I N S TA L L AT I O N

e free of defects in materials and
workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the fol-
lowing provisions: Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s). The product must be properly installed,
maintained and operated under normal conditions. Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products. Küryakyn shall not be liable for any consequential
and incidental damages, including labor and
paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in noncon-
forming condition, or for any breech of contract or
duty between Küryakyn and a customer. Küryakyn products are often intended for use
in specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended. Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the consumer.
Components
of Küryakyn products containing L.E.D.s
will be warranted for defects in materials and
workmanship for 3 years from the date of purchase. Küryakyn makes no warranty of any kind in regard
to other manufacturers products distributed by
Küryakyn. Küryakyn will pass on all warranties made
by the manufacturer and where possible, will expedite
the claim on behalf of the customer,
but ultimately, responsibility for disposition of the
warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
Youll find all our innovations for H-D, GL and
Metric Cruisers in our annual catalogs. Order online
todayselect the CATALOGS icon. Each
Küryakyn® product comes with a Proof-of-Purchase
good for a complimentary catalog. Details in
packaging.
Be sure to ask your local dealer about other
Küryakyn products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA
®
All Rights reserved.
I N S TA L L AT I O N
Parts Included


1 3-1/2 ® EZ Chock


1 Installation Instructions
Please read and understand entire instructions before starting installation.
thank you for choosIng küryakyn!
In order to Protect you and others from PossIble Injury and/
or ProPerty damage or loss, Please Pay close attentIon to all
InstructIons, warnIngs, cautIons and attentIon notes regardIng
the use and care of thIs Product.
WARNING!
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE
CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR
SERIOUS INJURY.
CAUTION! This indication alerts you to the fact that ignoring the contents described herein
can result in potential injury or material damage.
strIctly observe the followIng guIdelInes In order to use the
Product ProPerly and avoId PotentIally dangerous accIdents.
guIdelInes for usIng eZ chock
usIng chock In mIddle of transPort Platform
steP 1
Read and understand all steps in the instructions before using this product.

steP 2
Set the chock in place.
steP 3
Place one end of the security straps in the lower holes (see PIC.1) of the chock, and
the other ends of the security strap to a location behind the chock.
steP 4
Put the bike wheel in the chock and strap the bike to a forward location.
steP 5
The top holes of the chock (see PIC.1) may
be used to place strap over the top of the tire as an
additional securing measure.
steP 6
Additional straps can be added to the rear
of the motorcycle for additional stability. Ensure any
additional straps also pull the motorcycle in a forward
direction.
CAUTIO
N! Avoid damage to the motorcycle.
Ensure that the strap will not rub on any
components of the motorcycle.
-cont.-
fIts: dIrt bIkes or cruIsers wIth narrow front tIres
935-11HD-0108
3 - 1 / 2 e Z c h o c k



9 3 5
PIc.1
toP holes are
to Place a straP
over the toP of
the tIre
lower holes are for
securIty straPs InstallatIon
usIng chock agaInst a fIxed locatIon

steP 1
Place the front of the chock against a fixed location (i.e. front of truck bed or wall of trailer).
steP 2
Put the bike wheel in the chock and strap the bike to a forward location.
steP 3
The top holes of the chock (see PIC.1) may be used to place strap over the top of the tire as an
additional securing measure.
steP 4
Additional straps can be added to the rear of the motorcycle for additional stability. Ensure any
additional straps also pull the motorcycle in a forward direction.
WARNING! THE EZ CHOCK IS NOT DESIGNED TO BE A STAND.
IT IS THE USERS RESPONSIBILITY TO ENSURE
THAT THE MOTORCYCLE IS PROPERLY SECURED
TO THE TRANSPORT vEHICLE OR TRAILER USING
AN ADEQUATE NUMBER OF STRAPS. DEPENDING
ON THE MOTORCYCLE, ADDITIONAL STRAPS
NOT MENTIONED ABOvE MAY BE NECESSARY.
KURYAKYN WILL NOT BE HELD RESPONSIBLE FOR
ANY DAMAGE INCURRED BY FAILURE TO PROPERLY
SECURE THE MOTORCYCLE TO THE TRANSPORT
PLATFORM..
Ride On!
Page
2
e Z c h o c k
InstallatIon
eZ chock In mIddle of
transPort Platform
motorcycle
shown removed
from the chock
for clarIty; the
front tIre needs
to be fIrmly In
chock before
securIng the
motorcycle
straPs to
secure
motorcycle
chock
securIty
straPs
eZ chock agaInst a
fIxed locatIon
motorcycle
shown removed
from the chock
for clarIty; the
front tIre needs
to be fIrmly In
chock before
securIng the
motorcycle
straPs to
secure
motorcycle