lspan=2>
Product Data Sheet EverGuard Product Data Sheet 15
29
Product Data Sheet
EverGuard
®
PVC
Accessories
Product
Description
Benefit/Application
Quantity/Size
Weight
Prefabricated
Expansion
Joint Covers
.060" thick
reinforced
membrane with
foam supported
bellows
Two standard sizes to accommodate
most common joint widths
50' continuous length minimizes
joints
Universal style suitable for both field
and wall expansion joints
Factory-fabricated terminations and
transitions available
Small
4" bellows for 1-2" joints
50' continuous roll
Large
6" bellows for 2-3" joints
50' continuous roll
Small:
60 lbs/roll
Large:
75 lbs/roll
Walkway
Rolls
1/8" thick (125 mil)
extruded and
embossed PVC
Herringbone traction surfacing in
gray color
Available in both pads and rolls
Heat welds directly to membrane
Pads
30" x 36"; 30 pads/carton
Rolls
30" x 50'
8 lbs/pad
or
118 lbs/roll
Preformed Pipe
Boot
Molded PVC un-
reinforced membrane
Three standard sizes to accommodate
most common pipes and conduit
6 Boots/Carton
1"-4"
3"-7"
7"-12"
(White Only)
4 lbs/carton
4.5 lbs/carton
5 lbs/carton
Preformed
Inside Corner
Molded PVC un-
reinforced membrane
For use in flashing inside corners of
base and curb flashings
2-3/4" x 3.5" with 6' flange
20 corners/carton
1.8 lbs/carton
Preformed
Outside Corner
Molded PVC un-
reinforced membrane
For use in flashing outside corners of
base and curb flashings
8" diameter
20 corners/carton
2.4 lbs/carton
Coated Metal
Sheets
24 gauge steel
with .040" thick
membrane film
PVC un-reinforced membrane is
laminated to galvanized sheet metal
Cuts and forms like standard sheet
metal.
Field and flashing membranes heat
weld directly to coated metal
For metal gravel stops, and drip
edges; metal base and curb flashings;
sealant pans and scupper sleeves
4' x 10' sheets,
10 sheets/pallet
30 sheets/pallet (White Only)
520 lbs/pallet,
1560 lbs/pallet
UN-80 T-Joint
Cover Patches
.080" thick un-
reinforced membrane:
white/gray and
white/tan
Conforming membrane seal over
t-joints in 60 and 80 mil membrane
applications
6-3/4" diameter
100 patches/carton
9.3 lbs/carton
UN -80 24"
Detailing
Membrane
.080" thick un-
reinforced membrane:
white/gray and
white/tan
Alternative flashing material for
penetrations and corners
Required wherever preformed vent
boots can not be used
24" x 50' roll
42 lbs/roll
UN -80 12"
Flashing
Membrane
.080" thick un-
reinforced membrane:
white/gray and
white/tan
Alternative flashing material for
penetrations and corners
Required wherever preformed vent
boots can not be used
12" x 50' roll
21 lbs/roll
Description
The GAF EverGuard
®
PVC single-ply roofing system includes an extensive line of EverGuard PVC flashing accessories for use
with EverGuard PVC roofing systems. EverGuard flashing accessories are heat welded to the EverGuard roofing membrane. They
are easy to install and provide secure protection from roof edge to parapet to penetration to wall. The following EverGuard PVC
flashing accessories are available in standard colors of white and gray:
Storage
Store accessory flashing materials in original cartons, rolls or sheets on pallets or shelving, in a dry area. Product Data Sheet
EverGuard
®
PVC
Accessories
30
Product Data Sheet 16
Product
Description
Benefit/Application
Quantity/Size
Weight
UN -80 6"
Detailing Strip
.080" thick un-
reinforced mem-
brane: white/gray
and white/tan
For use in stripping in PVC coated
metal
6" x 150' roll
40 lbs/roll
Cut Edge
Sealant
Semi-clear liquid
thermoplastic sealant
For sealing the cut edges of
reinforced PVC membrane.
12 pint bottles/carton
(4) 1 gallon cans/carton
14 lbs/carton
38 lbs/carton
Preformed Pitch
Pocket
Molded rigid PVC
pocket, 6-1/2" in
diameter by 3-3/4"
high
Split prefabricated PVC pitch pocket
for easy installation around single or
multiple pipes
12 pockets/carton
(White Only)
24 lbs/carton