the Construction Specifications
Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described
in The Project Resource ManualCSI Manual of Practice.

The section must be carefully reviewed and edited by the Architect to meet the requirements of the
project and local building code. Coordinate this section with other specification sections and the
Drawings. Delete all Specifier Notes when editing this section.

Section numbers and titles are from MasterFormat 1995 Edition, with numbers and titles from
MasterFormat 2004 Edition in parentheses. Delete version not required.


SECTION 08582 (08 56 19)

PASS-THRU WINDOWS


Specifier Notes: This section covers Ready Access flush-mount and bump-out pass-thru windows.
Consult Ready Access for assistance in editing this section for the specific application.


PART 1
GENERAL

1.1
SECTION INCLUDES

A.
Pass-thru windows.

1.2
RELATED SECTIONS

Specifier Notes: Edit the following list of related sections as required for the project. List other sections
with work directly related to this section.

A.
Section 07620 (07 62 00) - Sheet Metal Flashing and Trim.

B.
Section 07920 (07 92 00) - Joint Sealants.

Pass-Thru Windows
08582 (08 56 19) - 2
Specifier Notes: Delete the following sentence if electrical power is not required to operate the pass-
thru windows.

C.
Section 16100 (26 05 00) - Wiring Methods (Common Work Results for Electrical).

1.3
REFERENCES

Specifier Notes: List standards referenced in this section, complete with designations and titles. This
article does not require compliance with standards, but is merely a listing of those used.

A.
ASTM A 240 - Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet,
and Strip for Pressure Vessels.

B.
ASTM A 653 - Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed)
by the Hot-Dip Process.

C.
ASTM B 209 - Aluminum and Aluminum-Alloy Sheet and Plate.

D.
ASTM B 221 - Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes.

E.
ASTM C 1048 - Heat-Treated Flat Glass--Kind HS, Kind FT Coated and Uncoated Glass.

1.4
SUBMITTALS

A.
Comply with Section 01330 (01 33 00) - Submittal Procedures.

B.
Product Data: Submit manufacturer's product data, including materials, components,
fabrication, finish, and installation instructions.

Specifier Notes: Delete electrical wiring diagrams from shop drawings requirements if electrical power
is not required to operate the pass-thru windows.

C.
Shop Drawings: Submit manufacturer's shop drawings, including plans, elevations, sections,
and details, indicating dimensions, tolerances, materials, fabrication, glazing, fasteners,
hardware, finish, electrical wiring diagrams, options, and accessories.

D.
Samples: Submit manufacturer's samples of standard finishes.

E.
Manufacturer's Certification: Submit manufacturer's certification that materials comply with
specified requirements and are suitable for intended application.

F.
Manufacturer's Project References: Submit list of successfully completed pass-thru window
projects, including project name and location, name of architect, and type and quantity of pass-
thru windows installed.

Specifier Notes: Delete electrical wiring diagrams from operation and maintenance manual
requirements if electrical power is not required to operate the pass-thru windows.

G. Operation and Maintenance Manual: Submit manufacturer's operation and maintenance
manual, including operation, maintenance, adjustment, and cleaning instructions, trouble
Pass-Thru Windows
08582 (08 56 19) - 3
shooting guide, parts list, and electrical wiring diagrams.

H.
Warranty: Submit manufacturer's standard warranty.

1.5
QUALITY ASSURANCE

A.
Manufacturer's Qualifications: Minimum of 25 years successful experience continuously
manufacturing pass-thru windows.

1.6
DELIVERY, STORAGE, AND HANDLING

A.
Delivery: Deliver materials to site in manufacturer's original, unopened containers and
packaging, with labels clearly identifying product name and manufacturer.

B.
Storage: Store materials in clean, dry area indoors in accordance with manufacturer's
instructions.

C.
Handling: Protect materials and finish from damage during handling and installation.


PART 2
PRODUCTS

2.1
MANUFACTURER

A.
Ready Access, Inc., 1815 Arthur Drive, West Chicago, Illinois 60185. Toll Free (800) 621-5045.
Phone (630) 876-7766. Fax (630) 876-7767. Web Site www.ready-access.com. E-Mail
ready@ready-access.com.

Specifier Notes: Specify the required pass-thru windows and delete the others. Consult Ready Access
for assistance in determining pass-thru windows for the specific application.

Specify the service opening size, opening direction, clear or tinted glass, and color of the silicone
glazing sealant for each pass-thru window. Custom service opening sizes are available.

