order=0 cellpadding=10 cellspacing=0 width=100%>Yahoo! is not affiliated with the authors of this page or responsible for its content.
PINECREST


3.

4.
5.
6.
7.
1. WOOD: Western Red Cedar
check bOx
specify shutter
shutter WiDth
shutter height
quantity


When applicable
cOnfiguratiOn


1-3/8
2
#101-#113


lOuver
lOuver
2. check shutter Design

BRistol 1-3/8 x 3/8 fixed louvers

Bahama fixed louvers




does not apply

Center stile




does not apply






does not apply

doRset 2 x 3/8 fixed louvers

duRham fixed louvers

Raised panel (1) side

moulding (1) side

neWCastle fixed louvers

Raised panel (1) side

no moulding

nottingham fixed louvers

Flat panel

moulding (1) side

sheFField fixed louvers

Flat panel

no moulding

sussex fixed louvers

Raised panel (2) sides

no moulding

Chatham

Raised panel (1) side

moulding (1) side

suRRey

Raised panel (1) side

no moulding

CheshiRe

Flat panel

moulding (1) side

WindsoR

Flat panel

no moulding

yoRk

Raised panel (2) sides

no moulding
8. prime

prime exterior shutters
9. harDWare (not included)
10. rabbeteD shutters

Rabbet shutters.
11. beaDing

add beading detail to shutters.
12. cutOut

standard design no.

Custom design: send photo or drawing.
13. special placement Of (1) intermeDiate rail specify the exact
position in inches from the bottom of shutter to the center of
intermediate rail:





PINECREST
®
QuoTaTIoN/oRDER FoRM
FoR 1-3/8 ThICk ExTERIoR ShuTTERS
2118 Blaisdell avenue
minneapolis, minnesota 55404-2490
telephone 800-443-5357 612-871-7071
fax 612-871-8956, email: info@pinecrestinc.com
internet: www.pinecrestinc.com
oFFiCe use only
id net 50% pF paid d
dealer
address
City & state
telephone no.
Fax no.
order no. tag
ship to




date
signed By
pRint name
all OrDers must be signeD
14. shutter caps:
Copper

Warranty void for shutters supplied without capping.
15. faux cOntrOl rOD:


add control rod
16. request quOtatiOn fOr:


shutters over 36W and over 96h


Custom stile and rail sizes


nonstandard shutter thickness


Radius top shutters


louvered shutters incorporating storms and screens


south seas shutters


university shutters
17. Openings With untrue raDii require a carDbOarD, plyWOOD, Or mylar® template.



paper templates and cardboard templates which are bent and/or taped together are
not acceptable. the measurement from the bottom of the opening to the springline must
be designated.
please check all infOrmatiOn
yOu have given us tO ensure
accuracy. Once We have
receiveD yOur OrDer, there
Will be a $50.00 net charge
fOr each time alteratiOns
are maDe. in sOme situatiOns
Where the OrDer is alreaDy in
prODuctiOn, changes Will be
impOssible Or cOstly. 1. WOOD: Cherry mahogany (philippine) maple (soft) oak (red, plain sawn) oak (red, quarter sawn) poplar (stain grade) poplar (paint grade)



3.

4.
5.
6.
7.



check bOx
specify shutter
shutter WiDth
shutter height
quantity



When applicable
cOnfiguratiOn



1-1/4
2
#101-#113



lOuver
lOuver
2. check shutter Design

tRent 1-1/4 x 1/4 fixed louvers

hampton 2 x 1/4 fixed louvers

sutton fixed louvers

Raised panel (1) side

moulding (1) side

Castleton fixed louvers

Raised panel (1) side

no moulding

WaRWiCk fixed louvers

Flat panel

moulding (1) side

stRatFoRd fixed louvers

Flat panel

no moulding

edinBuRgh fixed louvers

Raised panel (2) sides

no moulding

Chatham

Raised panel (1) side

moulding (1) side

suRRey

Raised panel (1) side

no moulding

CheshiRe

Flat panel

moulding (1) side

WindsoR

Flat panel

no moulding

yoRk

Raised panel (2) sides

no moulding
8. prime

prime paint grade poplar
9. harDWare (not included)
10. rabbeteD shutters

Rabbet shutters.
11. beaDing

add beading detail to shutters.
12. special placement Of (1) intermeDiate rail specify the
exact position in inches from the bottom of shutter to the center
of intermediate rail:
please check all infOrmatiOn yOu have given us tO ensure
accuracy. Once We have receiveD yOur OrDer, there Will be a
$50.00 net charge fOr each time alteratiOns are maDe. in sOme
situatiOns Where the OrDer is alreaDy in prODuctiOn, changes
Will be impOssible Or cOstly.
13. special rail alignment


Consideration must be given to rail placement in
adjacent panels of varying heights (since center rail
placement normally relates to panel height). small
height differences also may result in noticeable
variation of rail sizes. therefore, if uniform rail size and
placement of unequal adjacent panels is desirable,
you must specify one of the following:
1. shutters are to align from the bottom up.
2. shutters are to align from the top down.
14. request quOtatiOn fOr:

shutters over 36W and over 96h

Custom stile and rail sizes

nonstandard shutter thickness

Radius top shutters
15. Openings With untrue raDii require a carDbOarD, plyWOOD, Or mylar® template.

paper templates and cardboard templates which are bent and/or taped together
are not acceptable. the measurement from the bottom of the opening to the
springline must be designated.
PINECREST
®
QuoTaTIoN/oRDER FoRM
FoR 1-3/8 ThICk INTERIoR haRDwooD ShuTTERS
2118 Blaisdell avenue
minneapolis, minnesota 55404-2490
telephone 800-443-5357 612-871-7071
fax 612-871-8956, email: info@pinecrestinc.com
internet: www.pinecrestinc.com
oFFiCe use only
id net 50% pF paid d
dealer
address
City & state
telephone no.
Fax no.
order no. tag
ship to




date
signed By
pRint name
all OrDers must be signeD
a
b
a, B, align from top down
B, C, align from bottom up
C, d, no alignment
c
D