PLASMA TV WALL MOUNTED CORNER POST
AUTOMATIC SWIVEL
P/N 900810-5W





MASTERS OF AUTOMATION
1648 West 134
th
Street, Gardena, California 90249
(310) 808-0001 Fax (310) 808-9092 www.inca-tvlifts.com


The Plasma TV Wall Mounted Corner Post Swivel,
P/N 900810-5W is a robust, rugged motorized mount
that will hold plasma screens that are up to 61 in
size, from one edge, in an enclosure. The swivel
mount is equipped with an external junction box on a
long cable that will allow the swivel controls to be
placed at a convenient location where access to the
fuse, selector switch, and selected remote controllers
are easily achieved. This machine has a built in
adjustable clutch assembly that will tolerate the
manual overriding of the swivel, by pushing on the
plasma enclosure so as to rotate it, all with no adverse
affect.

The automatic swivel can be controlled with a rocker
switch, radio remote, or touch-screen system. The
motion of the machine encompasses a full 180°,
however, magnetic cam default stops can be readily
set within the 180° swing. Included with each unit is
a complete mounting frame system with all of the
necessary attachment hardware, to mount in a custom
fabricated Enclosure. Inca can provide this enclosure
upon request as an optional accessory. Inca can also
manufacture this unit from stainless steel for marine
application, as a special order item (for use on a
yacht).
















WALL MOUNT INSTALLATION
CORNER MOUNT INSTALLATION
PLASMA TV WALL MOUNTED CORNER POST AUTOMATIC SWIVEL
900810-5W


Capstan drive head with
clutch access adjustment
ports (3)


Unit is shown with the top trunion
cover removed for clutch and limit
switch adjustment access










































Back cover plate, 0.125 CRS
pre-punched to permit optional
rear wall connection and access
for all control, power and TV
cables.
Optional bottom
access port for cable
drops
Limit switch
Drive motor
Plasma enclosure
attachment plate
Limit switch
adjustable cam
Capstan drive assembly with internal
adjustable torque clutch
Aircraft multi-pin
connector to attach
external junction box PLASMA TV WALL MOUNTED CORNER POST AUTOMATIC SWIVEL
900810-5W







P/N 900810-5W Wall
mounted automatic
corner post swivel
assembly






P/N 900814-412-3B1
Enclosure mounting panel.
This attaches to the inside of
the enclosure on which the
plasma hangs


P/N 900814-412-3B2
Enclosure to swivel
mounting bracket
External junction box with
cable for attachment of
controllers
Mounting studs to adjust
the location of the plasma
inside the enclosure (4)
P/N 900814-412-3A1 Plasma
back mounting plate. This plate
attaches to the back of the
plasma screen