2.2
FLUSH-MOUNT PASS-THRU WINDOWS

A.
Flush-Mount Pass-Thru Windows: 275 Single Panel Manual Open/Self-Closing Slider Window.
1.
Service Opening: [19 inches wide by 36 inches high] [19 inches wide by 28 inches high]
[19 inches wide by 22 inches high] [ ________ inches wide by ________ inches high].
2.
Door Operation:
a.
Open: Manual.
b.
Close: Manual or self-closing.
3.
Door Type: Sliding, 1 door panel.
4.
Opening Direction: [Right to left] [Left to right].
5.
Frame: Extruded aluminum, ASTM B 221, Alloy 6063-T6 and 6063-T52.
6.
Aluminum Sheet: ASTM B 209, Alloy 5005-AQ-H34.
7.
Galvanized Steel Sheet: ASTM A 653, G90.
8.
Bottom Sill: Angled downward, track-free.

Specifier Notes: Delete the optional security bar set if not required.

Pass-Thru Windows
08582 (08 56 19) - 4
9.
Security: Automatically locks each time door closes. [Security bar set.]
10. Security Lock: Aluminum bar extrusion with sliding spring-loaded locking clip.
11. Fasteners: Stainless steel rivets and hex-head zinc-plated self-threading machine screws.
12. Handle: Black Delrin handle with pressed-in stainless steel spring pins. Stainless steel
handle mounting bracket. Stainless steel spring-loaded mounting base.
13. Glazing: 1/4-inch tempered glass, ASTM C 1048, [clear] [tinted].
14. Silicone Glazing Sealant: Dow Corning 999A, [bronze] [aluminum] [champagne].

B.
Flush-Mount Pass-Thru Windows: 275 M.O.E.R. Single Panel Manual Open/Electronic Release
Slider Window.
1.
Service Opening: [19 inches wide by 36 inches high] [19 inches wide by 28 inches high]
[19 inches wide by 22 inches high] [ ________ inches wide by ________ inches high].
2.
Door Operation:
a.
Open: Manual.
b.
Close: Magnetic release with electronic presence sensor.
3.
Door Type: Sliding, 1 door panel.
4.
Opening Direction: [Right to left] [Left to right].
5.
Frame: Extruded aluminum, ASTM B 221, Alloy 6063-T6 and 6063-T52.
6.
Aluminum Sheet: ASTM B 209, Alloy 5005-AQ-H34.
7.
Galvanized Steel Sheet: ASTM A 653, G90.
8.
Bottom Sill: Angled downward, track-free.

Specifier Notes: Delete the optional security bar set if not required.

9.
Security: Automatically locks each time door closes. [Security bar set.]
10. Security Lock: Aluminum bar extrusion with sliding spring-loaded locking clip.
11. Fasteners: Stainless steel rivets and hex-head zinc-plated self-threading machine screws.
12. Handle: Black Delrin handle with pressed-in stainless steel spring pins. Stainless steel
handle mounting bracket. Stainless steel spring-loaded mounting base.
13. Glazing: 1/4-inch tempered glass, ASTM C 1048, [clear] [tinted].
14. Silicone Glazing Sealant: Dow Corning 999A, [bronze] [aluminum] [champagne].
15. Electrical: 104/120 V, 3 A, 60 Hz.

C.
Flush-Mount Pass-Thru Windows: 275 Single Panel Electric Slider Window.
1.
Service Opening: [19 inches wide by 36 inches high] [19 inches wide by 28 inches high]
[19 inches wide by 22 inches high] [ ________ inches wide by ________ inches high].
2.
Door Operation: Fully automatic with electronic presence sensor.
3.
Door Type: Sliding, 1 door panel.
4.
Opening Direction: [Right to left] [Left to right].
5.
Frame: Extruded aluminum, ASTM B 221, Alloy 6063-T6 and 6063-T52.
6.
Aluminum Sheet: ASTM B 209, Alloy 5005-AQ-H34.
7.
Galvanized Steel Sheet: ASTM A 653, G90.
8.
Bottom Sill: Angled downward, track-free.

Specifier Notes: Delete the optional security bar set if not required.

9.
Security: Automatically locks each time door closes. [Security bar set.]
10. Security Lock: Aluminum bar extrusion with sliding spring-loaded locking clip.
11. Fasteners: Stainless steel rivets and hex-head zinc-plated self-threading machine screws.
12. Handle: Black Delrin handle with pressed-in stainless steel spring pins. Stainless steel
handle mounting bracket. Stainless steel spring-loaded mounting base.
Pass-Thru Windows
08582 (08 56 19) - 5
13. Glazing: 1/4-inch tempered glass, ASTM C 1048, [clear] [tinted].
14. Silicone Glazing Sealant: Dow Corning 999A, [bronze] [aluminum] [champagne].

Specifier Notes: Specify one of the following electrical requirements.

15. Electrical: [115 V, 60 Hz, with 15 A branch circuit] [220 V, 50/60 Hz, with 8 A branch
circuit].

D.
Flush-Mount Pass-Thru Windows: 375 Double Panel Slider Window.
1.
Service Opening: [26 inches wide by 34 inches high] [26 inches wide by 26 inches high]