NTROLLER



APPLICATIONS
Remote control of :

-heating

-illumination

-pumping

-watering

-electrical equipments

via telephone line.


DESCRIPTION
The DKM-453 is a unit that allows its relay
outputs controlled remotely by a standard
telephone line, in order to turn on or off
the required electrical equipment.
The DKM-453 needs no special
communication equipment. The control
commands are given by using the keys of
a DTMF telephone set (or mobile phone).
The unit has 3 output relays, and is able to
control 3 independent electrical
equipments. If needed, more units can be
connected in parallel to the same
telephone line, in order to obtain extra
outputs.
The unit has a 4-digit password in order to
eliminate unauthorized access. The control
sequence may be started by entering the
password.






SPECIFICATIONS
Rings periods before answer:
programmable between 1-8 rings.
Password: 4 digits, modified by the user,
(its use is optional, user programmable)
Programming: parameters are programmed
via telephone line.
Local control mode: YES, in this case the
unit is controlled via the keys positioned
on the unit.
Operating temperature:-10 to +70
°
C.
Relative humidity: %10 to %90.
Supply voltage range: 176 to 277 V-AC
Power consumption: 3W max
Dimensions: 96 x 48 x100 mm .(WxHxD).
Mounting hole dimensions: 92 x 44 mm
minimum.
Weight: 400g (approx.)


DATAKOM Electronics Limited
Tel : +90-216-466 84 60
Fax : +90-216-364 65 65
e-mail :
datakom@datakom.com.tr

http: www.datakom.com.tr