ice Product Brief
Idea and R.E.I.D. are valuable trademarks of Cooper Industries in the U.S. and other countries.
You are not permitted to use Cooper trademarks without the prior written consent of Cooper Industries.
RTDS is a registered trademark of the Manitoba HVDC Research Centre.
System Problem:
System Benefits:
System Protection
Solution:
Need to protect high value and long lead-time rotating equipment (generators, motors, pumps, etc.)
from unwanted or unauthorized manipulation of existing digital protective devices or systems, and
to isolate the equipment from the power system when such manipulation is detected.
Comprehensive isolation and protection of rotating devices is now possible with the iGR-933
R.E.I.D. Idea relay. This rotating equipment isolation device (R.E.I.D.) is a cost-effective, long-term
solution specifically designed to identify potential cyber attacks and take immediate action to
protect and isolate the affected rotating equipment.
Independent device monitors rotating equipment to detect unwanted or unauthorized
manipulation of existing digital protective devices or systems. Upon detection of an event,
immediately locks out the circuit breaker (or circuit breakers in breaker-and-a-half schemes)
to prevent damage to rotating machines, completely isolating it from the electric grid.
Easily installed and integrated into existing or newer systems. Requires no expensive or time-
consuming changes to the installed protective system. Does not require disabling of existing
relay functions, such as communications for remote access or the breaker close function.
Built on an existing, proven digital protective and control device platform:
Cooper Power Systems Idea relay.
Complementary device enhances North American Electric Reliability Council (NERC) Critical
Infrastructure Protection (CIP) requirement compliancy efforts.
Addresses many of the applicable mitigation actions from the June 21, 2007 Electricity Sector
Information Sharing and Analysis Center (ESISAC) Advisory:
Inherent strong password protection capability.
No communications access to eliminate the possibility of unwanted remote access.
Secure and locked software program has no hidden vendor access passwords.
Provides a long-term solution:
Fully developed and tested hardware and software solution available today.
Can be locally programmed with no remote access to programmable logic or set points.
Specifically designed to detect cyber attacks on rotating equipment.
Fully tested via Real Time Digital Simulator (RTDS
®
) and actual live tests at the Department of
Energys Idaho National Labs in 2007.



iGR-933 Rotating Equipment Isolation Device
Secure and protect your high value rotating equipment with the
Cooper Power Systems iGR-933 Rotating Equipment Isolation Device (R.E.I.D.)
Idea relay. Ensure comprehensive cyber security for rotating machines today. Printed in USA
Cooper Power Systems
1045 Hickory Street
Pewaukee, WI 53072
P: 877-CPS-INFO
www.cooperpower.com
November 2007 - Supersedes 09/2007
Contact your Cooper Power Systems representative or call 1-877-CPS-INFO
to learn more about the iGR-933 R.E.I.D. Idea relay.
B165-07042
iGR-933 Rotating Equipment
Isolation Device
R.E.I.D. Idea Relay
HV
Grid
Gen
LP
HP
Boiler
Plant Loads
(including motors)
Station Service 1
Station Service 2
Plant
Utility
Main
Turbine
Backup
HV Supply
230 kV
R.E.I.D. Idea Relay
R.E.I.D. Idea Relay
CB
CB
CB
CB
CB
CB = Circuit Breaker