g Instructions and Parts Manual
18-inch Variable Speed Drill Press
Model 2800


WMH TOOL GROUP
2420 Vantage Drive
Elgin, Illinois 60124
Part No. M-1792800
Ph.: 800-274-6848
Revision B 03/07
www.wmhtoolgroup.com
Copyright © WMH Tool Group
2
Warranty and Service
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service
Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group
Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and
major repair on your POWERMATIC
®
tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
MORE INFORMATION
WMH Tool Group is consistently adding new products to the line. For complete, up-to-date product information, check with your
local WMH Tool Group distributor, or visit powermatic.com.
WARRANTY
POWERMATIC products carry a limited warranty which varies in duration based upon the product.

WHAT IS COVERED?
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives
and other consumables are excluded from warranty coverage.
WHO IS COVERED?
This warranty covers only the initial purchaser of the product.
WHAT IS THE PERIOD OF COVERAGE?
The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.
WHAT IS NOT COVERED?
The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five
Year Warranty that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does
not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or
alterations, or lack of maintenance.
HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the
location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our
inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option.
We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the
defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the
product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the
return.
HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH
PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE
EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU.
WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR
INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are
not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts,
fittings, and accessory equipment which they may deem necessary for any reason whatsoever.
3
Table of Contents

Warranty and Service .............................................................................................................................. 2

Table of Contents .................................................................................................................................... 3

Warning................................................................................................................................................... 4

Introduction ............................................................................................................................................. 6

Specifications .......................................................................................................................................... 6

Unpacking ............................................................................................................................................... 7

Contents of the Shipping Container ...................................................................................................... 7

Assembly ................................................................................................................................................ 8

Column ................................................................................................................................................ 8

Table Bracket....................................................................................................................................... 8

Head Assembly.................................................................................................................................... 9

Installing the Fence.............................................................................................................................. 9

Installing Arbor and Chuck ................................................................................................................. 10

Chuck and Arbor Removal ................................................................................................................. 10

Grounding Instructions........................................................................................................................... 10

Extension Cords................................................................................................................................. 12

Adjustments .......................................................................................................................................... 12

Table Movement ................................................................................................................................ 12

Changing Spindle Speeds.................................................................................................................. 13

Depth Stop......................................................................................................................................... 13

Return Spring..................................................................................................................................... 13

On/Off Switch..................................................................................................................................... 14

Laser Adjustment ............................................................................................................................... 14

Operation .............................................................................................................................................. 15

Installing the Bit.................................................................................................................................. 15

Positioning the Workpiece.................................................................................................................. 15

General Inspection............................................................................................................................. 15

Setting Rotation Speed ...................................................................................................................... 15

Optional Accessory................................................................................................................................ 17

Replacement Parts ................................................................................................................................ 17

Model 2800 Drill Press ....................................................................................................................... 18

Parts List: Model 2800 Drill Press....................................................................................................... 19

Electrical Connections ........................................................................................................................... 23

Electrical Connections ........................................................................................................................... 24


4

Warning
1. Read and understand the entire owners manual before attempting assembly or operation.
2. Read and understand the warnings posted on the machine and in this manual. Failure to comply with
all of these warnings may cause serious injury.
3. Replace the warning labels if they become obscured or removed.
4. This drill press is designed and intended for use by properly trained and experienced personnel only.
If you are not familiar with the proper and safe operation of a drill press, do not use until proper
training and knowledge have been obtained.
5. Do not use this drill press for other than its intended use. If used for other purposes,