.
The T-gard
TM
insulator products are available in a diverse range of
thermal performances to suit any application.
T-gard
TM
materials can be die-cut into any standard or custom shape.
Thermally Conductive Insulators
Features and Benefits:
Thermal resistance range from 0.13 - 0.60
o
C-in
2
/watt at 50 psi
High dielectric strength of >6,000 volts AC
Resistant to tears and cut through
Applications:
AC/DC power supplies
Audio amplifiers
Automotive
Power generators
UPS
T-gard
TM
Product Line
www.lairdtech.com
or visit:
www.lairdtech.com
For sales information:
In the USA please telephone +1-888-246-9050
In Europe please telephone +44-(0)-1342-315044
In Asia please telephone +86-755-2714-1166 T-gard
TM
Product Line
global
solutions :
local
support THR-SPEC-T-gardLine-0307
Specification
Units
T-gard K52
T-gard 20
T-gard 5000 T-gard 3000 T-gard 210 T-gard 500
Breakdown Voltage
50 mm probe
Volts, AC
6,000
9,000
>6,000
>6,000
6,000
>6,000
Volume Resistivity
Ohm-cm
>10
12
>10
12
>10
12
>10
12
>10
12
>10
12
Thermal Resistance
1
@ 345 kPa (50 psi)
o
C-in
2
/watt
o
C-cm
2
/watt
0.23
1.48
0.60
3.87
0.35
2.26
0.45
2.90
0.20
1.30
0.45
2.90
TO-220 Thermals
1
@ 345 kPa (50 psi)
o
C/watt
1.5
3.4
2.0
2.4
1.4
2.4
UL 94 Flame Rating
V0
V0
V0
V0
V0
V0
Temperature Range
o
C
-60 -150
-60 -150
-60 -180
-60 -180
-60 -180
-60 -180
Tensile Strength
mPa
93
138
40
52
5
9.5
Elongation
%
85
130
45
85
5
5
Reinforcement
MT Kapton
HT PET
Polymide Film
PEN Film
Fiberglass
Fiberglass
Coating Type
PCM
Silicone
PCM
Silicone
Silicone
Silicone
Thickness
inch
(mm)
0.003
(0.076)
0.003 (0.076)
0.005
(0.127)
0.005
(0.127)
0.010
(0.254)
0.009
(0.230)
Color
Amber
White
Tan
Brown
White
Brown
Standard Die Cut Parts:
Standard part sizes for T0-220, T0-247, T0-3P, T0-3PL, and T0-264
Custom Die Cut Parts:
Custom configurations available with standard tolerance of 0.020 (0.5mm)
Ability to handle drawings in multiple file formats. (.DXF and .DWG preferred)
Standard Sheet/Roll Sizes:
Contact a local representative for details
Pressure Sensitive Adhesive:
Single side adhesive available on request
Any information furnished by Laird Technologies and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials rests with the
end user since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability, or suitability of any Laird
Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products
are sold pursuant to the Laird Technologies domestic terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request.
T-gard Material Comparison Chart
Note1: Thermal resistance refers to the total thermal resistance of the material in the application. This includes material and interfacial thermal resistances.