 44-1/2 44-1/2 44-1/2 Note: To convert to ceiling mount, change suffix on model to C.
Include hoist weight to determine capacity. Table 11-4. Light Duty Electrified Articulated Jib Crane Specifications
Model Number EAJ310-8P EAJ280-9P EAJ250-10P EAJ230-11P EAJ210-12P EAJ190-13P EAJ180-14P EAJ170-15P Capacity (lbs.) 310 280 250 230 210 190 180 170 Reach (ft.) 8 9 10 11 12 13 14 15 A (in.) 56 63 70 77 84 91 98 105 B (in.) 40 45 50 55 60 65 70 75 C (in.) 3-7/8 3-7/8 3-7/8 3-7/8 3-7/8 3-7/8 3-7/8 3-7/8 D (in.) 106-1/4 106-1/4 106-1/4 106-1/4 106-1/4 106-1/4 106-1/4 106-1/4 E (in.) 90 90 90 90 90 90 90 90 F (in.) 18-1/8 18-1/8 18-1/8 18-1/8 18-1/8 18-1/8 18-1/8 18-1/8 Note: To convert to ceiling mount, change suffix on model to C.
Include hoist weight to determine capacity. *Warning � To avoid injury:
� Do not exceed working load limit, load rating, or capacity. � Do not use to lift people or loads over people. � Use only alloy chain for overhead lifting. � Read and follow all instructions. 11 * WARNING Overloading and improper use can result in injury. See above. Phone (412) 429-1212 / 800-445-9456 www.amickassociates.com Fax (412) 429-0191 11-5 JIB CRANES
This Page Intentionally Left Blank Amick Associates, Inc.
version #2�04 11 Phone (412) 429-1212 / 800-445-9456 www.amickassociates.com Fax (412) 429-0191 11-6