pan=2 width=10 nowrap> « back to results for ""
Below is a cache of http://www.cross-automation.com/PDFs/SUNXdp11.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
A new M8 connector-type added to the DP-100 series! DP-11 -E-P-J
DIGITAL PRESSURE SENSOR
A new M8 connector-type
added to the
DP-100 series!
M8 connector type
M8 connector
G
1
/
8
male thread
M5 female thread
R
1
/
8
male thread
M5 female thread
Connection cable
CN-24A-C2 (cable length 2 m
6.562 ft
)
CN-24A-C5 (cable length 5 m
16.404 ft
)
Standard type
Conforming to
EMC Directive
Connection cable
The dual display means that the current value and the threshold value can be displayed at the same time to improve ease of operation and
visual checking.
Introducing a new standard in digital pressure sensor technology.
The current value and the
threshold value can both be
checked at the same time. You
can check and change the
threshold value directly, without
having to switch screens.
The main display changes color in the status of output ON /
OFF operation, and it also changes during setting. This makes
it easy to see the status of the sensor and reduces operation
errors.
Dual 3-color display makes operation easier!
DP-100 with dual display
Previous model with single display
Dual display allows direct setting of threshold value
3-color LCD display (Red, Green, Orange)
Note
current value
Current
value
Operate
MODE key
Adjust
threshold
value
Return to
RUN
operation
Press the button directly.
Man-hours
reduced by
Man-hours
reduced by
3
/
4
3
/
4
Threshold
value
SET: Orange
OFF: Green (or Red)
ON: Red (or Green)
During normal operation
During setting
Sub display
The cable can be connected by
M8 connection
In addition to the standard sensors which have flat-type plastic
connectors, the line-up now includes sensors with M8
connectors that can be connected using metal M8 threads.
Dual
3-color
display SPECIFICATIONS
I/O CIRCUIT AND WIRING DIAGRAMS
I/O circuit diagram
Terminal Designation
1
V
2
0 V
Standard type:
Comparative output 2
Multi-function type: Analog voltage output or External input
3
Comparative output 1
4
Terminal arrangement diagram
PRECAUTIONS FOR PROPER USE
Never use this product as a sensing device for
personnel protection.
In case of using sensing devices for personnel
protection, use products which meet regulations and
standards, such as OSHA, ANSI or IEC etc., for
personnel protection applicable in each region or
country.
The DP-100 series is designed for use with non-
corrosive gas. It cannot be used with liquid or
corrosive gas.



DIMENSIONS (Unit: mm
in
)
1
2
3
4
2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation
Incorporated
Non-corrosive gas
PNP open-collector transistor
12 to 24 V DC
10 % Ripple P-P 10 % or less
10 to
50 C
14 to
122 F
, Storage:
10 to
60 C
14 to
140 F
G
1
/
8
male thread
M5 female thread
Unit selection plate: 1
DP-112-E-P-J
DP-111-E-P-J
DP-112A-E-P-J
DP-111A-E-P-J
Rated pressure range
Applicable fluid
Supply voltage
Comparative output
Auto-reference function /
Remote zero-adjustment function
Analog voltage output
Ambient temperature
Response time
Pressure port
Material
Accessories
Connection cable (optional)
CN-24A-C2: cable length 2 m
6.562 ft
CN-24A-C5: cable length 5 m
16.404 ft
Standard
For low pressure
For high pressure
For low pressure
For high pressure
100.0 to
100.0 kPa
0.100 to
1.000 MPa
100.0 to
100.0 kPa
0.100 to
1.000 MPa
Multi-function
Type
Item
Model No.
Incorporated
Note: Where measurement conditions have not been specified precisely, the conditions used were ambient temperature
20 C
68 F
.
1 k
12 to 24 V DC
10 %
(Black) Comparative output 1
Load
Load
(White) Comparative output 2
T
r
1
Z
D2
Z
D1
T
r
2
Z
D1
100 mA max.
100 mA max.
(Blue) 0 V
D
1
D
D
2
(White) Analog voltage output
or External input
Load
(Black) Comparative output 1
T
r
1
T
r
2
100 mA max.
Standard type
Multi-function type
1
4
2
3
1
4
2
3
Users circuit
Internal circuit
Sensor circuit
Terminal No.
Color code of connection cable
(Brown)
V
Users circuit
Internal circuit
12 to 24 V DC
10 %
(Brown)
V
(Blue) 0 V
Sensor circuit
Terminal No.
Color code of connection cable
31.4 mm
1.236 in
"
4 mm
"
0.157 in
"
9 mm
"
0.354 in
Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure port: Stainless Steel (SUS303), Mounting threaded part: Brass
(nickel plated), Switch part: Silicone rubber, M8 connector part: Brass
nickel plated (Shell) / Brass Gold plated (Contact)
No.PCE-DP11EPJ
September, 2006
2431-1 Ushiyama-cho, Kasugai-shi, Aichi,
486-0901, Japan
Phone: +81-(0)568-33-7211
FAX: +81-(0)568-33-2631
SUNX Limited
Phone: +81-(0)568-33-7861
FAX: +81-(0)568-33-8591
Overseas Sales Dept.
PRINTED IN JAPAN
http://www.sunx.jp/
All information is subject to change without prior notice.
Pressure unit
Main display
Sub display
Out1 operation
indicator
Out2 operation
indicator or
analog output
indicator
Mode key
Increment
key
Decrement
key
30
1.181
47.5
1.870
15
0.591
7
0.276
7
0.276
25.5
1.004
9.5
0.374
4.5
0.177
1.5
0.059
G
1
/
8
male thread
A
14
0.551
20
0.787
20
0.787
M3 female thread,
4 mm
0.157 in
depth
M5 female thread
M8 connector
View A
30
1.181