Help for Webmasters « back to results for ""
Below is a cache of http://www.briggsandstratton.com/corp/feature/briggs-stratton_starting-process.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
STARTING PROCESS

8
BRIGGSandSTRATTON.COM

)
414.259.5333
STARTING PROCESS
PROCEDURE FOR SMALL VERTICAL ENGINES
(see page 2 for ReadyStart
®
and Electric Start)
WARNING
STEP

Locate primer bulb & push
primer bulb slowly 3 times
STEP

Depress safety bail
on mower handle
STEP

Pull the starter
rope handle
BEFORE YOU
BEGIN...

Engine may have shipped
without oil. Check the
engine oil level
before starting.
PRIME N PULL
STEP

Depress safety bail
on mower handle
STEP

Pull the starter
rope handle
READYSTART
®
STEP

If equipped - push primer
bulb slowly 3 times
STEP

Depress safety bail
on mower handle
STEP

Turn the starter key
ELECTRIC START
BRIGGS&STRATTON
CORPORATION
POST OFFICE BOX 702
MILWAUKEE, WI 53201 USA
414 259 5333
©2007 Briggs & Stratton Corporation