affiliated with the authors of this page or responsible for its content.
List of Paper Received




PEDES-2006
International Conference on
Power Electronics, Drives and Energy
Systems for Industrial Growth-2006
New Delhi, India 12-15 December 2006
Dear Authors,

First of all, thanks a lot for your contributions to PEDES-2006. The final list of accepted digests
for PEDS-2006 is given as an attachment to this message. This list is also available at the
conference website:
http://www.ewh.ieee.org/r10/delhi/pedes-2006.htm
. Altogether, 250 digests
have finally accepted for the conference and all the authors (including all the coauthors apart
from the corresponding author, whose email ids are shown in the submitted digests) have been
notified of the acceptance of their digest along with the reviewers comments. We have received
most of the final digests, full papers and the duly filled in IEEE copyright forms. Also, a large
number of authors have already registered for the conference.

At this juncture, I would request you to please make note of the following announcements.

1) The receipt of the final digests, full papers and duly filled in IEEE copyright forms will
be closed on 30 November 2006.
2) The registration for the conference (online as well by post) will be closed on 5 December
2006.
3) The submitted digests/papers, which are not shown in the attached list of accepted papers,
are NOT accepted for PEDES-2006 and will not appear in the Book of Digests as well as
the Conference Proceedings.
4) Thos authors who have not yet received any rejection letters, and whose digests are not
appearing in the list of the accepted digests will be receiving the notifications to this
effect shortly.
5) The conference programme will be announced latest by 1 December 2006.
6) There will be keynote talks by eminent personalities on all the three days of the
conference; 13-15 December 2006.
7) As already notified, the tutorial sessions will be held at the Indian Institute of Technology
(IIT), New Delhi on 12 December 2006 and all delegates registered for tutorial will be
reporting to Dr. M. Veerachary, Tutorial Committee Chair, in Room No. II-225,
Electrical Engineering Department Committee Room, IIIT Delhi, Hauz Khas, New Delhi
110016.
8) The conference sessions will be held in Marriott Welcome Hotel, District Center, Saket,
New Delhi 110017 from 13 to 15 December 2006 and all delegates will be reporting at
the Registration Counter at the conference venue.
9) Any queries related to the initial digest acceptance/rejection shall be addressed to Prof. K.
R. Rajagopal, Technical Programme Chair (kr_rajagopal@ieee.org).
10) Any queries related to the final digest shall be addressed to Dr. M. Veerachary,
Publications Committee (
mvchary@ee.iitd.ac.in
).
11) Any queries related to the full paper and copyright form shall be addressed to Prof.
Subrata Mukhopadyay, Publications Chair (
pesrrap@ieee.org
). 12) Any queries related to the accommodation shall be addressed to Dr. B. K. Panigrahi,
Accommodation Committee (
bkpanigrahi@ee.iitd.ac.in
, phone: +91-11-26591078) with
a copy to Prof. Bhim Singh, General Chair (
bsingh@ee.iitd.ac.in
).
13) Any queries related to the conference registration shall be addressed to Dr. Sukumar
Mishra, Registration Committee (
sukumar@ee.iitd.ac.in
, phone: +91-11-2659-1074) with
a copy marked to Prof. Bhim Singh, General Chair to (
bsingh@ee.iitd.ac.in
).
14) Any other general queries related to the conference shall be addressed to Prof. Bhim
Singh, General Chair (
bsingh@ee.iitd.ac.in
).

Finally, thanks again to all of you for your valuable contributions and I wish you all a
comfortable journey and a memorable and enjoyable stay and conference in this beautiful capital
city of India.


With best regards

Prof. K. R. Rajagopal, Technical Programme Chair, PEDES-2006











List of Digests Accepted for PEDES-2006

1A- Analysis and Design of Electrical Machines

Digest
No
Title
Name of Authors
1A-01 A Program for Harmonic Modeling of Distribution
Network Transformers and Determination of Loss
in the Transformers and the Amount of Decrease of
Their Life
Mosa Marzband
and Abdolreza Shaikholeslami

1A-02
&
1B-04
MATLAB Based Steady State Analysis of Self
Excited Induction Generator (SEIG) &
Novel Integral Cycle Voltage Controller for Self
Excited Induction Generators
S. S. Murthy, A. J. Pinto Pius
and A. R. Beig

1A-03 EMI Modeling and Simulation of High Voltage
Planar Transformer

Bai Feng, Niu Zhong-Xia,
Zhou Dong-Fang and Shi Yu-
Jie
1A-04 Graphical Estimation of Optimum Weights of Iron
and Copper of a Transformer

C. Eswarlal, V. Palanisamy,
M.Y. Sanavullah and M.
Gopila
1A-05 Nonlinear Behavior of Self-Excited Induction
Generator Feeding an Inductive Load

D. D. Ma, B. Zahawi, D.
Giaouris, S. Banerjee and V.
Pickert 1A-06 Effects of Different Voltage Sags on Three-Phase
Transformers

