>
« back to results for ""
Below is a cache of http://www.huntdimming.com/downloads/10_MagFluorstfandwiringlk.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content.
'LPPLQJ















Hunt Control Systems Inc.
200 Rome Court
Fort Collins CO 80524








Tel: (970) 484-9048
Fax: (970) 493-4125
huntdimming.com








Dimming.
Its all we do.
Since 1960.
'LPPLQJ
Omega Series Controls
Architectural Full Range Fluorescent Dimmers
for use with Electromagnetic Fluorescent Lighting
120V and 277V




120V 277V
120V
277V
SCF-5
SCF-527
SCF-15 SCF-1527
SCF-10 SCF-1027



Product Description:
.


Commercial-grade wall controls for T12 fluorescent lamps (compatible ballast required-
see below).


Ivory and white standard colors; custom colors available.


No exposed heat sink.


Limited one-year warranty.


Features:

Easy-to-operate, smooth-sliding linear control.

Solid-state circuitry.

RFI filter.

UL Listed.

Fits in a standard 2" deep single-gang back box.

Maximum number of lamps controlled by one dimmer:
SCF-5, SCF-527: 12 lamps
SCF-10: 18 lamps
SCF-1027: 20 lamps
SCF-15: 28 lamps
SCF-1527: 30 lamps

Compatible Ballasts
120V
GE-Valmont 8G-1718
Advance Dim 240-H-TP (2 lamp)
GE-Valmont 8G-5001
Universal 550-L
GE-Valmont 8G-5007 (2 lamp)
Universal 550-L-TC-P
Advance Dim 140-H
Universal 502-A (2 lamp)
Advance Dim 140-H-TP
Universal 502-A-TCF-P (2 lamp)
Advance Dim 240-H (2 lamp)
Advance Dim 240-H-TP (2 lamp)
277V
Universal 679-L-TC-P
Universal 678-A (2 lamp)
Dimensions:
SCF-5, SCF-10, SCF-527, SCF-1027 faceplate dimensions: 3"W x 4 ½"H
SCF-15, SCF-1527 faceplate dimensions: 4 ¾"W x 4 ½"H
Backbox dimensions on all models: 1 5/8" x 2 5/8" x 1 3/8
"



















Hunt Control Systems Inc.
200 Rome Court
Fort Collins CO 80524








Tel: (970) 484-9048
Fax: (970) 493-4125
huntdimming.com








Dimming.
Its all we do.
Since 1960.
'LPPLQJ
Accent Series Controls
Architectural Full Range Fluorescent Dimmers
for use with Electromagnetic Fluorescent Lighting
120V and 277V





120V
277V
120V
277V
ASF-5
ASF-527
ASF-15
ASF-1527
ASF-5-3W
ASF-527-3W


ASF-10
ASF-1027



ASF-1027-3W



Product Description:
.


Commercial-grade wall controls for T12 fluorescent lamps (compatible ballast

required-see below).


Ivory and white standard colors; custom colors available.


No exposed heat sink.


Limited one-year warranty.


Features:

Solid-state circuitry.

RFI filter.

UL Listed.

Fits in a standard 2" deep single-gang back box.

Maximum number of lamps controlled by one dimmer:
ASF-5, ASF-5-3W, ASF-527, ASF-527-3W: 12 lamps
ASF-10: 18 lamps
ASF-1027, ASF-1027-3W: 20 lamps
ASF-15: 28 lamps
ASF-1527: 30 lamps

Compatible Ballasts
120V
GE-Valmont 8G-1718
Advance Dim 240-H-TP (2 lamp)
GE-Valmont 8G-5001
Universal 550-L
GE-Valmont 8G-5007 (2 lamp)
Universal 550-L-TC-P
Advance Dim 140-H
Universal 502-A (2 lamp)
Advance Dim 140-H-TP
Universal 502-A-TCF-P (2 lamp)
Advance Dim 240-H (2 lamp)
Advance Dim 240-H-TP (2 lamp)
277V
Universal 679-L-TC-P
Universal 678-A (2 lamp)
Dimensions:
ASF-5, ASF-5-3W, ASF-10, ASF-527, ASF-527-3W, ASF-1027, ASF-1027-3W
faceplate dimensions: 3"W x 4 ½"H
ASF-15, ASF-1527 faceplate dimensions: 4 ¾"W x 4 ½"H

Backbox dimensions on all models: 1 5/8" x 2 5/8" x 1 3/8
"



















Hunt Control Systems Inc.
200 Rome Court
Fort Collins CO 80524








Tel: (970) 484-9048
Fax: (970) 493-4125
huntdimming.com








Dimming.
Its all we do.
Since 1960.
'LPPLQJ
A-Line Series Controls
Architectural Full Range Fluorescent Dimmers
for use with Electromagnetic Fluorescent Lighting
120V and 277V





120V
277V
120V
277V
AF-5
AF-527
AF-15
AF-1527
AF-5-3W
AF-527-3W


AF-10
AF-1027



AF-1027-3W



Product Description:
.


