n Guide .....................................................................P3
Technical Information
PSM242A ...............................................................................................P4
PSM244A ...............................................................................................P5
PSM2410A .............................................................................................P6
PSM2410C .............................................................................................P7
PSM2410B .............................................................................................P8
Dimensions .............................................................................................P9 P2
P
ower

Supplies
ADEL
P
SSCDN8500E
Sprecher + Schuh is proud to bring you
the best in AC to DC power supplies.
Power from a Source
you can Trust
Established in 1991, ADEL System
designs and manufactures high quality
industrial power supplies. Their years
of development effort, focused on
switching technology, enables ADEL
to satisfy a wide range of applications
in industrial automation. This range
of products can meet the most
demanding requirements for AC to
DC switching power supplies.
ADEL system also manufacturers DC
to DC switching, as well as linear
power supplies, UPS systems and
battery chargers. ADEL also designs
custom power electronic solutions
to fit the unique demands of special
applications. A highly experienced
engineering team insures high quality
and cost-efficiency.
Quality to the Highest
Standard
100% of ADELs products are tested
in the factory. Each product undergoes
functional tests, or 2-hour run-in
test at maximum operating voltage
and current. The PSM product range
features long duration electrolytic
capacitors designed for long life in
rugged industrial applications. The
compatibility with CE requirements
on electromagnetic interference is fully
Industrial
Switching Power
Supplies
High Quality AC to DC
power with up to 125%
reserve capacity
tested in the laboratory. The ADEL
power supplies are backed with an
extended 2-year warranty.
Unparalleled Benefits
ADEL system Power Supplies offer
unparalleled benefits in the industry:
Metal Case IP 20 provides excellent
heat dissipation
125% Reserve Power for 1 minute
Start-up demand up to 5 times
normal current for 500ms
Built-in overload protection
Internally fused for short-circuit
protection
480V models for connection
without the need for control
transformers
Easy Installation, DIN Rail
Mountable
Wide Range of
Applications
ADEL system Power Supplies can
apply to numerous applications and
industries:
PLC and Smart Relay power
Proximity Switches
Light Curtains
Textile & Robotic Machinery
Material Handling Equipment
Metal & Wood Working
Freezers & Refrigerators
Building Automation
Air Cleaning Systems
Packing Equipment
®
C
US
60950
R
508
IND. CONT. EQ.
2-Year
Warranty Discount Schedule T-6
P3
P
ower

Supplies
ADEL
P
SSCDN8500E
Input Voltage
VAC
Watts
Output Voltage
VDC
Output
Amps
Catalog
Number
Price
Single
Phase
115-230
60
24
2.5
PSM242A
230
115-230
120
24
5
PSM244A
345
115
240
24
10
PSM2410A
500
230
240
24
10
PSM2410C
500
Two Phase
400-480
240
24
10
PSM2410B
625
Industrial Switching Mode Power Supplies

Power supplies are UL508 approved allowing for application in industrial control equipment (control panels) without derating at 50ºC or less.

Power supplies are cCSAus approved under 60950 allowing for application in controlled environment (ie. computer rooms): 25ºC max, Pollution Category
No.2, Over Voltage category No.2.

CSA approval under 601010 allowing for application in industrial control panels: 40ºC max, Pollution Category No.3, Over Voltage category No.3 is pending.
Industrial Switch Mode Power Supplies
ADEL system
Industrial Approvals ®
C
US
60950
R
508
IND. CONT. EQ. P4
P
ower

Supplies
ADEL
P
SSCDN8500E
Discount Schedule T-6
PSM242A
Input: single-phase
115 - 230 V AC
Output: One output
2.5 A @ 24 V DC

60 Watts
Strong overload without switch-off
Short-circuit protection
Over-voltage protection
IP20
DIN Rail Mountable
Extremely small size
Input Data
Input Rated Voltage (2 x V AC)
115230 V AC
Rated Voltage range
93264 V AC
Inrush Current (Vn In)
11 A 5 msec.
Frequency
4763 Hz
Input Current (Input Rated Voltage)
0.90.5 A
Internal Fuse
Fast 4 A
External Fuse (recommended)
Fast 4 A
Output Data
Output Voltage (Vn) / Nominal Current (In)
24 V DC ±3% / 2.5A
Adjustment range (Vadj)
2226 V DC
Start up with Strong Load (capacitive load)
20.000 / 30.000µF
Switching on delay applying mains voltage 2.5 sec. (max)
Max. Continuous Current
1.1 x I
n
± 5%
Reserve Out Current (max. 1 min. 50 °C)
I
max
=I
n
+25% approx.
Hold-up Time (at 100 240 V AC)
Typ. 27 msec
Residual Ripple 60 mV
pp
Minimum Load
No
Efficiency
81 %
Short-circuit protection (hiccup mode)
Yes
Over Load protection (hiccup mode)
Yes
Over Voltage Output protection
Yes (max 35 V DC)
Parallel connection
Yes
Climatic Data
Ambient Temperature (operation)
-10+70 °C (>50°derating)
Ambient Temperature (Storage)
-25+85 °C
Humidity; no moisture condensation
95 % to 25 °C
General Data
Isolation Voltage (Input/Output)
3000 V AC
Input / ground isolation PE
1605 V AC
Output / ground isolation PE
500 V AC
Degree of protection
IP 20
Protection class
I with PE connected
Dimension (w-h-d)
50x95x155 mm
Weight
0.45 kg approx.
Norms and certifications
According to EMC 89/336/EEC and Low voltage 93/68/EEC
Electrical Safety
According to IEC/EN 60950 (VDE 0805) e EN 50178 (VDE 0160) for assembling
device. The device must be installed according to IEC/EN 60950.
Generic
Immunity according to EN50082-2 Level 4 Class B
Noise Radiation according to EN 55011
Output Derating Curve
Output Characteristic Curve U/I
Dimensions
Industrial Switch Mode Power Supplies
Technical Information P5
P
ower

