le for its content.
#0515-BenchTopGuide1 (Page 1)
BENCH-TOP GUIDE
BENCH-TOP GUIDE
HIGH-SPEED METAL FINISHING TECHNIQUE
SS White has applied its 75 years of experience in rotary cutting
instruments to bring new, uniquely designed metal finishing burs
to the dental laboratory - specifically designed and conveniently
packaged to be used with an improved metal finishing technique.
SS White friction grip dental laboratory burs, used with the High-
Speed Metal Finishing Technique described below, are designed to
decrease metal finishing time substantially, while reducing the
associated physical stress in the process.
EQUIPMENT REQUIREMENTS:
High-speed friction grip handpiece
Protective eyewear and apron
SAFETY FIRST:
1. Perform metal finishing in front of a local exhaust station.
2. Wear a full-face shield, or a face mask and safety eyeglasses.
3. Wear a nylon or plastic bib or apron.
4. Metal particles can irritate. Do not touch or rub eyes or face when metal finishing.
5. Wash hands immediately after metal finishing.
6. If skin is sensitive, wear fitted latex gloves during metal finishing.
INSTRUCTIONS FOR USE
NOTE: For best results use a pencil grip grasp and light pressure. Place the bur on the metal surface and move the rotating bur toward you.
Step 1
Gross Reduction
SS White cross-cut, large tapered cylinder, round-tip bur (EL1)
Begin gross reduction of the coping (metal substrate) at
the sprue area with the EL1. Continue gross reduction of exces-
sive bulk, contouring the metal into the general shape and thick-
ness desired.
Step 2 Gross Reduction
SS White cross-cut, large bud-shaped bur (EL2)
Further gross reduction may also be accomplished by using
the EL2 to finish around metal collars, pontic connectors,
and chamfer margins where a designated contour is required.
EL1
EL2
EL3 EL4 EL5
EL1
EL2
EL3 EL4 EL5
FG
7006
SS White High-Speed Metal Finishing Burs
EL1
EL1
EL2
EL2
FG
7006
Job #:
File:
SS WHITE PRINT APPROVAL
Please proofread, date & sign for approval to print
Director, Sales & Marketing:
Creative Department:
Product Manager:
Legal:
CE/ISO:
Technical:
SS White Burs, Inc.
1145 Towbin Ave.
Lakewood, NJ 08701 USA
#0515
BenchTop Guide
REORDER INFORMATION
Order #16100
Express Line Kit
Order #16101
EL1
10-PK
Order #16102
EL2
10-PK
Order #16103
EL3
10-PK
Order #16104
EL4
10PK
Order #16105
EL5
10PK
Order #15088
FG7006
1-PK
BENCH-TOP GUIDE
BENCH-TOP GUIDE
HIGH-SPEED METAL FINISHING TECHNIQUE
Step 3
Textured Finish
SS White cross-cut, thin cylinder, round-tip bur (EL3)
Now that the coping (metal substrate) has been contoured to
the desired thickness, use the EL3 to place a textured finish
on all porcelain bearing surfaces in preparation for porcelain
application.
Step 4
Textured Finish
SS White cross-cut round bur (EL4)
Use the EL4 to finish all porcelain-bearing surfaces at cham-
fered margins, under pontics, and at embrasures to attain a
textured finish in preparation for porcelain application.
Optional Technique:
If any pits or porosities become visible on the surface of the coping (metal sub-
strate), use EL5 or FG7006 smooth cutting burs to refinish the metal surface
until the imperfections are no longer visually apparent. Then, continue creating
a textured finish with the EL3 or EL4 to prepare the surface for porcelain.
EL3
EL3
EL4
EL4
FG7006
FG7006
EL5
EL5
SS White multi-fluted, cylinder, round-tip bur for
smooth finish (EL5)
SS White multi-fluted, round finishing bur for
smooth finish (FG7006)