Commercial-grade wall controls for T12 fluorescent lamps (compatible ballast required-
see below).


Commercial-grade, rotary design.


Heat sink fins break off for ganging.


Limited one-year warranty.


Features:

Solid-state circuitry.

RFI filter.

UL Listed.

Fits in a standard 2" deep single-gang back box.

Maximum number of lamps controlled by one dimmer:
AF-5, AF-5-3W, AF-527, AF-527-3W: 12 lamps
AF-10: 18 lamps
AF-1027, AF-1027-3W: 20 lamps
AF-15: 28 lamps
AF-1527: 30 lamps

Compatible Ballasts
120V
GE-Valmont 8G-1718
Advance Dim 240-H-TP (2 lamp)
GE-Valmont 8G-5001
Universal 550-L
GE-Valmont 8G-5007 (2 lamp)
Universal 550-L-TC-P
Advance Dim 140-H
Universal 502-A (2 lamp)
Advance Dim 140-H-TP
Universal 502-A-TCF-P (2 lamp)
Advance Dim 240-H (2 lamp)
Advance Dim 240-H-TP (2 lamp)
277V
Universal 679-L-TC-P
Universal 678-A (2 lamp)

Heat Sink Dimensions:
AF-5, AF-5-3W, AF-10, AF-527, AF-527-3W, AF-1027, AF-1027-3W : 3"W x 4 ½"H
AF-15, AF-1527: 4 ¾"W x 4 ½"H
Backbox dimensions on all models: 1 5/8" x 2 5/8" x 1 3/8"



Installation and Wiring Instructions

for
Architectural Electro-magnetic Fluorescent Controls
Single Pole and Three Way
120V, 60Hz

Models:
A-Line Series: AF-5, AF-5-3W, AF-10, AF-15
Accent Series: ASF-5, ASF-5-3W, ASF-10, ASF-15
Omega Series: SCF-5, SCF-10, SCF-15

These dimmers are designed for electro-magnetic fluorescent, permanently installed fixtures using an
approved ballast (see below) and rapid start 40 watt lamps.

Load: (A minimum load of two (2) lamps is required)
AF-5, AF-5-3W, ASF-5, ASF-5-3W, SCF-5; 12 lamps
AF-10, ASF-10, SCF-10; 18 lamps
AF-15, ASF-15, SCF-15; 28 lamps

Caution:
1). For personal safety and to prevent damage to dimmer, make sure that power is turned OFF at the circuit
breaker before installing dimmer.

2). To avoid overheating or damage to dimmer and other equipment, do not install unit to control a plug-in
receptacle, fluorescent lighting fixture, motor controlled appliances or low-voltage transformer supplied
appliance or fixture.

Notes:
1.) Fins must be mounted in vertical position and must not be recessed into the wall. When stacking dimmers or
mounting one above the other, allow a minimum of three inches of clear wall space between the upper and lower
finned plates.

2.) The aluminum chassis of this lighting control is designed as a heat sink to dissipate heat
generated by the proper functioning of the circuit components. The fins may be very warm to the touch when the
lighting control is operating at its maximum rated load. This is normal operation and does not indicate malfunction.

3.) Due to electro-magnetic radiation produced by all solid state lighting controls, the load, dimmer, and connecting wires
should be located as far away as possible from radios, intercom units or public address systems. Six feet is the
recommended minimum distance.

4.) Burn-in lamps at fullbright for a minimum 100 hours before attempting to dim and adjust trim.

5.) Dimmers may be ganged in any combination. See reverse for derating and wallbox size.












Compatible Ballasts
120V
GE-Valmont 8G-1718
Advance Dim 240-H-TP (2 lamp)
GE-Valmont 8G-5001
Universal 550-L
GE-Valmont 8G-5007 (2 lamp)
Universal 550-L-TC-P
Advance Dim 140-H
Universal 502-A (2 lamp)
Advance Dim 140-H-TP
Universal 502-A-TCF-P (2 lamp)
Advance Dim 240-H (2 lamp)
Advance Dim 240-H-TP (2 lamp)
Wiring Diagrams: See reverse side.

Hunt Control Systems, Inc.
200 Rome Court
Fort Collins, CO 80524
Ph: (970) 484-9048
www.huntdimming.com


Wiring Diagrams and Ganging Information
for
Architecural Electro-magnetic Fluorescent Controls
Single Pole and Three Way
120V, 60Hz


Standard Installation
Single Pole Wiring Diagram









Three Way Wiring Diagram




























Number of double gang units

0
1
2
3
4
0
_
1
3
5
7
1
1
3
5
7
9
2
2
4 6
8
10
3
3
5
7
9
11
Number
of
single
gang
units
4
4
6
8
10
12
Minimum size wall box required (in gangs)
LOW END BRIGHTNESS ADJUSTMENT
THE LOW END BRIGHTNESS IS FACTORY
ADJUSTED. IF NOT SATISFACTORY, IT MAY BE
TRIMMED AS FOLLOWS:
Rotate dimmer control knob to full counter-
clockwise (with unit turned on).

Adjust trim to
desired brightness with a