08
31
OA.1.1 -
J. Pyrhönen , J. Nerg , P. Kurronen , Uwe Lauber
OA.1.2 -
G. Munteanu , A. Binder
OA.1.3 -
J. J. Simond , M. Tu Xuan , R. Wetter
OA.1.4 -
R. Helmer, D. Wang, B. Ponick
High-Speed, 8 MW, Solid-Rotor Induction Motor for Gas Compression
Parasitic radial rotating force in magnetically levitated cage induction machines
An Innovative Inductive Air-Gap Monitoring System For Large Low Speed
Hydro-Generators
Investigation of Part- winding Start Used in Cage Induction Motors
1
1
2
3
1
1
1
1
1
1
2
3
1
1
Lappeenranta Univ. of Technology, Dep. of Elec. Eng., Finland
The Switch Oy, Lappeenranta Finland
MAN Turbo Zürich and Berlin
Dep. of Elect. Energy Conversion, Darmstadt University of Technology, Germany
Swiss Federal Institute of Technology, EPFL-STI-IEL-LME, Lausanne, Switzerland Session OA
Oral Session OA.2
15.30h - 16.50h
- PEGASO
Room B
Chairpersons:
(Sweden)
(Turkey)
Prof. Dr. Chandur Sadarangani
Prof. Dr. H. Bülent Ertan
Saturday, 6th September 2008
32
OA.2.1 -
P. Karutz , T. Nussbaumer , W. Gruber and J.W. Kolar
OA.2.2 -
Jere Kolehmainen
OA.2.3 -
A. Takahashi , S. Kikuchi , S. Wakui , K. Miyata , H. Mikami and K. Ide , A. Binder ,
OA.2.4 -
Yosiaki Kano , Takashi Kosaka , and Nobuyuki Matsui
Maximizing Acceleration Capability of Bearingless Slice Motors
Dovetail permanent magnet rotor solutions with different pole numbers
Transient-Torque Analysis for Line-Starting Permanent-Magnet Synchronous
Motors
Sensorless-Oriented Design of IPM Motors for General Industrial Applications
1
2
3
1
1
1
1
1
1
1
1
2
1
1
1
1
2
3
1
1
2
1
ETH Zurich, Power Electronic Systems Laboratory, Switzerland
Levitronix GmbH, Switzerland
Johannes Kepler University Linz, Austria
ABB Oy, Motors, Finland
Hitachi Research Laboratory, Hitachi, Ltd., Japan
Dept. of Elect. Energy Conversion, Darmstadt University of Technology, Darmstadt
Elec. Eng. Dept., Nagoya Institute of Technology, Japan
Session OA
Oral Session OA.3
15.30h - 16.50h
- FENIX I
Room A
Chairpersons:
(Poland)
(Japan)
Prof. Dr. Andrezj Krawczyk
Prof. Dr. Yoshihiro Kawase
Saturday, 6th September 2008
33
16.50h - 17.30
Coffee break
OA.3.1 -
O. Mäkelä , A. K. Repo , A. Arkkio
OA.3.2 -
A. M. El-Serafi , X. Liang and S. O. Faried
Parameter Estimation of Synchronous Machines using Numerical Pulse Test
within Finite Element Analysis
Factors Affecting the Accuracy of Determining the Saturated Synchronous
Machines Cross-Magnetizing Parameters by the Finite Element Method
1
1
1
1
2
1
1
1
2
Helsinki University of Technology TKK, Finland
Power Systems Research Group, University of Saskatchewan, Canada
Edmonton Product Center, Schlumberger, Canada
OA.3.3 -
S. Wiak , A. F. Nowacka , K. Smolka
OA.3.4 -
K. Sitapati
Computer Model of 3-D Magnetic Micro Fibres used in Textile Actuators
Air-gap Layers and Adaptive Mesh Generation For Torque Calculations in
Rotating Electrical Machines
1
1
1
1
1
1
Institute of Mechatronic and Information Systems, Technical University of Lodz, Poland
Vita Technology Private Limited, Bangalore, India
Room D - FENIX II +FENIX III 17.30h - 19.00h
POSTER SESSION PA
Room D - FENIX II + FENIX III
34
Chairpersons:
(Spain)
(Japan)
Dr. Ramon Bargallo
Prof. Dr. Katsuhiro Hirata
Saturday, 6th September 2008
POSTER SESSION PA.1
PA.1.1 -
PA.1.2 -
PA.1. -
PA.1. -
PA.1. -
