olspan=2>
FOR MORE INFORMATION CONTACT: Al Powers, Tim Ernst, Dennis Blasberg, or Rich Kline. P & E Engineering Co. 245 S. 5
FOR MORE INFORMATION CONTACT:
Al Powers, Tim Ernst, Dennis Blasberg, or Rich Kline.
P & E Engineering Co.
245 S. 5
th
Street
P.O. Box 620
Carlisle, IA 50047
Phone:
515-989-3083
FAX:
515-989-3138
Email: peengr @ peengr.com
Web Page www.peengr.com
P & E Engineering Co.
245 S. 5
th
Street
P.O. Box 620
Carlisle, IA 50047
Phone: 515-989-3083
FAX: 515-989-3138 P & E Engineering Co. is a full service engineering consulting
firm that specializes in the needs of the electric utility industry.
We provide both analysis and design services for distribution
systems, substations, transmission lines, relay & control
systems, and communications systems. The following is a
partial list of the services P & E Engineering can provide.
DISTRIBUTION SYSTEMS
v
Design of Overhead and Underground Distribution Lines
v
Special Expertise in Downtown Networked Distribution Systems
v
Design and Construction Standards
v
Conductor
Selection
v
Feeder System Criteria
v
Expansion Planning Criteria
v
Purchasing Specifications and Standards
v
Mapping & Analysis System Specifications and Data Development
v
Field Auditing for Mapping or AM/FM Systems
SUBSTATIONS
v
Complete Design of 2.4kV 345kV Substations
v
Design of Modifications and Additions to Existing Stations
v
Equipment Specifications and Standards
v
Metalclad Switchgear Design and Specifications
v
High Voltage Capacitor Bank Design Including Analysis of Switching
Transients
v
Grounding System Measurements and Design
v
Voltage
Upgrading
v
Construction
Specifications
v
Design of Generator Connections
TRANSMISSION LINES
v
Design of Transmission Lines through 345kV
v
Design of Relocations, Repoling, Reconductoring and Voltage
Upgrades
v
Completion of Franchise Applications
SPECIALTY SERVICES
v
Electrical Equipment Failure Analysis
v
Electrical Accident & Fire Investigation
v
Expert
Witness
Testimony
v
Operational
Support
SYSTEM PROTECTION
v
Design of Protection Systems through 345kV
v
Design of Protection for Transmission, Generation and Distribution
v
Conversion of Electromechanical to Microprocessor Systems
v
Protective Relay Settings
v
Protection System Coordination Studies
v
Protective Relay System Operation or Misoperation Evaluation
v
Schematic and Wiring Diagram Designs
v
Relay Panel Construction Design and Specifications
v
Customer-owned Generation Interface Design
v
Automatic Synchronization System Design
v
Programmable Logic Controller (PLC) Implementation
v
SCADA
Implementations
STUDIES & SYSTEM ANALYSIS
v
Short Circuit and Interrupting Capability
v
Load Flow and System Expansion Planning
v
Power Factor Correction
v
Harmonic Problem Evaluation and Correction
v
Electromagnetic Transient (EMTP) Studies
v
Switching Transient and Insulation Coordination Studies
COMMUNICATIONS
v
Power Line Carrier Applications
v
Protective Relay Audio Tone Transceiver Applications
v
Protective Relay Fiber Optic Channel Applications
v
Fiber Optic Data System Design
METERING SYSTEMS
v
Design of Interconnection Metering Installations
v
Meter Installation Connection Error Evaluation
The real strength of P & E Engineering Co. resides in our people.
Our personnel have many years of actual utility based design and
operational experience with power systems. In addition, our people
have been involved with the consulting engineering role for a
number of years. We have seen many of the problems that you
might experience on your systems and understand the real world
constraints under which you operate. We strive to provide you with
the most cost effective and practical solution to your design or
analysis projects.