-This page intentionally left blank-

ue>Help for Webmasters « back to results for ""
Below is a cache of http://www.satlantic.com/documents/357118_HyperOCR_Operation_Manual_revB.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
-This page intentionally left blank- -This page intentionally left blank- I
NSTRUMENT
O
PERATION
M
ANUAL
Operation Manual for the
HyperOCR
Document No. SAT-DN-00249
Revision B, May 2007
SatNet Type A Compliant Revision: B
Document No.: SAT-DN-00249
- Copyright © 2004 by Satlantic -
Page: ii
-This
page intentionally left blank- Revision: B
Document No.: SAT-DN-00249
- Copyright © 2004 by Satlantic -
Page: iii
Operation Manual For: HyperOCR
Document Number: SAT-DN-00249
Prepared by:
Satlantic Incorporated
3481 North Marginal Road,
Halifax, Nova Scotia
B3K 5X8
Tel (902) 492-4780
Fax (902) 492-4781
Email:
info@satlantic.com
Web:
www.satlantic.com
Copyright © 2004 by Satlantic
This
document contains information proprietary to Satlantic or to
a third party to which Satlantic may have legal obligation to
protect such information from unauthorized disclosure, use or
duplication. Any disclosure, use or duplication of this document,
in whole or in part, or of any of the information contained herein
for any purpose other than the specific purpose for which it was
disclosed is expressly prohibited, except as Satlantic may
otherwise agree to in writing. SYSTEM
HyperOCR Hyperspectral Radiometer
Operation Manual
SECTION
TABLE OF CONTENTS
Revision: B
Document No.: SAT-DN-00249
- Copyright © 2004 by Satlantic -
Page: iv
A - OVERVIEW ............................................................................................................................ A-1
P
URPOSE
....................................................................................................................................A-2
B
ACKGROUND
.............................................................................................................................A-2
F
EATURES
...................................................................................................................................A-2
H
YPER
OCR C
ONFIGURATIONS
....................................................................................................A-3
S
PECIFICATIONS FOR
H
YPER
OCR-I (
IN WATER
) - N
OMINAL
C
HARACTERISTICS
..............................A-5
S
PECIFICATIONS FOR
H
YPER
OCR-I (
IN AIR
) - N
OMINAL
C
HARACTERISTICS
....................................A-6
S
PECIFICATIONS FOR
H
YPER
OCR-R - N
OMINAL
C
HARACTERISTICS
..............................................A-7
B - SAFETY & HAZARDS........................................................................................................... B-1
P
ERSONAL
S
AFETY
......................................................................................................................B-1
I
NSTRUMENTS
.............................................................................................................................B-1
C
ABLE
.........................................................................................................................................B-1
C
ONNECTIONS
.............................................................................................................................B-1
T
ROUBLESHOOTING
.....................................................................................................................B-2
R
ECOVERY
..................................................................................................................................B-2
C - START UP ............................................................................................................................. C-1
A
SSEMBLY
P
ROCEDURE
.............................................................................................................. C-1
Preparation ........................................................................................................................... C-1
Connecting the Components ................................................................................................ C-2
Network Assembly ................................................................................................................ C-2
C
ONDUCT A
T
ELEMETRY
T
EST
..................................................................................................... C-3
D - OPERATION.......................................................................................................................... D-1
I
NITIALIZATION
S
EQUENCE
........................................................................................................... D-1
A
UTONOMOUS
O
PERATION
.......................................................................................................... D-2
N
ETWORK
O
PERATION
................................................................................................................ D-4
N
ETWORK
M
ASTER
O
PERATION
.................................................................................................. D-4
T
ELEMETRY
F
ORMAT
.................................................................................................................. D-6
E - CONFIGURATION ..................................................................................................................E-1
C
OMMAND
C
ONSOLE
...................................................................................................................E-1
Reset Command....................................................................................................................E-3
ID Command..........................................................................................................................E-4
Power Command ...................................................................................................................E-4
Set Command........................................................................................................................E-4
Show Command ....................................................................................................................E-5
Save Command .....................................................................................................................E-6
Ping Command ......................................................................................................................E-6
Remote Command.................................................................................................................E-7
Query Command ...................................................................................................................E-8
Sample Command .................................................................................................................E-8
Shutter Command................................................................................................................E-10
Exit and Exit! Commands ....................................................................................................E-10
H
YPER
OCR C
ONFIGURATION
P
ARAMETERS
...............................................................................E-10
Telemetry Baud Rate...........................................................................................................E-11
Maximum Frame Rate .........................................................................................................E-11
Initialize Silent Mode............................................................................................................E-13 SYSTEM
HyperOCR Hyperspectral Radiometer
Operation Manual
SECTION
TABLE OF CONTENTS
Revision: B
Document No.: SAT-DN-00249
- Copyright © 2004 by Satlantic -
Page: v
Initialize Power Down ..........................................................................................................E-13
Initialize Automatic Telemetry..............................................................................................E-13
Network Mode......................................................................................................................E-14
Network Address .................................................................................................................E-14
Network Baud Rate..............................................................................................................E-14
Network Master Mode..........................................................................................................E-15
Master Controlled Telemetry ...............................................................................................E-15
Master Network Bias..............................................................