Performance Assessment of a Single-Phase PM Synchronous Motor for Small
Fan Appliances
Experimental determination of the parameters for a Salient Rotor Synchronous
Machine with and without pole screens
Modelling of the closed rotor slot effects in the induction motor equivalent
circuit
Pilot research of the induction motor eccentricity phenomenon criteria by the
use of physical operational modeling
Comparison between hexa- and conventional E-type core three-phase
transformers
M. Andriollo , M. De Bortoli , G. Martinelli , A. Morini , A. Tortella , S. Bassini , A. Scala
C. Danielsson , C. Sadarangani
3
A. Boglietti , A. Cavagnino , M. Lazzari
4
G. G. Rogozin , D. Y. Osipov
5
S. Lundmark , Y. V. Serdyuk , S. M. Gubanski , B. Lärking
1
1
1
1
1
2
2
1
2
1
1
1
1
1
1
2
2
3
1
2
1
2
1
1
1
2
3
Dept. of Electrical Engineering, University of Padova, Italy
Everel Group, Verona, Italy
ABB Corporate Research, Västerås, Sweden
Royal Institute of Technology, Stockholm, Sweden
Dipartimento di Ingegneria Elettrica, Politecnico di Torino, Italy
Donetsk National Technical University, Department of Electrical Engineering, Ukraine
Dept. of Energy and Environment, Chalmers University of Technology, Sweden
Dept. of Materials and Manufacturing Technology, Chalmers University of Technology
Hexaformer Production AB, Västervik, Sweden
35
Saturday, 6th September 2008
PA.1.6 -
K. S. Khan , W. M. Arshad , S. Kanerva
PA.1.7 -
N. Naoe
PA.1.8 -
J. Royo , and F. J. Arcega
PA.1.9 -
A. Munteanu , A. Simion , L. Livadaru
PA.1.10 -
M. Rilla , J. Pyrhönen , M. Niemelä , J. Pekola
PA.1.11 -
L. Alberti , M. Barcaro , M Dai Pré , A. Faggion , L. Sgarbossa , N Bianchi
PA.1.12 -
C. Bastiaensen , W. Deprez , E. Haesen , J. Driesen , R. Belmans
On performance figures of multiphase machines
Self-Excitation Characteristics of a Hybrid Excitation Single-Phase
Synchronous Generator
Reversibility in the application of Machine Current Signature Analysis in
Squirrel Cage machines
Performance Analysis of a Hybrid Synchronous Machine under Generating and
Motoring Duty
Design of a 60 kW, 9000 rpm non-salient pole PM-machine
Experimental Tests on a 12Slot 8Pole Integrated Starter-Alternator
Reliability Analysis of a Torque Estimation Model
1
1
2
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
1
1
ABB Corporate Research, Västerås, Sweden
ABB Oy, Electrical Machines, Helsinki, Finland
Dep. of Electrical and Computer Engineering, Kanazawa Technical College, Japan
Electrical Engineering Department, University of Zaragoza, Spain
Lab. of Electrical Drives Tecnology, Lappeenranta University of Technology, Finland
ABB Oy, Helsinki, Finland
Department of Electrical Engineering, University of Padova, Italy
Department of Electrical Engineering, University of Leuven, Heverlee, Belgium
Electrical Engineering Faculty, Technical University of Iai, Romania 36
Saturday, 6th September 2008
PA.1.13 -
J. Kappatou , C. Gyftakis , A. Safacas
PA.1.14 -
J. Cardona , J. Barros , F. Mantilla
PA.1.15 -
T. Kano , T. Ara , T. Matsumura
PA.1.16 -
R. R. Moghaddam , F. Magnussen , C. Sadarangani , H. Lendenmann
PA.1.17 -
N. Gule , M. J. Kamper
PA.1.18 -
F. Ferreira , W. Deprez , F. Parasiliti , A. T. de Almeida , R. Belmans
A study of the effects of the stator slots wedges material on the behavior of an
