ing applications.
TDAS PLUS Wireless Ethernet (WETn)
Crashworthy, wireless Ethernet communications and
data download
Reliably transmits data between two locations such as
the impact sled and the control room
The cornerstone of DTS wireless approach is our time tested,
crash-hardened TDAS Wireless Ethernet system. This device
uses industry-standard 802.11b/g/n protocols and antenna(s)
to optimize performance. This multi-function device offers the
flexibility to wirelessly connect multiple Ethernet networked
devices in a chain. Push button technology configures
wireless security.
The convenience of life without wires has been
accepted by crash laboratories around the globe.
For customers who like to run sled, vehicle or
other tests without umbilical cables, DTS offers a
complete line of solutions that no other DAS
supplier can match.
Do you want to communicate with your TDAS
remotely? The TDAS PLUS Wireless Ethernet is
your solution.
Do you want to control testing systems such as
DAS, lights and imagers, remotely? Then the
TDAS PLUS Wireless I/O is your answer.
Is reliable, on-board power your biggest concern?
DTS has two solutions; the TDAS PLUS Smart
Battery and TDAS PLUS Mini Smart Battery.
We can help you choose the right product for
your application.
TDAS PLUS Smart Battery and
TDAS PLUS Mini Smart Battery
Reliable, on-board power
Eliminates trailing cables
TDAS PLUS Smart Battery and TDAS PLUS Mini Smart
Battery devices include Lithium polymer battery
systems for onboard DAS and cameras with Ethernet
interface for battery status. Complete power solutions
for severe testing applications.
TDAS PLUS Mini Smart Battery (left) and
TDAS PLUS Smart Battery (right)
Crash
Ready TDAS WIRELESS SOLUTIONS
TDAS PLUS WIO
Crashworthy, wireless on/off signals to/from control room and test vehi-
cle/sled
Matched Master/Slave pair with 8 inputs and 8 outputs
Optically isolated and compatible with 3-30 V logic and PLCs
LED indicators for each channel
902-928 MHz spread spectrum with range up to 300 m
Several antenna options to optimize performance
<150 msec latency
Nominal 12 V input power with protection
If communication is lost,
- I/O channels latch in most recent state
- Status output indicates loss of signal
Can be used with any system or device capable of sending
an on/off, high/low or equivalent signal
TDAS PLUS WET
Crashworthy, wireless Ethernet communications
Vehicle-mounted WiFi bridge/client
Control room WiFi access point
Supports 802.11b/g/n
300 Mbps maximum throughput
100 Mbps auto sensing
2.4 GHz operating frequency
250 meters maximum range
LED status indicators
Nominal 12 V input power with protection
supports modern encryption standards - WPA/WPA2, PSK, TKIP, AES,
TKIP and AES, and Radius
TDAS PLUS SMART BATTERY
Reliable on-board power for DAS,
i
Dummies and imagers
400 watt hour capacity
18-36 VDC input
18-36 VDC output (typically 24-28V when discharging)
Fully monitored battery status via TDAS Control software or
web browser
LED indicators for battery capacity (full, 3/4, 1/2 and 1/4)
Fast charge (less than two hours)
Built and designed for use with the TDAS PLUS System Distributor
TDAS PLUS MINI SMART BATTERY
Reliable, on-board power
18-36 VDC input
One 18-36 VDC (250 W maximum) output and ten
12/15 VDC (4.5 A) outputs
Fully monitored battery status via TDAS Control software or
web browser
LED indicators for battery capacity (full, 3/4, 1/2, and 1/4) status
and communication
Fast charge (less than two hours)
Specifications may be revised without notice.
Corporate
Headquarters
909 Electric Ave., Suite 206
Seal Beach, CA 90740
USA
Phone: +1 562 493 0158
Fax: +1 562 493 3158
Email: sales@dtsweb.com
For a complete list of regional sales and support contacts, please visit www.dtsweb.com
Revised 5/08