Supplies
ADEL
P
SSCDN8500E
Discount Schedule T-6
PSM244A
Input: single-phase
115 - 230 V AC
Output: One output
5 A @ 24 V DC

120 Watts
Strong overload without switch-off
Short-circuit protection
Over-voltage protection
IP20
DIN Rail Mountable
Extremely small size
Input Data
Input Rated Voltage (2 x V AC)
115230 V AC
Rated Voltage range
93264 V AC
Inrush Current (Vn In)
11 A 5 msec.
Frequency
4763 Hz
Input Current (Input Rated Voltage)
0.90.5 A
Internal Fuse
Fast 4 A
External Fuse (recommended)
Fast 4 A
Output Data
Output Voltage (Vn) / Nominal Current (In)
24 V DC ±3% / 5A
Adjustment range (Vadj)
2226 V DC
Start up with Strong Load (capacitive load)
30.000µF
Switching on delay applying mains voltage
3 sec. (max)
Max. Continuous Current
1.1 x I
n
± 5%
Reserve Out Current (max. 1 min. 50 °C)
I
max
=I
n
+25% approx.
Hold-up Time (at 100 240 V AC)
Typ. 27 msec
Residual Ripple
60 m
V
pp
Minimum Load
No
Efficiency
82 %
Short-circuit protection (hiccup mode)
Yes
Over Load protection (hiccup mode)
Yes
Over Voltage Output protection
Yes (max 35 V DC)
Parallel connection
Yes
Climatic Data
Ambient Temperature (operation)
-10+70 °C (>50°derating)
Ambient Temperature (Storage)
-25+85 °C
Humidity; no moisture condensation
95 % to 25 °C
General Data
Isolation Voltage (Input/Output)
3000 V AC
Input / ground isolation PE
1605 V AC
Output / ground isolation PE
500 V AC
Degree of protection
IP 20
Protection class
I with PE connected
Dimension (w-h-d)
55x115x155 mm
Weight
0.70 kg approx.
Dimensions
Norms and certifications
According to EMC 89/336/EEC and Low voltage 93/68/EEC
Electrical Safety
According to IEC/EN 60950 (VDE 0805) e EN 50178 (VDE 0160) for assembling
device. The unit must be installed according to IEC/EN 60950.
Generic
Immunity according to EN50082-2 Level 4 Class B
Noise Radiation according to EN 55011
Industrial Switch Mode Power Supplies
Technical Information
Output Derating Curve
Output Characteristic Curve U/I P6
P
ower

Supplies
ADEL
P
SSCDN8500E
Discount Schedule T-6
PSM2410A
Input: single-phase
115 V AC
Output: One output
10 A @ 24 V DC

240 Watts
Strong overload without switch-off
Short-circuit protection
Over-voltage protection
IP20
DIN Rail Mountable
Extremely small size
Input Data
Input Rated Voltage (2 x V AC)
115 V AC
Rated Voltage range
90132 V AC
Inrush Current (Vn In)
14 A 5 msec.
Frequency
4763 Hz
Input Current (Input Rated Voltage)
3.5A max
Internal Fuse
Fast 6.3 A
External Fuse (recommended)
Fast 6 A
Output Data
Output Voltage (Vn) / Nominal Current (In)
24 V DC ±3% / 10A
Adjustment range (Vadj)
2226 V DC
Start up with Strong Load (capacitive load)
30.000µF
Switching on delay applying mains voltage
2.5 sec. (max)
Max. Continuous Current
1.1 x I
n
± 5%
Reserve Out Current (max. 1 min. 50 °C)
I
max
=I
n
+25% approx.
Hold-up Time (at 100 240 V AC)
Typ. 27 msec
Residual Ripple
60 mV
pp
Minimum Load
No
Efficiency
86 %
Short-circuit protection (hiccup mode)
Yes
Over Load protection (hiccup mode)
Yes
Over Voltage Output protection
Yes (max 35 V DC)
Parallel connection
Yes
Climatic Data
Ambient Temperature (operation)
-10+70 °C (>50°derating)
Ambient Temperature (Storage)
-25+85 °C
Humidity; no moisture condensation
95 % to 25 °C
General Data
Isolation Voltage (Input/Output)
3000 V AC
Input / ground isolation PE
1605 V AC
Output / ground isolation PE
500 V AC
Degree of protection
IP 20
Protection class
I with PE connected
Dimension (w-h-d)
132x118x135 mm
Weight
1.15 kg approx.
Output Derating Curve
Output Characteristic Curve U/I
Dim