Induction Machine
ATP Computer Simulation of Short-Duration Voltage Sags on ASD-PWM Driven
Induction Motors
New Theoretical Approach to the Synchronous Reluctance Machine Behavior
and Performance
Optimal Ratio of Field to Torque Phases in Multi-Phase Induction Machines
Using Special Phase Current Waveforms
Simulated and Experimental Evaluation of Steady-State Voltage Unbalance
Impact on the Performance of Different Induction Motor Types
1
1
1
1
2
1
1
1
1
1
2
1
2
1
1
1,2
3
4
2
3
1
1
2
1
1
2
1
1
2
3
4
Electrical and Computer Eng. Dept., University of Patras, Greece
Dept. of Electrical and Energetical Engineering, University of Cantabria, Spain
Dept. of Electronics and Computers, University of Cantabria, Spain
Dept. of Elec. Eng. and Comp. Sci. Nagoya University, Japan
Royal institute of Technology, Department of Electrical Engineering, Sweden
ABB Corporate Research, Västerås, Sweden
Dept. of Electrical and Electronic Eng., University of Stellenbosch, South Africa
Dept. Electrical Engineering, Engineering Institute of Coimbra (ISEC), Portugal
Institute of Systems and Robotics, University of Coimbra, Coimbra, Portugal
Dept. Electrical Engineering, Katholieke Universiteit Leuven, Heverlee, Belgium
Dept. of Electrical Engineering, University of L'Aquila, L'Aquila, Italy
A Method for Calculating Equivalent Circuit Constants of a Synchronous Generator
with Damper Using a DC Decay Test with Open and Shorted Field Windings
37
Saturday, 6th September 2008
PA.1.19 -
PA.1.20 -
PA.1.21 -
PA.1.22 -
PA.1.23 -
PA.1.24 -
PA.1.25 -
Investigation of Induction Machine Phase Open Circuit Faults Using a
Simplified Equivalent Circuit Model
Simulation of Different Types of Shaft Voltages and Bearing Currents in
Induction Motors Based on Relevant Circuit Models Including a Survey of
State-of-the-Art Developments in the field
Study on Reduction of Steady-state Impedance in Magnetic Shielding Type
Superconducting Fault Current Limiter
Vibration Sparking, an Ignored Damage Mechanism of High Voltage Windings
Some Aspects of HTSC Transformer Development
Magneto-Harmonic Model of a Dual-Frequency Single-Phase 27 kVA
Laboratory Multi-Windings Traction Transformer
O. Jasim , C. Gerada , M.Sumner , J.Arellano
H. V. Haghi , M. R. Feyzi
E. MUKAI , A. TADA
M. Liese
L. I. Chubraeva
J. El Hayek
A. Sikora , B. Kulesz
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
School of Electrical and Electronic Engineering, University of Nottingham, U.K.
Elec. Eng. Faculty, K. N. Toosi University of Tech., Tehran, Iran
Elec. Eng. Faculty, University of Tabriz, Tabriz, Iran
Faculty of Information, Sojo University, Dept. of Comp. System Technology, Japan
Electrotechnical Institute (ETI), Technical University of Dresden, Germany
Research Inst. of Innov. Techn. in Electromech. and El. Power Eng.,St.-Petersburg
State University of Aerospace Instrumentation, Russia
Dept. of Industrial Technologies, Electrical Engineering, University of Applied
Sciences Western Switzerland, Fribourg, Switzerland
Multi-phase rectifier transformer and their impact on traction lines voltage quality
Politechnika lska, Zakad Inynierii Elektrycznej w Transporcie 38
Saturday, 6th September 2008
POSTER SESSION PA.2
PA.1.26 -
PA.1.2 -
PA.1.2 -
PA.1.2 -
Effectivenes