M. R. Shakarami and A.
Jalilian

1A-07 Design and Transient Analysis of Cage Induction
Motor Using Finite Element Methods
Bhoj Raj Singla

1A-08 Estimation of Performance Characteristics of Three
Phase Induction Motor from its Catalogue Data
Satish Chandra Sabharwal

1A-09 State Space Dynamic Modeling and Control of
Three Phase Self-Excited Induction Generator
Avinash Kishore, B.M. Karan,
R. C. Prasad and Sathish
Kumar

1A-10
&
1A-11
The Design of High Performance VVVF Induction
Motor Drives for Traction Applications &
Experience on Use of Design Soft Wares (Speed
and Magnet) For Squirrel Cage Induction Motor In
Comparison To Conventional Methods
S. S. Murthy, Bhim Singh,
G. Bhuvaneswari, Kiran Naidu
and Uddanti Siva

1A-14 Effect of Sequential Phase Energization on the
Inrush Current of a Delta Connected Transformer


K. P. Basu, Ali Asghar and
Stella Morris

1A-15 Accurate Performance Prediction of the Three phase
Induction Motor by FEM using Separate Saturatrion
Curves for Teeth and Yoke
V.Jaiswal,
M.Fazil, A.Hangal, N.Ravi.


1B- Control of Electrical Machines

Digest
No
Title
Name of Authors
1B-01
&
1B-06
A Backstepping Controller for Sensorless Speed
Control of DC Servo Motor Using Adaptive
Backstepping Observer &
Nonlinear Sliding-Mode Controller for Sensorless
Speed Control of DC Servo Motor Using Adaptive
Backstepping Observer
A. Farrokh Payam and B.
Mirzaeian Dehkordi


1B-05 Robust Speed Sensorless Control of Doubly-Fed
Induction Machine Based on Input-Output
Feedback Linearization Control Using a Sliding-
Mode Observer
A. Farrokh Payam

1B-08 Adaline based Control of Solid State Voltage
Regulator for isolated asynchronous generators
Bhim Singh,
Gaurav Kumar Kasal

1B-10 Development of a prototype controller Portable
telemetry Tracking System for defence
applications.
Parveen Kumar,
Gautam Sadhukhan
A. K. Pradhan
1B-11 Deisgn and Deveolpment of a High Performance
Electronics Starter for single phse Induction Motor.
T. P. Shenoy, J. S. Nirody 1C - Induction, Synchronous and DC Motors

Sl.No Title
Author
1C-01 Transient Analysis of a Single Phase Self-Excited
Induction Generator Using a 3-Phase Machine
Feeding Dynamic Load
S. N. Mahato,
M. P. Sharma and
S. P. Singh
1C-02 Performance Analysis of a Three-Phase Squirrel-
Cage Induction Motor under Unbalanced
Sinusoidal and Balanced Non-Sinusoidal Supply
Voltages
Tharanga Raj Chelliah,
Pramod Agarwal and S. P.
Srivastava

1C-04 Efficiency optimization of induction motor using
fuzzy logic controller


L. Ramesh, A. K. Saha, S.
Chowdhury, S. P. Chowdhury
and Y. H. Song
1C-05 Design of an Axial-Flux Induction Motor for
Electric vehicle Applications
K. R. Rajagopal
Satishbabu Bhogineni


1D - Brushless Permanent Magnet and Switched Reluctance Motors
Sl.No Title
Author
1D-01 Observer based position and speed estimation of
interior permanent magnet motor
Bhim Singh,
Prerna Gaur,
A. P. Mittal
1D-02 Optimal Design of a switching circuit parameters
for switched reluctance motor drive based on
genetic algorithm
Behzad Mirzaeian Dehkordi,
Payman Moallem
1D-04 Intelligent Tuned PID Controllers for PMSM Drive
A Critical Analysis
Rajesh Kumar, R. A Gupta and
Bhim Singh
1D-05 Reduction of Cogging Torqe in PMBLDC Motor
with Reduced Stator Tooth Width and Bifurcated
Surface Area Using Finete Element Analysis

R. Somanatham,
P. V. N. Prasad and
A. D. Rajkumar
1D-09 A novel phasor diagram of interior PMSM based on
spiral vector theory
Bishnu P. Muni
1D-10 A Novel Strategy of Torque and Flux Control for
Switched Reluctance Motor Drive
R. Jayabharath, P. Veena
and M. Rajaram
1D-11
&

1D-12
Remedial strategies for the minimization of cogging
torque in permanent magnet brushless DC motor
&
Effects of Saturation on Cogging torque in
Permanent Magnet Brushless DC motor.
M. H. Ravichandran,
VT sadasivan Achari,
Robert Devasahayam


1D-14 Fuzzy Pre-Compensated PI Controller for
PMBLDC Motor Drive
Mukesh Kumar,
Bhim Singh,
B.P.Singh
1D-15 A Simplified Des