> Yahoo! is not affiliated with the authors of this page or responsible for its content.
SOLO general specifications
1
Subject to technical modifications without notice. © 2002
Rear mounting sockets
Cabinet profile
Drawer profile
262(H/F) series for frame cabinets
262. series for panel cabinets
SOLO general specifications
SOLO for frame cabinets
The 262(H/F) series cabinet profiles have
integral front brackets for frame mounting
and use rear sockets for rear attachment.
They are designed to work with the standard-
ized American face-frame cabinet depths of:
24", 21", 18", 15" and 12". The synthetic rear
mounting sockets self-align the drawer and
are screwed to the cabinet back.
Cabinet and drawer profiles
Cream color, epoxy-coated steel, force
guided on right, tolerance on left.
Self-closing action on all profiles.
Positive lift-over stop for drawer removal.
Runners attach to the drawer bottom with
wood screws.
Rollers
Synthetic, self-lubricating on tempered
steel axles.
Rear mount sockets
Synthetic, self-aligning side-to-side,
height and depth adjustable.
Weight capacities*
75 lbs Dynamic for 100,000
open/close cycles
100 lbs Static applied to half extended
drawer
* As per ANSI/BHMA 156.9-1994 specifications on a
21" length drawer.
SOLO for panel cabinets
The cabinet profiles of the SOLO 262. series
have integral front and rear brackets that
attach to the side or bottom of a cabinet.
The mounting holes in these brackets are
in a 32mm pattern, front-to-back, to work in
system cabinets.
Series compatibility
Both SOLO series are designed with identical
drawer width and height specifications. This
makes it possible to mix SOLO runner series
in the same cabinet with the same drawer
size. The prime example is a bottom mounted
roll-out tray in a frame cabinet.
System compatibility
SOLO is engineered to be compatible with
Blums TANDEM. This permits an upgrade
from SOLO to TANDEM (including TANDEM
plus full extension series) without changing
drawer specifications.(see page 5)
General specifications
Cabinet profile
Drawer profile 2
Subject to technical modifications without notice. © 2002
36.
3
(1-7/16"
)
36.
3
(1-7/16"
)
36.
3
(1-7/16"
)
1
3.8
(9/16"
)
12.7
(1/2")
1
3.8
(9/16"
)
12.7
(1/2")
1
3.8
(
9/16"
)
12.7
(
1/2"
)
36.
3
(1-7/16"
)
36.
3
(1-7/16"
)
36.
3
(1-7/16"
)
1
3.8
(9/16"
)
12.7
(1/2")
1
3.8
(9/16"
)
12.7
(1/2")
1
3.8
(
9/16"
)
12.7
(
1/2"
)
36.
3
(1-7/16"
)
36.
3
(1-7/16"
)
36.
3
(1-7/16"
)
1
3.8
(9/16"
)
12.7
(1/2")
1
3.8
(9/16"
)
12.7
(1/2")
1
3.8
(
9/16"
)
12.7
(
1/2"
)
610
(24")
533
(21")
457
(18")
381
(15")
305
(12")
457
(18")
381
(15")
305
(12")
229
(9")
533
(21")
Positioning tab
Positioning dimple
Dimensions in millimeters (inch equivalents as noted)
TANDEM plus
Height compatible drawer runner systems
TANDEM
SOLO
SOLO / TANDEM interchangeable drawer runners
The full extension TANDEM plus series runner
establishes the standard height used for the
concealed runners.
The standard extension TANDEM series
runner has a stamped positioning tab that
raises the mounting holes up to the same
height as the TANDEM plus.
The standard extension SOLO series runner
has a positioning dimple that raises the
mounting holes up to the same height as the
TANDEM and TANDEM plus.
The standard mounting position of the concealed runner series gives each runner an identical mounting position in the cabinet and
allows for identical drawer box positioning in the cabinet opening. The standard mounting position allows for simple interchangeability.
Standard mounting position
The TANDEM and SOLO series runner systems are based on the standard 3" cabinet system, therefore the runner lengths come in 3" increments.
TANDEM plus
TANDEM
SOLO